This is done in preparation for Iac6205f to make it easier to review.
This patch here is meant to be a no-op that doesn't change anything,
just moves existing code around.
Bug: T307986
Change-Id: Ie6ccd9528e5799ba340fed344e1f47a443c2c51f
This is currently only handled in DesktopArticleTarget in teardown,
which happens after we've wasted time trying to update the page.
Also ensure we always reload on non-view pages on MobileArticleTarget
for other types of teardown (e.g. quitting the editor).
Change-Id: I7fb352fcacc8727bb113115e98af38a3940a8f9c
Follow-up for what was done in I37505af. I don't fully understand why
these two extras are sometimes needed and sometimes not. But this exact
combination of 3 properties is used in multiple places already, so
let's just do the same here.
Bug: T300008
Change-Id: I1eba5fc378475d365111add58a141c3114dc0118
This focuses on some scenarios that are
a) complex enough to be worth a test,
b) but simple enough so I don't need to spend hours on comming up
with a test setup. ;-)
This patch also simplifies the ARIA related code in
MWTransclusionOutlinePartWidget a bit.
* Check 1 of the 3 ARIA configs only. Only having one is already
helpful and should not be skipped.
* No need for the large conditional. setAriaDescribedBy() works fine
with undefined.
Bug: T291157
Change-Id: I142782ec9b96147de64497f4f6a373eae05b9c8e
The idea of the code under test is that it combines the results from
2 different API requests in a specific way. This is a first basic test
where both search results are small.
Bug: T291158
Change-Id: Ic4de57fb6b85afb952ea604769fddd06d44814c0
Will implicitly set a max width for the button due to the margin.
Long words will break in the middle of the word.
Also includes a shorter label.
Bug: T300008
Change-Id: I37505af8383d8c0c2bd4af3987ec5e2a3049688a
Will be removed when parameters are added. Needs different margins
depending on beeing shown in the single transclusion mode without
header or on multiple transclusions.
Bug: T300710
Change-Id: Ieb95d7276aa4d4b0fcbb74f87ab734e4a393dc21
Requires switchToFallbackWikitextEditor to return a promise.
We can now pass dataPromise to the progress bar shown when
switching editors, so it hides if the switch fails.
Also fix logic for when a failed load is not retried.
Bug: T306763
Change-Id: I752ca505e7957b392202d44455b1e21b6e50fa63
If links get pasted into VE and they lack a "//" in the `href`, they
are automatically considered to be "internal", thus being converted into
`[[...]]` wikitext links.
In case of pseudo protocols like `mailto:` this should not be the case.
This patch uses MediaWiki core settings to check if a `href` value is an
external protocol known to the application.
Bug: T297575
Depends-On: I2e584f6d5adc6b2d735e79cea64f2beeb5f2c36d
Change-Id: I2b383106450e02cc6bcc1b99d547ff2ed7832b4c
Before, the fallback algorithm was somewhat adaptive, trying harder and
harder the fewer CirrusSearch results have been found. This updated
algorithm guarantees that 10 results are shown.
Warning: You might see only 9 results. The reason is a bogus, unrelated
behavior in the mw.widgets.TitleWidget in core that's used as a base
class here. There is a "showMissing" option that's apparently enabled
by default, and prepends a non-existing title from the main namespace,
ignoring the "namespace" option. This extra result from the wrong
namespace is later dropped by the very same widget.
This code here sees 10 results before the bogus one is dropped.
Disabling "showMissing" causes other issues. We would need a series (?)
of custom hacks to work around all this, but this seems inappropriate.
Let's live with 9 for the moment.
Bug: T303524
Change-Id: I2c577c9ef2752b6c6cd360f4023e151e9272fcd5
The main advantage of this change is that it drops the assumption
that the index starts with 1. This is not necessarily the case when
we prepend extra search results. Dropping this assumption here allows
to simplify such code.
* The incoming list of pages is guaranteed to be an array.
* There is no point (any more) that could cause the array to become
sparse.
* Note we still make a copy of the `origPages` array at some point,
e.g. on `.filter()`.
Bug: T303524
Change-Id: Ifbd92bb052155c613d2ca21ab6d54a0b3ef28c0c
New changes:
72bd71dbc Localisation updates from https://translatewiki.net.
b7f38d993 Re-apply "Fix for showing "invisible icon" when root node is hidden""
Local changes:
* Ensure templates are attached to DOM before rendering invisible
icon in converter hack.
Bug: T305110
Change-Id: I0e4c02619b2a06b9932f214ae482093fdb0cb22c
This option is not only buggy (it just doesn't work when the namespace
option is set the same time), it is not useful in this context even
if it would work. It doesn't make much sense to suggest non-existing
templates in the context of the template dialog. If adding a
non-existing template really is what the user wants, they can still do
this by simply typing the name of the template and submitting the form.
We never need this to show up in the suggester below the input field.
The main advantage of this change is that is saves 1 useless API
request that's potentially done every time a key is pressed.
Bug: T303524
Change-Id: I903340a06d6e6490bb58f628f41903aa044ccb21
This separates the two steps:
1. See if items in the list of `origPages` miss their `.index`
property, and add it if possible.
2. Later code doesn't need to care about redirects any more.
Note that `origPages` is not used for anything else. And even if,
it's not wrong to have the index for each search result on both the
redirect and the redirect target.
Change-Id: I12135f0430c944b4e33c49ece7779d7c3bb6c211
This is not a pageid, but a simple numeric index in an array. Luckily
it doesn't make a practical difference for this particluar way of
iterating something.
Change-Id: I7ec9ace00d4fba7adde17670058a0365b30f5617
Such comments don't add any new information. The method signature
alone already tells the full story.
We did this already to a lot of the template related code we touched.
This is just a bit of cleanup to make it consistent.
Change-Id: I932b620910924a16dc0d31d6c8a3ab11818316fe
The numeric part of these ids is never used on it's own. There is no
need to expose it.
Note we renamed the method not long ago in I6eeab8b to reflect better
what it does. This is the next step. We just forgot it back then.
Change-Id: I5da82855e99ea3a42a5d91379c6974ae9c154518
The result is guaranteed to be in formatversion=2, where the list of
pages is an array, not an object.
Change-Id: Ic73a68c3e249a70108a6a19a89f4ff6c475794ed
The goal is to have some tests fail if a new property is added to the
API result, but it's not stored in auto-save data.
Bug: T305225
Change-Id: I9ac328c71c616a8f33e1cfb39431cd9a665adafc
The refactor in I0eaeb987 broke this feature by moving
the call that modifies the response object to after it
is passed to the target.
Change-Id: Id98c1ccabde478540af34ed3356f319ae336590a
New changes:
91a762803 ve.dm.ModelRegistry: Disallow unknown types on tag and tag+func matches
8575e8ad8 PreviewElement: Document event
d24f96874 Allow unknown types for ve.dm.AlienMetaItem
106354b38 Follow-up I534ce003d: Fix height restriction calculation of desktop context
Local changes:
* Allow unknown types for ve.dm.MWExternalLinkAnnotation, it is meant
to match all <a> tags and handles unknown types in toDataElement()
Depends-On: I785be75f389136769084a8e14832a09e3a519fc1
Bug: T303298
Bug: T304847
Change-Id: I75d1e82a43f5f96a9093cd334c524527918efaa5
This was added to make the context a bit more consistent
with the regular link inspector, however with I2fec865570
we making these delete buttons strictly mobile only.
Change-Id: I52936919e332aee851ccd11a862367c97eb41b39
This code is optimized for the 2 most relevant use cases:
1. When Cirrus finds 10 results, we still want to search for the top 1
prefix match. This is critical for templates like !!. This will appear
at the top. unshiftPages() makes sure the limit of 10 is enforced.
2. When Cirrus fails to find anything, we search for 10 prefix matches
and use these instead.
The code can also handle everything in between. For example, when
Cirrus finds 5 results, we search for 5 more prefix matches and add
them when Cirrus missed them. The total number in the end might be 5 to
10 depending on the number of duplicates. This is intentional. Why?
Let's say we always search for 10 prefix matches and add them to the
top when Cirrus missed them. This might remove _all_ Cirrus results.
This shouldn't happen. This extra code is only to fill in glaring gaps,
not to replace Cirrus. 5 results are fine.
Bug: T303524
Change-Id: Ib0471795124c0c7001b6901edaf8e7b380e426b1
There is already some kind of "fallback" to prefixsearch. We always
check if the top-1 prefixsearch result is part of the result set.
Because of this the current worst-case scenario is that only this
1 result is shown.
This patch implements a full fallback to prefixsearch. But only when
there are 0 CirrusSearch results. Further tuning might be done in
later patches.
Bug: T304925
Change-Id: I1927eedad60c9b9ac2021481a85376c08ccf6fdb
.test() is the dedicated syntax for a boolean "does match? yes/no?"
check. .match() returns an array of matches, or null. This is just not
needed in these situations.
Change-Id: Ibb996ab843d1a6c7d7af98d6a112990665d543b2
Also invert logic and rename variables to make tests in tryTeardown
and switchToWikitextSection identical.
Bug: T294463
Change-Id: Icb86a676c3f315e4a3d229f46eb383dcd7959973
We ended mixing two concepts in a single method:
* We need a method that allows us to create the parameter list widget
when it's needed, even if it's empty. This is relevant when a template
is entirely empty, and the first parameter is added. This wasn't
working. Instead the parameter list was created with all parameters.
* On initialization we either want all parameters to be shown, or only
used ones. But this code is only needed once, on initialization. I
ended inlining this code in this patch.
Bug: T300640
Bug: T304046
Change-Id: I6620a870e4420dcb8fecf522b3274458eeec891d
A class, mw-broken-media, was added in
I92359048b42d32fe8a0f2cb79cd348cf5f2c56cc
Bug: T304010
Bug: T270150
Change-Id: I542d7d879868c9030ce00b2686cdfd0077e49491
These two lines forcefully enabled the review/preview buttons, even
when the review/preview panel is already active.
Bug: T300448
Change-Id: I6dbe6ee88728a65233a455b768f17bff668fe3a8
In the mobile view, parameters don't have left padding so some styles
should only be applied to the desktop stylesheet.
Bug: T304167
Change-Id: I1846512c21aae36f212fe142b7d96ac91e46854b
Currently in VE desktop, items which can be deleted with
delete/backspace do not have this button. If that situation is
considered a problem it sould be solved consitently for all
focusable nodes as part of a wider fix.
Adding a delete button to template contexts makes them inconsistent
with other focusable nodes.
Bug: T274263
Change-Id: I2f7508a605852274ba8f40b2afd1dfd56600aa36
This fixes a styling issue with inline descriptions, for the scenario
when the inline description feature is enabled but the new sidebar is
disabled.
Bug: T304167
Change-Id: Ida4da4605da5143de2a27725d87d5876aea7065c
The Apex skin (not to be confused with the Apex OOUI theme)
is abandonware. Keeping files around that pretend to support it
is just maintenance debt.
Change-Id: I176e4e25307ab8ca4166a6e9b55e3bec4f058d05
Parsoid added a class and, without it, we get selser complaining
about wrappers being modified, similar to T214649.
The "image" class is removed since Parsoid never added it (although it
now has "mw-file-description" for a similar purpose) and the legacy
parser doesn't apply it indiscriminately.
It doesn't seem like VE supports editing the |link= media option; it
just tries to roundtrip what's there and drops it on edit. The patch
here works with that limitation.
Galleries are found to drop href's, breaking selser, and should be fixed
in a follow up.
Bug: T292657
Bug: T303469
Change-Id: I92359048b42d32fe8a0f2cb79cd348cf5f2c56cc
Due to the stickyness we need to scroll the header and the first
visible item from the parameter list to have the best result in all
cases.
We also only want to scroll when the user triggered hiding the
fields. Not when the template outline view is initialized.
Bug: T302965
Change-Id: I84d293888a7dbf13ec655c293c0fc3a79edca698
It removes some indirection.
* Find: \$\( '<.+?' \)\.toArray\(\)
* Replace with: $.parseHTML( \1 )
(also replaced a few by hand that weren't caught by that regexp)
Change-Id: I2639cc4a26bc960046a189504dd8058344e14d60
New changes:
cf7b2a9c4 Restore margin between wrapper paragraphs and document edge
629109b6b ve.ce.Surface tests: Sometimes assert originalDomElements in paste tests
3a5bd323c Use wrapper paragraphs in fixUpInsertion
Local changes:
* Update tests to ignore some internal properties
Bug: T299815
Bug: T299817
Change-Id: Ie52348f62320eb135c2f950ac78a77d9c665fef2
This was added back in 2020 so mw:DisplaySpace would work while the
RESTBase cache still contained old data. It's been two years, it should
be good now.
Follow-up to ed3579245e
Change-Id: I65665231b78198633682d52c48068c89807df55e
Once we determined a link is internal from the first regex, we don't to
check if it matches the wgScript path as well. This would cause
"/index.php/Article" style paths to be detected as external as they failed
this second check.
Change-Id: I560d8080c513c523c68f2750be332e9fd91de192
This logic has been moved to the relevant extensions which can
now disable VE using a hook.
Depends-On: I47880be15b6ce1a93f389a32aff304cc3b798bcb
Depends-On: If188e8fcceb248738fc625ddd5afec351c01c484
Bug: T174180
Change-Id: I245295373af3caffb1d4cbc288e8d2bd008520b7
* I can't guarantee this fixes T301914. But I suspect the bug can not
be triggered any more with this plus If9b6050 in place.
* I wasn't able to reproduce the issue locally. But I learned that
1. it's related to the hotkey, and
2. it's because the dialog looses focus, and the focus ends on the
VE surface in te background. Pressing Esc there closes VE. That's
intended behavior.
* I tried to use .trigger( 'click' ), but it doesn't make much of a
difference. The only magic check is if the button is disabled. But no
visibility checks are done.
Bug: T301914
Change-Id: I2f66fc2411144c60cd08baae58452d336b4e9802
In a test case with 200 templates where all but a few parameters are
unused the loading time is cut in half.
Bug: T300974
Change-Id: Ice850cb9e5e95b9e3a19ff511b3a4f32117c7199
Our theory is that browser plugin spam shouldn't reach
the DM document unless we've made a coding error like
I194ff1d57. Log future errors so if there is more plugin
spam in the future, we can investigate the cause.
Bug: T298147
Depends-On: I705195bc5d0f76a38da5d2cc09fab184a2c32401
Change-Id: I3403859906ceaa51be63b0d79f474f0289ab4408
Same random finds while working on something else. I carefully
checked and made sure these methods are actually called without the
optional parameter.
Change-Id: Iab36fd130258322985b5d6e7f8e1f7b4ee235ba2
This focuses on a few trivial cases where the syntax helps making
the code more readable. One level of indirection is gone with this.
Change-Id: Ibf25d7eaa06952e69b36bd5a78a48d04ac62890c
These are only needed when we need to access a specific `this` from
within another `function () {}` context. This is not the case in the
situations here.
This is split from Ibf25d7e to make it smaller and easier to argue
about.
Change-Id: Ide1476de91fc343aa992ad92a1321d3a38b06dd0
The `.` character class matches any character *except* line terminators,
but edit summaries can contain those. Use [^] to match truly everything
in the comment part. (In the section part, I assume `.` is okay.)
Bug: T302103
Change-Id: I29fcdd7489d118674bab5cfe5c0a15b8e4efac64
Passing the useskin parameter ensures that output hooks are run
on the new page HTML. This already happens because we request
the 'subtitle' and 'categorieshtml' props which also trigger
skin mode (along with the 'headhtml' which we don't request).
However it is better for us to be explicit that we want the rendering
for a specific skin, rather than relying on these props to trigger
the correct mode.
Also pass through mobileformat param, which is added by a hook
in MobileFrontend.
Change-Id: I1cd2c5c5c13ae0b90cc32e441b453532343a434a
This ensures the full loading sequence is shown when the
user opens VE using history navigation.
Bug: T301843
Change-Id: Ia7a641c8bd5a036f23c9da94bc539d8cf66c5021
Previously we were adding an event listener every time the
target was opened, and not removing the old ones.
Change-Id: I0ce609f1d9e2d6fb00b605dcade6f27e7a887b9d
Found via Iaf989bc50363a (patch set 6):
> FAILED TESTS:
> ve.init.mw.DesktopArticleTarget
> ✖ init
> Died on test #1
> TypeError: Cannot set property 'pageLanguageCode' of null
> at Object.<anonymous>
Bug: T89434
Change-Id: I8ad2cc4c115224eb276d1488091b9518fde739f9
* Append the toolbar before starting the scroll
* If the toolbar is floating set the anchor to full height
immediately. This shouldn't cause the content to jump down
due to scroll anchoring:
(https://developer.mozilla.org/en-US/docs/Web/CSS/overflow-anchor/Guide_to_scroll_anchoring)
But add our own logic for it for browsers which don't support that.
* Now the browser only has to deal with the scroll animation,
and not the height animation of the toolbar anchor at the
same time, making it smoother and less buggy.
Bug: T301773
Change-Id: I61d533d40758d559b03c858e0006ef2e4f0fcd16
Previously, a toolbar with the extra tool could be shown for a moment
while the editor was loading.
Bug: T301626
Change-Id: I7f5d01ef6e64ef85141a38a236fe2a1d1ada00e8
When the editor is loading, and the browser window is narrow enough
that we should use the narrow toolbar, the wide toolbar would appear
for a moment. It was particularly jarring when it caused it to wrap
over two lines.
Bug: T301626
Change-Id: I551a66edab40235c4a26751eed163b5b30ef698f
Make sure it works on pages which don't trigger DT, such as full-page
wikitext editing.
Bug: T301497
Change-Id: Id3d46eef319f278ee71fbbedbddd16d5ffd540d8
* Pass 'noPrompt' to #tryTeardown
* #loadFail gets triggered by the data promise being aborted,
so if 'activating' has been cleared at this point, don't
prompt about there being load error.
* Retry/cancel dialog assumed you were coming from a wikitext
editor. Rewrite the logic to handle teardown the target if
the user is coming from read mode.
Change-Id: If9e5d1fbf00f8359f4d06fe7fc3064cc7e349bc9
I bit more logic was needed to make sure, the state of the widget
resets when all unused fields are added during search.
Bug: T299811
Change-Id: I3006c233fda5490e323bc3a3e631bf0c1199bda3
Covers the base functionality to hide the parameters. Performance
optimizations could be done in a follow up.
Bug: T300640
Change-Id: Ia99b5da392273f1445e475a0720a656460612dcf
The behavior is now consistant with what would happen when the
buttons are triggered.
Instead of emitting a button click I directly wired the methods
that will by triggerd by the click. This might make it easier to
remove the old sidbar later.
To avoid movement when the buttons should be disabled, an
additional check was added to the onMove method. It's not identical
to the more complex check in the outlineControlsWidget, but should
be enough for our use case. The onDelete method already just does
nothing if nothing is selected.
Bug: T300971
Change-Id: I8a278c9657c91fd648944b5a8c1204c9fff75b7e
This option was added in 0.43.0. Now that the close button is handled,
the remaining functionality (store a flag in local storage, and fixing
link targets) doesn't really justify a separate class, especially as
it's currently only used once.
Change-Id: I0fd81cadccc077dbf957302f9f41409c5a1f4f20
Previous attempt in 005a8d24ef,
reverted in 3c1d167b33.
The deduplicateStyles() function lacked a check for fosterable
positions, which caused T299767. This is now fixed.
Also added tests.
Bug: T287675
Bug: T299251
Change-Id: I0d22be9b66d26d09373cee63dd6ce52c1659e62d
This prevents an unwanted scroll when the main edit link is used
and the first section is below the viewport.
Change-Id: Ib99ebe2dc5c105c3fcbd687ef5740166267f5536
This doesn't change the position of the loading bar, but it keeps it
still if any scrolling happens. Previously we expected the user probably
wouldn't scroll while VE is loading, but in subsequent commits we
will trigger automatic scrolling in section editing mode.
Change-Id: I1404ccd77583d808ef79291c6cb4f561e76bd41c
We introduced these methods in Idc0cccbe but didn't update this
logic in MW.
This prevents focus being put inside an image caption if the section
starts with a block image.
Change-Id: I4cc1a116c1dcc8e1c642359ea768b6f5265a061b
Parsing it in the RL module caused the module cache key to depend
on the parse, which is slow and makes ResourceLoader sad. The usual
approach for solving this (I206bb05d28) can't be used, because of
how EditPage generates this message.
Bonus #1:
Generate the message for the correct page title. MediaWiki allows
customizing it per-namespace or even per-title, which we haven't
supported before.
Bonus #2:
Pass the context for message localisation (depends on I5f7c77970d).
EditPage::getCopyrightWarning() was parsing messages without the
interface flag, causing some needless processing elsewhere.
Depends-On: I5f7c77970d0525c0ff394f8bd72c69dcb5d00623
Bug: T298822
Change-Id: Iaa626f0e6379a5a370f9c465cea8528bb5bde7f7
New changes:
e5963f084 DiffElement: Remove doc-child-change wrappers
90a359f79 Follow-up Ia593dad8: Use modifyData when sanitizing
f5c7f0f20 Localisation updates from https://translatewiki.net.
Local changes:
* Update tests for the removal of doc-child-change wrappers
Change-Id: Ib29f23625de9151d50e0f3b7796b15ca9ed89133
Do show a confirmation when editing templates without parameters,
but don't show the confirmation when you're only on the template search
page.
Bug: T299394
Change-Id: I8205bb6a0f92b7b535a80f7f6a43674f1aa5b51b
We were using addItems() incorrectly, and it stopped working after
change Ib1241f93d214e8a7d2f757a120f84de3879575af in OOUI.
Bug: T299818
Change-Id: I2d00cb929673a419789ca6f8bc308721373e1da8
The only places where this dialog is used now will have the same
button labels and format. We want to use "normal" destructive here
so no additional "primary" styling.
It seems that the focus on the action will only be applied
automatically when it is primary. So extra code is needed.
Bug: T299647
Change-Id: Ib5250b79e85d27ea197b83c6380863d0749e5d89
The search field is of not much use when there is not really anything
to search. It wastes more space than the actual list of parameters.
Approved by UX, see T298259#7626538.
Bug: T298259
Change-Id: I01784a1c463d8b0b504897b20179719f91597d19
For most nodes, isDeletable() returns false on desktop and true on
mobile. Change e0bbf0b979 meant to
change the desktop version to depend on the new config settings, but
accidentally changed mobile too.
Bug: T298828
Change-Id: I8ec5e8031a27eee18c16dfcd267937cc76722c50
Double clicks have been tracked as "window-open-from-command", but are
now tracked as "window-open-from-context". This patch changes this
back.
Bug: T297773
Change-Id: Icabc5db526c35d681d077043c54ca009b2296bbe
The first click opens a little context menu (…ContextItem in the
code). This patch makes a double click trigger the "Edit" button in
this context item instead of executing the "open window" command
itself. This is needed to trigger the "Loading…" code in the context
item.
Bug: T297773
Change-Id: Ie1daa2e6b460c5c506a847bd767af2cb48e73a61
From the user's perspective nothing changes. A template without
parameters doesn't show anything. (Technically there was an empty
<div>, but it doesn't do anything.) The moment the first parameter
is added the required sub-widget is created and available from there
on.
This saves loading time and memory, especially when a multi-part
template contains many templates without parameters.
Bug: T298259
Change-Id: Ib1bd2cd0be4fece4acc92e6e5f63133a7986cf81
The checkboxes are actually indented a bit more than the search box
with this change the extra indentation is applied and the hide
button text is alligned accordingly.
Bug: T298259
Change-Id: I5508ab883c23e7285c023dc127529ffa4dbe58c7
From the user's perspective this is the same as before: When a
template doesn't have any parameters, there is no search field. The
moment the first (undocumented) parameter is added the search field
appears.
This is just delayed now. The widgets are only created the moment
they are actually needed.
This saves loading time and memory, especially in a multi-part
transclusion with many zero-parameter templates.
This also makes it a lot easier to change the minimal number of
parameters from 1 to e.g. 4.
Includes reverting the flexible header composition done in
Ib050e30a50ef965c1524e977d3a600c3ff836774
Bug: T298259
Change-Id: Ied7541d8d5c0b478a439dd31ce072e634287f181
The search field will stay at the top of the window while scrolling a
single template. In multi-part transclusions, the header will also
be sticky.
Hides the template header in single-part transclusions.
Bug: T298618
Change-Id: Ib050e30a50ef965c1524e977d3a600c3ff836774
Reuse the back button confirmation dialog for the close button. The
condition is slightly different: need confirmation if there are any
manually-entered values for any parameter AND the user has edited
the template in this session.
The "reset" action was synthetic, only used internally and not
connected to buttons or menus. Canonically, action='' is the close
action for OOUI.
Bug: T297792
Change-Id: I4ff644c7ab24ed9ba1a4c27d762563c5d6771cfc
* Find the first section below the top of the viewport
(usually visible) and measure its offset.
* After loading the editor, ensure this heading is still
at the same position on the page.
Bug: T296910
Change-Id: I9a05ea74ba3c19a4a91ddc1bc0afe311851c53e6
Without changing behavior, consolidate the logic for detecting
whether the editor has made changes to the template. This is
responsible for enabling and disabling the "Apply changes" button.
Change-Id: Ic4755b13f30fb738a7cb1eebaddef0435ea61d34
Currently, the insert template dialog includes a back button in the
upper corner. Confirmation of abandoning unsaved changes was
accomplished in an overlay panel. This patch rewrites as a dialog
and updates the on-screen text.
Bug: T297792
Change-Id: Ifa2ff97c9284609ee2a784f455789c56a762ba50
* Use this.getElementWindow
* Use this.surface.padding to avoid race condition
when the toolbar hasn't fully rendered yet.
Change-Id: I055b1d9458d73e435ede6096941a3e72c9c1ce74
This prevents your preference being changed if you just
followed a link with a diffmode parameter.
Change-Id: I755563bde285e95c0367119d49a40e1dd3c5e178
This is guaranteed via ve.init.mw.Target.getContentApi(). But the
ContentTranslation extension replaces this, and does not set a
formatversion. See e.g. SectionTranslationTarget.getContentApi().
Bug: T298599
Change-Id: I8768cae3153e9cbc29a8796ec21ef249f80471ed
In case the save is triggered without the save dialog (for example, when a null edit is made during suggested edits task in GrowthExperiments)
Bug: T298552
Change-Id: Id49b967cfa52d33848e9c911086000fa4501fa7f
It's not a getter, but a generator. I found the name confusing.
Getters typically don't return something different every time you
call them.
Change-Id: I6eeab8b6a8644e430003f6e1ad77ab4b28e0d8c9
Prevents accidentally treating plain text or user input
as HTML, which could be an XSS vulnerability.
Change-Id: Id4af48447a0907962a57340cb60aca08df9cc505
* Fix incorrect use of .append() instead of .text() (which was causing
some l10n messages to be treated as raw HTML)
* Avoid escaping and parsing HTML several times when plain text was
intended
* Remove some unused options and variables
Follow-up to 839b64d882.
Change-Id: I124257c73fe09713afefccdec8e90200e6ae433d
The "Add parameter" page always starts collapsed. Even if a template
doesn't contain anything but this. But most of the content isn't
visible, unless the user presses the button. It's not only a lot of
content, it's also rather expensive, including .parseDom(),
LinkCache.styleElement(), and ve.targetLinksToNewWindow(). This adds
up in large multi-part transclusions. In an example with 200 parts
the total blocking time goes down from 2.9s to 2.4s. Which means this
is not a major bottleneck, but still worth it.
Bug: T296335
Change-Id: Ieab9fd35d145142b04d2267d8e5a2e10a4c02784
* Make ve.ce.MWBlockImageNode autofocus=false, remove
unused transition property
* Remove ignoreChildren from ve.dm.MWBlockImageNode
based on new definition
* Remove tests which assert that deleting in a list next
to a block image always de-indents. If this is desired
behaviour it should be fixed without reference to
ignoreChildren.
Bug: T295905
Depends-On: Idc0cccbe73d1b49d07b60c14a192a40f47d64608
Change-Id: Ib79a070f5d36dbe7742fa0760f8cdf55fe3046ed
These pieces are only relevant when the new "inlineDescription"
feature is enabled. In other words: This can't have an effect on
the old dialog.
The 2.5em left and right are from an old styling when the
parameter pages have been indented.
Change-Id: I022b0dd94ee66f7de114c055c3f453317a7f6131
This sorting algorithm was introduced via Ic6bc348 (T274544). Note
there is no index parameter in the .onReplacePart() handler at this
point. When a part was moved, it was removed and simply appended
to the end. The additional sorting was needed to move it back to the
correct position.
This changed a few days later via Iafe29f1. There is now an index
parameter. The .onReplacePart() handler does the same as before, but
puts the part at the correct position right away. The additional
sorting is pointless since then.
The removed code alone is responsible for 1/3 of the total blocking
time when the template dialog opens.
Bug: T296335
Change-Id: I6c3fa70b532d34cd29d59c3b48ab81ebf608d548
onReplacePart is being called when templates are being moved up or down.
To prevent that the multipart message gets moved around passively e.g.
by one element being added above it, this patch adds it to the top after each movement.
Bug: T292829
Change-Id: I946c9bc4ba5e1d261aefbb28a8c642bb58964842
We forgot change the way that message is build while adding the link
in 07f105fd7. Now it gets parsed correctly and the link will open in
a new tab.
Bug: T284985
Change-Id: I1ed9dfdafd08d08c5aff45f4b74c540b35ec14a1
This is only relevant with the old design. It's only noticable when
a field shows all 3 action icons: info, raw wikitext mode, and
trashcan. The last icon can wrap to the next line when the screen
is very narrow.
I tried to apply nowrap, but this causes other style issues.
Removing the arbitrary width allows the action container to be
as wide as it needs to be. I can't tell why this restriction was
there. It is in no way necessary, as far as I can see. I can only
guess it's a temporary artifact from when the dialog was designed.
Bug: T296730
Change-Id: I77129ccc3afe002ba697b1787b41d0a388d5f4b8
This does have a significant impact on the performance of the
template dialog. Not only on construction time, but also because
MWExpandableContentElement objects do some quite expensive
.updateSize() calculations the moment they become visible.
I profiled a template with (only) 200 undocumented parameters.
Construction time goes down from ~600ms to ~520ms. The mentioned
.updateSize() runtime goes down from ~300ms to ~10ms.
Bug: T296335
Change-Id: I280f814e722b299aae0ec6a5a2fa59292e3e5887
This doesn't have much of an impact on performance according to my
profiling. But I think it's worth it nevertheless. The idea is to
skip that <div> entirely when it's empty.
Bug: T296335
Change-Id: Id155725fbc2e3453acc1cdcabfdc2d687285d694
In OOUI the close button is always on the left side. See
https://doc.wikimedia.org/oojs-ui/master/demos/?page=dialogs&theme=wikimediaui&direction=ltr&platform=desktop
The CSS hack to move it to the other side doesn't work and must be
removed. You can see the problem the moment the text is longer (which
can easily happen in translated versions).
I tried to come up with a more official way to move the button to the
other side, but gave up. One way is to replace the existing
flags: [ 'safe', 'close' ]
with:
flags: [ 'primary', 'close' ],
framed: false
But this causes other style problems. Let's remove the bogus CSS
first and possibly try again in a later patch.
Bug: T294839
Change-Id: Ia6ddefd99e4a03a87b0450ab94712ff19bb268e4
There was a remaining issue when the window was made very narrow in
desktop mode (smaller than 500px). This patch doesn't aim to really
"fix" the dialog's design in this case. The goal is to make the popup
window appear less broken, so the text can stil be read and the
buttons clicked. That's all.
This patch should not have any effect in:
a) mobile mode,
b) desktop mode when the window is wider than 500px.
Bug: T294839
Change-Id: I3171dbb991533b91eaadba63b78d0ff40aa486dc
Same as I980b72c, but with another shortcut. Again. We tried
Ctrl+Shift+X before (conflicts with RTL feature in VisualEditor), as
well as Ctrl+Alt+D (conflicts with "hide all windows" incUbuntu).
Bug: T294905
Change-Id: Iae7ba759fcd7c107ef586bd5d9ae3cdbe445cedc
Allows setting aria labels and descriptions on elements in a
convinient way. I did not use the the .mixin. convention here for
because there's already another mixin in that folder that's also
not having .mixin. as part of its name. And then there's also no
no need to open up that extra namespace here.
If we move this upstream at some point this can be changed though.
Bug: T291284
Change-Id: I1b3d40400d539f851f13719e16ced200968a7f92
When changing the source in the described-by attributes the screen
reader will read the text of the new source when the status changes.
Just changing the text within the elements holding the descriptions
does not work.
Bug: T291284
Change-Id: I31cc3061cf6c1f699babe41e99e0711f0eb03646
Screen readers will read the collapsed content despite the fact that
it is not visible due to the way it is hidden with CSS. The more button
makes no sense for these users and is probably more confusing than
helpfull.
Bug: T291277
Change-Id: I71888d8b9565d5ee85c5e7a48965e9e9a76eb984
ARIA-selected only works on specific elements/roles. I tried several
combinations here, the most fitting seemed to be the option role, but
that role did not work very well in FF with NVDA. It also should only
be used as direct child to a listbox e.g. with several children.
The next role that's working with ARIA-selected that seemed fitting
is the gridcell. It's still a bit hacky but works well in IE and FF
with NVDA. I suspect that that's pretty good coverage already then.
Bug: T291284
Change-Id: I85c865b0ab12d3923e472e5f36b5c07b7c722180
The following keyboard combinations are now supported on MacOS:
1) CMD + DELETE
2) CMD + DEL
3) CMD + FN + DELETE
(1) for keyboards without a DEL key use DELETE/BACKSPACE
(2) for keyboards with a DEL key
(3) FN + DELETE is a built-in an alias for DEL
Bug: T294519
Change-Id: I896837954b2f0b36a25484080e57d929a5abf774
For example, the Citoid extension adds a "change reference type"
button which should be visible when editing a citation template.
TODO: Decide whether we want to hide the "hide options" button in
this case. This should be handled in a separate patch and possibly
in a follow-up phase, it requires deeper changes to the logic.
Bug: T294351
Change-Id: I1c6c322fe48044d7e726bf20ba7cd2eda422cd8b
I can't reproduce this error, but I feel better having this safe
guard in place. In theory it's possible to trigger resize events
before the TransclusionModel is initialized.
Change-Id: I4bbac0f73873813629ff854ee728465c6e2a4ba7
I6909b3f0b2c153b7ee9995441e995ffa793eab40 was rebased, but
I0226ca7d39e04a69617c0d8a5d3c293cfc9e0709 was merged in the meantime.
Bug: T293202
Change-Id: I3cfec9ebc135eaf998a0982f458cfe75bfb2f01c
We're mainly interested in the layout of a button here. From a
semantic perspective this is just a header to an editable area
and not a button.
Bug: T291284
Change-Id: I683cca2e7d6549e652bd03ae1e46f4eff8c07d0a
This is a more radical change, compared to the previous patch.
I will post more detailled explanations as comments on Gerrit.
Change-Id: I6909b3f0b2c153b7ee9995441e995ffa793eab40
This is done for a lot of the elements in this class. They are trivial
jQuery elements instead of OOUI widgets. While we usually want to use
OOUI widgets, this is different in this case. Think of a template with
1000 parameters.
Bug: T291284
Change-Id: Ie1960ee706dca17aa4963c23a2e89c1cfff106f9
The event "focusTemplateParameterById" targets the right side of the
dialog. The input field for the parameter should be focussed. This
doesn't make any sense when the parameter was just removed (i.e.
unselected).
Change-Id: Ie75b1edaebe9d0444b98e66cb56a5c7774393bea
Preserve the place of annotation meta tags; adds information for the
users about annotation and, if necessary, annotation range extension.
The messages and individual handling of annotations for the annotation
range can be defined by the extensions: see I0b58a418 for an example
of how that can look like.
The structure of this patch closely follows the one from I104e7abbd
(handling of <noinclude> et al.).
Bug: T261181
Change-Id: I39029e4a63d22b37107edec066006557bcff34bf
It should be possible for extensions/skins to trigger the click event
It should be possible to do $('#ca-edit').trigger('click') so that
Vector's sticky header can trigger the VisualEditor.
Bug: T293159
Change-Id: I58625ffca982edfbc4cdcb14a666d79093e1b89d
Removing the selected item causes StackLayout to select (and scroll
to) its first item. To prevent this, we preemptively unselect.
Note that even when an unselected item is removed, StackLayout still
clears the selection, so this patch doesn't lose any useful
behaviors.
Fix should be pushed down into OOUI, unless there's a use case where
we want to select the first item?
Bug: T293635
Change-Id: I0c1fddfa32b76621a9f1328c8173f0158386aee8
The signature of createInvisibleIcon was changed but this
was never updated.
This fixes invisible template renderings inside previews, e.g.
inside the reference context item for:
<ref>{{InvisibleTemplate}} Content</ref>
Change-Id: I3d1b7a177408032957ac3fa8ead813438aa6bda7
Load errors are already handled in the MobileFrontend part of the
mobile visual editor, by this code:
66c55573e5/src/mobile.init/editor.js (L375-L387)
// Wait for the data to load before we show the editor overlay
overlay.getLoadingPromise().then( function () {
...
}, function ( error, apiResponse ) {
// Could not load the editor.
(1) overlayManager.router.back();
if ( error.show ) {
// Probably a blockMessageDrawer returned because the user is blocked.
document.body.appendChild( error.$el[ 0 ] );
error.show();
} else if ( apiResponse ) {
(2) mw.notify( editorOptions.api.getErrorMessage( apiResponse ) );
} else {
mw.notify( mw.msg( 'mobile-frontend-editor-error-loading' ) );
}
} );
Compared to our code:
ve.init.mw.MobileArticleTarget.prototype.loadFail = function ( code, errorDetails ) {
...
(1) this.overlay.onExitClick( $.Event() );
(2) mw.notify( this.extractErrorMessages( errorDetails ) );
};
The lines marked with (1) and (2) do basically the same thing. And
the function parameters "error, apiResponse" and "code, errorDetails"
are actually the same objects, just with confusingly different names.
This causes the popup with error message to appears twice (although it
isn't too obvious, since the two popups appear in the same place, so
only one is visible), and also causes bogus data to be sent in event
logging (T237063).
Bug: T237063
Change-Id: I7fe7a944707fe585251ce9e16bbb78ccd123a7ed
When I type e.g. "subst:example" as the template name, we made this
work as the user would expect: the template named "Example" is found
and it's TemplateData documentation used. But the dialog title shows
"Subst:example". Note the uppercase "S". It means this string is
parsed as a title, including the "subst:". This is confusing. Just
show the template name.
Change-Id: I9817786991a8379cf48b0a664aef1413abddee2d
Some cleanup to improve readability and reduce the amount of code.
Relevant bits:
* One method name was wrong. It can actually return parameter ids,
not only top-level part ids.
* I got rid of some fail-safe checks that are never needed or moved
them to a more central place.
Change-Id: I08f2ad7bc7d3f985d6189dff170dda554f3d37c2
This patch fixes two issues:
* The bottom corner of the new sidebar was never correct because of
a `padding: 2px` that was introduced later, but never compensated
for.
* The moment the toolbar is shown it's not a single-template dialog
any more. This implies minor style changes.
Bug: T290262
Bug: T292727
Change-Id: I08da73880c469085994ee4beb3fcdd973f80ae11
The idea of this piece of code is to make sure both sides of the
dialog show the same element. But it doesn't make sense to force the
*header* of a template into view when I clicked on a *parameter*.
Bug: T292718
Change-Id: I9945f8e54c856152f05bf717e43468ab5ab24d2f
I run into this in some local test. There are two reasons this code
can be reached:
* When a wiki doesn't have the TemplateData extension, the
additional API call from line #154 will fail. But the original
search query succeeded. We have the `originalResponse` and can
return it. This makes the code behave as if the additional
TemplateData API call was never done.
* But what if the original search query failed? We still end in
line #183 – as we should. But this time it can't return anything
but undefined. This will be considered a valid, successful API
response. But it isn't.
There might be a better way to clean up this chain of promises.
This is the smallest fix I found.
Change-Id: I02d3d053156da222ee424382007621f314777015
Instead of using an object mapping namespace ids to if they have
subpages enabled or not, pass an array of the namespaces where
subpages are enabled, reducing the size of the configuration that
gets loaded on all requests. Only requires a minor update to the
JavaScript that uses the value (check for array index instead of
object value).
Bug: T291729
Change-Id: Ia0ecac71721eceed52cc90f39ecc560bdf1b7f9b
I moved some code around and found that quite a lot of code wants to
know:
* Is the length of this transclusion exactly 1?
* I need that 1st part.
There is more that can potentially moved from the dialog to the model.
But I don't want to make this patch to big.
Bug: T292371
Change-Id: Ia94ed0450d04dd97c4c41f5bf7c266f9a534e821
This includes some moving of code. These helper functions seem to make
more sense in the TemplateDialog class.
Bug: T292371
Change-Id: I004405bab60a569b084f9083fefa41f44f9a5561
I hope this code is a little cleaner. This patch doesn't change how
the dialog behaves.
Bug: T292210
Change-Id: I237812b3404437948eb76d8b36dcca2a4c688d6d
This method does not only select a "part", i.e. a top-level item like
a template. It also selects sub-items like template parameters. The
new name reflects this better.
Change-Id: I51a8ddbd05b283248afba5a623cc52da7b2434f5
The TemplateData extension is not limited to the Template: namespace.
And even if pages outside of the Template: namespace typically don't
have TemplateData information, the API is still able to automatically
extract parameter information from every page.
Or:
It's rare that a page outside of the Template: namespace is used as
a template. But if it is, this is not a mistake. The code here in
VisualEditor should not try to be "more clever" than the user is. If
this is what the user want's to do, let's not block them.
Bug: T291883
Change-Id: Iaf3fd5530b74fab7cedfc85ce04c8c40632df11f
The feature set is (almost) fully covered by other tests, notably
the tests for the …OutlinePartWidget base class and the other two
subclasses.
The only bit that's not covered any more is the
"visualeditor-dialog-transclusion-wikitext" message. But that's
super minor and not worth a separate QUnit test.
Bug: T291157
Change-Id: I574f9cff0baf3dff885094769c124a9e05a1d1c8
The code that uses it is commented out
Bug: T291729
Follow-up: I7af2bc91524e832555b66f090a671672cd14f294
Change-Id: I4cceb9ca83a2274fa93783af3608b9486b773522
It's not only used as an event handler, but called as an ordinary
method as well. Let the name reflect this better.
Change-Id: Ie5a0d9c4cd072063a164886f18d0859327b3f267
Note this patch is somewhat incomplete. The feature fully works and
I would like to see this patch merged as it is. But whenever you
press one of the keys the focus is stolen by some element on the
right side of the dialog. This makes it impossible to e.g. press
Ctrl+Shift+Down multiple times. The idea is to work on this in the
next patch.
Bug: T290262
Change-Id: Ic67f2a696c94f1e5c71134d681161221aecbfdf6
Reasserts scroll and highlighting when toggling the sidebar, in the
case that the other panel is hidden (narrow-view mode).
FIXME: Doesn't reassert focus because the page.focus() and
bookletLayout.focus() methods don't seem to work, maybe the bug is
especially prominent when the item to focus was already marked
active.
FIXME: Stopped working for right-to-left sync on wikitext elements.
This is a less common use case and can be addressed in follow-up.
Bug: T290975
Change-Id: I94f5709e810c63ee5fd7729a192ac7b92686b88f
… obviously only to methods that are meant to be private, i.e.
only called from within the class (and possibly tests).
Change-Id: I581558078dc7210abac5f5724f71316ac45745e6
The .onUpdateOutlineControlButtons() method doesn't describe what it
actually does. This issue was introduced in I9c5478a. (Intentionally,
to not make the patch to complicated.) Let's continue to rename
things to be a) unique and b) honest about what they do.
This is an alternative to I8d98e61.
Bug: T289043
Change-Id: I4d52ffa6e9e5df2025a0c33031c1517bcb421279
I can't really tell what insight we get from the word "container".
Every widget is a "container" in some sense, isn't it?
This widget is just _the_ outline, I would argue.
Other suggestions?
Change-Id: I1fb27ee58c1a3dd790022504e978198dadf7ea02
This prevents multiple highlighting, which was possible to achieve by clicking
sequentially in the input fields of two parameters from different templates.
Change-Id: I404936f1569ab544b693a9bc6921381636ea8f40
This is bad for multi-template transclusions, where we focus the
first parameter of each template ending with the last. It's also
inconsistent, we don't do the same for wikitext chunks.
Change-Id: I720ce1a380a6f4a8618c3608b63557df5fb50393
This was damaging the UX by causing the first parameter to be marked
as selected, but without reliably focusing it. For example, loading
a wikitext-template-wikitext multi-part transclusion would cause the
initial focus be given to the documentation link in the template
content header. After this patch, the focus will be at the top of
the page and tab will run down window functions and then through the
sidebar.
Change-Id: I84131870ae3887dcae74d91d68c5984d1dbffd85
Most block-level things that can be interacted with by clicking have a
highlight. Categories don't, and that makes it harder to discover that
you can edit them.
Change-Id: I6be3824c34b36bd09bbae8cab9a9f36b6bcdb767
The weird auto-scroll feature is described in T289043#7297679.
This also fixes T291381 different than I393a2b1. Only one of the
patches should be merged.
Bug: T289043
Bug: T291381
Change-Id: I70d87f12fd68001e880510fb6c38d7c419d64b15
AddPart in the resetDialog also triggers replace part
so this call could be removed there.
Bug: T291365
Change-Id: Id6c0f5bf3aaece45da37ffab75a4d99c113944f6
This is mostly re-arranging existing code. Actual changes made:
* Remove the message that claims a template can't exist. We can't
really know this.
* Instead show the message about "modifiers" in cases where curly
braces and other wikitext syntax is involved.
Bug: T290140
Change-Id: I713d7f54cad2510f9a02c113600980cba8c3e58b
The titles in the link cache do not include subst: anymore so to see
if these pages exist we need to use the same link title used in the
query.
Bug: T290140
Change-Id: I18de81e0bf46212c2199a948f7ca89182aa19eff
This code was introduced in I8fafee6. I can't tell any more what
the "bug" mentioned in the commit message was. Let's get rid of the
duplicate code path, see if we run into regressions and deal with
them one by one. That's much easier to handle than keeping this
confusing code path around.
Note this "focusin" event handler was actually re-implementing
parts of the upstream BookletLayout, namely
OO.ui.BookletLayout.onStackLayoutFocus().
Bug: T289043
Bug: T291381
Change-Id: Ib386ae6efec08465122f0e8ee81cd6dc9a2d337a
I was (again) wondering why the try-catch is there. But it's actually
needed. Now covered by a test.
Bug: T290140
Bug: T291062
Change-Id: Iccc7274ed9e7b81b8491dbca7d3d771706b0ed09
Note there is still an issue with the upstream
OO.ui.BookletLayout.selectFirstSelectablePage() method stealing
the focus in some situations when you press space. Still this patch
already improves the situation. Pressing space on both top-level
template elements as well as parameters should scroll the thing into
view, but keep the focus in the sidebar. This was just not happening
at all.
Make sure to use a very long multi-part template to test this.
Bug: T289043
Change-Id: I9c5478a04b14b94ccd5d00480d48a7d59b4e0c37
