It would tell you you were logged out when you were actually
logged in, and when I looked into it, I found lots of broken
things, including lots of confusion between the current
anon-ness and username and the new anon-ness and username.
ve.init.mw.Target:
* Check the new isAnon value, not the old one
* Pass the username to the event, rather than just anon-ness
ve.init.mw.ViewPageTarget:
* Use the passed username (new username) rather than the
username from mw.config (which is updated, but confusing)
Change-Id: Icf406d49100d81e87c677fd6b57ff93cc29f601f
Move ve.track() subscriber to its own file, and have it
route mwtiming.* events (for TimingData) and mwedit.* events
(for Edit schema) differently. Most of the data population
lives in the subscriber, so actual ve.track() calls are
pretty lightweight.
Existing ve.track() calls with timing data were kept with
their names intact for backwards compatibility, but
we may eventually want to throw them out and start from scratch.
ve.init.mw.ViewPageTarget.init.js:
* Remove old track subscriber
* Track init and ready events
* Remove old ve.track( 'Edit', ... ) crap that didn't work
ve.init.mw.ViewPageTarget.js:
* Fire the saveWorkflowBegin event before the save dialog
loads rather than after
* Remove unnecessary this.events.trackSaveError() calls:
TargetEvents already listens to these events itself
* Remove badtoken handler because all it was was an
unnecessary trackSaveError() call
* Add abort tracking
** Pass trackMechanism through deactivate() and cancel()
ve.init.mw.Target.js:
* Add static.integrationType to populate the 'integration'
field in the schema
ve.init.mw.TargetEvents.js:
* Simplify onSaveError* methods away into connect bindings
* Map track topics to mwtiming.* so they can be routed separately
* Track save-related mwedit.* events
Depends on I978eda96c in WikimediaEvents
Change-Id: Iae677d9b15c71d2b18e795bd5179d11876c06abd
Make sure it always gets torn down on deactivate, not
just on save. Otherwise we end up with multiple copies of it.
Change-Id: I7b95c316641fc48ce7087a0042ec6174fe03180b
If you clicked "Read" while the editor was loading
(but only while the "Edit" tab was already active, not before)
then you could get in a situation where surfaceReady fired
on an already-aborted target, which caused JS errors.
It seems like we should clean more things up in this
case, but I don't know what they are. In any case,
we should not try to set things up on a non-activating
target when surfaceReady fires.
Change-Id: Id57bd63ff288156725e472e7d89009022090253a
Follows-up Ica33de675, If505a46f54.
* The setting of 'uri' looked like a redundant local alias before
passing on to pushState, but is actually important on itself.
* Remove binding for hideLoading. It's a detachable method on
a singleton, not an instance method.
Change-Id: Ic3536caf3f42ee893124312fd5981b67336bd480
When you clicked the Back button in the browser, the URL
in the address bar would change (removing veaction=edit),
but we would not go back to read mode. This was broken
by 5c0c11753 almost a month ago but apparently no one noticed.
This is because 5c0c11753 moved the pushState() calls to
be earlier (in init init), making the replaceState() call
in the ViewPageTarget constructor (which is there
specifically for this bug) run too late in those cases.
The simplest way to fix this is to duplicate these replaceState()
calls before the pushState() calls in init init.
I feel a bit bad about copying code, but not very bad
because the code I'm copying already has a FIXME comment
about how there should be a better way :P
Change-Id: I6627a5d1d9377ae815bc58bceeb059ce9f4f19ab
Just like DOM interfaces such as document and location. And JS
constructors like Object.prototype, and libs like jQuery.
No need for the window host object.
Change-Id: Ie39aaea2ca17bdec5fb3afe32a4e6c9f751bd0c6
The location object is a global, just like document.
Using it via 'window' needlessly adds complexity and, for example,
makes it harder to catch typos in static analysis.
Standardise on location.href in place of the many different
variants for accessing and assinging the full url:
location =
location.href =
location.assign() =
And each with 'window', 'document' and without host object.
Change-Id: If88515bd88fc5b93ebacd4ec41fce02fec540f18
mw.msg can return things with <br />, which we want to be interpreted as HTML
rather than just escaped as text.
Bug: 73571
Change-Id: I7861432d9361e01f9def0578c342e60715c3d764
ApiEditPage can give us 'nochange' instead of the
'oldrevid'/'newrevid'/'newtimestamp' keys if we gave it a null edit.
Bug: 73463
Change-Id: Ic22597dfed11de3823471673404090a9bce12928
After 5c0c117, clicking the VE edit tab on /wiki/Foo?oldid=123
sent you to /wiki/Foo?veaction=edit , dropping the oldid parameter
and editing the current version rather than the old version.
Fix this by only recomputing veEditUri from scratch when necessary,
and reusing the current URI when possible.
Change-Id: Iee9a745990f1a2bad40f46b8cdaaa727bb7fead8
We were attaching its removal to the wrong promise in 2 of the 3
places where it was being called.
Also this file is horrible and should be refactored. A lot.
Change-Id: If74b1629266f22e2d110305b139bef4a8e69b13b
The container is zero-height and zero-width, so jQuery doesn't
consider it :visible, and yet it still takes up visual space.
Bug: 72693
Change-Id: I3bed5394a2a64a9f7f0a331f850aa412b5b11b7d
Moved the spinner code from ViewPageTarget to ViewPageTarget.init to make it appear immediately on clicking edit.
Bonus: also fixes the URL to add the parameter vesection when clicking a section edit link.
Bug: 65453
Change-Id: Ica33de675203cc0f0594b8362731c4e98a644313
Just hide them when opening the editor and show again afterwards. Will
need Parsoid for proper support.
Corresponding patch in core: I2389ff9a5332a2b1d033eb75f0946e5241cfaaf4.
Bug: 23796
Change-Id: I3ce5e7869be50dcd189ca24e2b3d7ebc62de4fc4
New changes:
8d5ec7a [BREAKING CHANGE] Rename ve.Document.getNodeFromOffset to getBranchNodeFromOffset
Local changes:
* Update calls for rename of getNodeFromOffset to getBranchNodeFromOffset
Change-Id: Ibc69f5a5deeed5698368bb19b30f14497c579e90
Instead of doing a blocking overlay, we're simply keeping the dialog open,
which is necessary for the pending status of the action buttons anyway.
Requires Ib2c8f336 in OOUI
Bug: 65012
Change-Id: I65b5de4a1666a81b157a71f6fec490007689eb44
That function needs to return the result immediately, not wait for module loading (via mw.notify).
This was breaking us being able to keep track of what wikitextWarning object was in use (but only
the first time we used the module), and therefore fail to close the warning when the wikitext
disappeared.
Bug: 70168
Change-Id: I0f1427423a5fe82ec8e70e2f0462a3044ca7ace8
IE doesn't accept null as a "do nothing" value, only undefined.
If you return null, it'll show a popup with the text "null".
Change-Id: I984a7ded483c4c178cbca2a9af9abd895e6ded56
Extract the part of mw.Target#restoreEditSection responsible for moving
cursor to a separate method and move the cursor only on desktop.
Bug: 68832
Change-Id: I4ffc54ced64ce9e52d0cbcffb2fb4d082239098c
If there is more than one span in #firstHeading, we only want to
update the first one.
This will still break if something inserts elements *before* the title
span, but fixing that would take more thought (we probably should
rebuild the entire heading element and fire 'wikipage.content' on it).
Bug: 69857
Change-Id: Id78b9b8275a57c9b3f3f1dbd0aaca356f94d0f03
The class provided a minimal coupling to the firsteditve guided tour,
which used it to attach a guider to the "Save page" button.
The class was removed in I30dc7020121f0dd6907b61ef674a7cb14eb00652.
Bug: 69784
Change-Id: I81fdc4f2fa41c86a6481cf478c154b5d6c99d41d
Trevor promised to do this in Iafe64a6f but never did.
This needs styling changes to look right. It also means that
VE mobile standalone doesn't have a context at all right now,
which is horrible, but at least this makes MW mostly work.
Bug: 68546
Change-Id: Id8cc4b07905f777f667f36cbcc65e821847142d5
The window refactor removed the 'teardown' event from windows,
but ViewPageTarget was still listening to this event on the save dialog.
Instead, use the opening promise to be notified when the save dialog
closes and call onSaveDialogClose() at that time.
Change-Id: I31a9a359eb14a56b214a1240db08632bda6bc8b9
Because this breaks other subtitles such as subpage breadcrumbs
Instead, deal with the #redirectsub (added in I780c965) directly.
Bug: 68432
Change-Id: I646868916a4480404f6d466fd89f84798d0e9df5
When I05f11246ca90a1ce3f741fd93194a827528cd597 gets merged, we will need
this to be able to scroll to a section on iOS (where the content will be
scrolled within a div, not as a whole page).
Change-Id: I6e47edfa8c3a3a46fd7a4f11e4a54955f3694b9b
It's unnecessary, big and ugly, way too close to an actually useful button, and
adds oodles of complexity to the mire that is VPT without significant user benefit
whilst taking up an unjustifiably huge amount of the already-over-burdened space.
This means that the minimum browser width for English on default Vector to show
the toolbar correctly is now 945px, down from 1029px.
Bonuses: fix MWCancelConfirmDialog's cancel button to be destructive (it is) and
remove a now-recently-fixed comment asking for the save button to be styled using
a generic class (provided by the constructive flag).
Change-Id: I30dc7020121f0dd6907b61ef674a7cb14eb00652
Closing a dialog with specific data means closing it again with
potentially different data, while the dialog is already closing, means
someone wins and someone looses. Silently failing in this case is bad,
because if the first close call was a cancel, producing no side effects,
but the second close call would have produced some side effect, the side
effect would never occur.
The problem here really was that the save dialog needs to be closed
before we can destroy the surface so we can uphold the assumption that
hold and teardown processes are operating on an attached DOM.
The solution is to automatically close the save dialog on teardown,
rather than on save. Since save triggers teardown, this has and identical
user experience.
Bug: 68048
Change-Id: I669448739f168737d4eddd6496189a819ce894b1
Otherwise you get "Uncaught TypeError: Cannot read property 'messages' of null"
if you press the save button late enough in the saving process. The bug refers
to a different error which I have not been able to reproduce.
Bug: 68073
Change-Id: Ia8fa325f1450329b6e0e4ee9af5302aa4857d637
Confirm dialog was replaced in refactor, so until this is merged the 'Cancel'
button is broken.
Bug: 68068
Change-Id: I77d1c82bf0d68013eef361174a134860a197cd44
New changes:
56de6f5 Localisation updates from https://translatewiki.net.
f8bda64 Widgetise demo menu
6ac48d8 Localisation updates from https://translatewiki.net.
365e131 builderloader: Omit value for boolean "disabled" attribute per HTML5
706e4b3 Prevent double counting of DM nodes in getNodeAndOffset
b141a7d Update OOjs UI to v0.1.0-pre (d2451ac748)
c5b3921 Localisation updates from https://translatewiki.net.
1606983 Update reference to ConfirmationDialog to use MessageDialog
Deletions:
* Styles for ve.ui.MWBetaWelcomeDialog - not needed anymore because
OO.ui.MessageDialog provides them
* Styles for ve.ui.MWGalleryInspector - not needed anymore because
ve.ui.MWExtensionInspector provides part of them and the rest are being
replaced by programatic sizing
Modifications:
* ve.ui.MWLinkTargetInputWidget - Added support for validation and href
getter
* Split message between tool and dialog title for ve.ui.MWEditModeTool
and ve.ui.MWWikitextSwitchConfirmDialog
General changes:
* Updated inheritance.
* Added manager param to constructors of dialogs and inspectors.
* Updated use of show/hide with toggle.
* Added meaningful descriptions of dialog and inspector classes.
* Configured dialog and inspector sizes statically.
* Configured dialog action buttons statically.
* Interfaced with OO.ui.ActionSet to control action buttons.
* Moved applyChanges code into getActionProcess methods.
* Always using .next in setup/ready process getters and .first in
hold/teardown process getters.
Change-Id: Ia74732e6e32c0808eee021f0a26225b9e6c3f971
Mobile doesn't want the tool+dialog functionality for those yet,
so move them to a separate module and only load the bare bones
for mobile. We did the same with mwimage/mwimage.core.
Change-Id: I9185ce62f458b3de08cbd28f2a41370d2301de9d
This reverts commit b7401f838b.
Didn't break everything, but we should probably avoid this getting deployed until I can work out wtf is going wrong with it.
Change-Id: I048143239e998b30aba79fa395a0af1cb06c6a9b
This reverts commit 5565ccca54.
I have no idea what is going wrong on deployment-prep to cause
the error in bug 66792. Let's try to find out.
Bug: 50341
Change-Id: I5041de838128bb55c57baddae01cdcb263626537
Causing HTTP 500 errors in ApiVisualEditorEdit.php (calling
getDisplayTitle() on a non-object).
This reverts commit dedc89b5ff.
Bug: 66792
Change-Id: Iaf438660f0623dc05f76294ad847b2fc5e25bed6
Depends on I468d4eb4 in core.
Uses various hacks to trick the test runner into thinking
an MW target is in use, when in fact we still use SA targets.
Change-Id: If4611307d5d7aaee4af84f86ef82faf9078043b6
Use new setupToolbar and setupDebugbar methods in base target.
New changes:
7ff523d Localisation updates from https://translatewiki.net.
3815224 [BREAKING CHANGE] Debug bar refactor
155f4ab Edit HTML mode in demo
Change-Id: I554ce51eae872ab0f741a913bf10394c2a8c3e52
* Update size of save dialog earlier on, and swap back to save panel in
save dialog on setup instead of ready to avoid scaling and sizing
simultaneously
* Update use of closing/closed/opening/open events to use
setup/ready/teardown events instead
New changes:
43a48cb [BREAKING CHANGE] Update OOjs UI to v0.1.0-pre (9f4f250f88) for window process cleanup
Bug: 65705
Bug: 65343
Bug: 60843
Change-Id: Idf6f85ae12f6ca80fde57a400cb5b11270938c1a
Remove ProtectedNode mixins for new FocusableNode.
New changes:
e1b0e33 [BREAKING CHANGE] Merge ProtectedNode into FocusableNode
Change-Id: Ie515704163c24317739fd34d35094b9ada6bfa66
Replace instances of target.$document, which was removed
in VE core.
New changes:
8083623 [BREAKING CHANGE] Remove $document cache from target
9256158 Cleanup target properties
cc0d71f Multi-surface fixes
ba8872e Localisation updates from https://translatewiki.net.
Change-Id: Ibff83cae770c056ed64bcf438ed74b44d929cdc0
Switch to processes for windows (dialogs/inspectors)
This conversion also required the splitting of MWLinkInspector into
MWLinkNodeInspector and MWLinkAnnotationInspector.
New changes:
88fe25f [BREAKING CHANGE] Update OOjs UI to v0.1.0-pre (dd888aba5c)
Change-Id: I662d8985463c9fc881775f70aef87ebeb454a73f
It now only sends a single 'done' event, which we can use .once on
Relies on I4f485d4f in OOjs UI.
New changes:
418cd67 Update OOjs UI to v0.1.0-pre (0f101c6f5d)
Bug: 65571
Change-Id: I19aa65612bf02bed056de292f212d2f5732a8fec
No need to set in mw.Target as it now exists in core Target.
Add config param to MobileViewTarget override.
Depends on I555935d2 in core.
Change-Id: I72be9098bd9d59272ca3d7a9a64dca4271ef3ee5
Instead of overwriting everything else on the page (e.g. 'Pages in category ...')
See also bug 65349 / Ib6c49286 for file pages with a similar issue
Bug: 64239
Change-Id: I59ff9de5d0463f0f1ae8a18d54ebea5844fb1af5
Check that the user is anonymous before looking at their cookie to decide whether
to show beta warning dialog.
With the existing code, we would see that the preference is false and then check
that they have no cookie. But being logged in should make the cookie existence
be disregarded.
Fixes Ica9e5a92
Bug: 65821
Change-Id: I84e31323930c404222388bb74e4b4ca8d303e05c
We weren't unbinding these handlers at all, and so the 'ok' or 'cancel'
handlers could run multiple times for one button click, and even worse,
you could get in a situation where clicking 'ok' in one confirm dialog
would also run the 'ok' handler for the other one. This happens because
the ConfirmDialog instance is recycled by the WindowSet.
The way the unbinding is done is ugly; we should either consolidate the
'ok' and 'cancel' events so we can use .once(), or come up with some other
way to automatically unbind the handlers.
Bug: 65557
Change-Id: Iabf0c0d0229add09cc775358fc5a4e5ae783db04
"Yes, switch" isn't constructive; make it primary instead.
"No, cancel" isn't destructive; make it neutral (no flags) instead.
Change-Id: I841cbed4a81eaed679a8c7da89942c6b030a1217
"Discard edits" isn't constructive, and "Continue editing" isn't destructive.
Instead, mark "Discard edits" as destructive, and make the continue
button neutral (no flags).
Change-Id: I7648555ad47be698e75b5019d7738b0afb8611aa
Per TTO on bug 51655, the implementation of confirm() in most browsers is crappy and we
shouldn't use it.
Change-Id: I755085a253c05958e4b50af57b19dab90f2f0fb6
Follows-up e3be4a6. Object properties default to undefined, no
need to check existance first. Looks like like an "isset()" in
PHP for preventing E_NOTICE.
Change-Id: I594b23e6caf1e17d6d5d37e6a5fd81152e78b3a6
jshint:
* Update to grunt-contrib-jshint v0.10.0 (jshint v2.5.0).
* Remove coding style options covered by jscs.
* Enable new option "freeze" (prohibits changing native prototypes).
http://www.jshint.com/blog/new-in-jshint-oct-2013/#option-freeze
* Re-order to match http://www.jshint.com/docs/options/
jscs:
* Update to grunt-jscs-checker v0.4.4 (jscs v1.4.5).
* Format .jscsrc file in a more spacious way and order the
properties less arbitrarily (using the jscs's readme order).
* Enforce more details of our coding style
* Get rid of the unsable "sticky" operator rules which have been
deprecated in favour of using other rules instead that are able
to enforce this more accurately.
- disallowLeftStickedOperators: Remove deprecated rule.
* Ternary covered by requireSpacesInConditionalExpression.
* Rest covered by requireSpace{Before,After}BinaryOperators.
- requireLeftStickedOperators: Remove deprecated rule.
* Comma covered by disallowSpaceBeforeBinaryOperators.
- requireRightStickedOperators: Remove deprecated rule.
* Logical not (!) covered by disallowSpaceAfterPrefixUnaryOperators.
See also If46b94ce1, Ib731f11b1 and I0b0cadbc5 in oojs/core.
Also:
* Update grunt-contrib-watch to latest upstream version.
Change log at https://github.com/gruntjs/grunt-contrib-watch/blob/v0.6.1/CHANGELOG#L1-L17
Change-Id: I6c5a34afea8b05a3dca617897c192594df06ca90
Relies on:
* I292fb34d in OOjs UI to add the confirmation dialog
** I67329820 in MediaWiki core to use the messages added in OOjs UI
** I38f5bb63 in VisualEditor core to register the confirmation dialog
Bug: 50955
Change-Id: I98f9a03d780556b360b57c018c05a27cc1b3862e
These changes are to accomodate the design for the mobile/tablet
version of VisualEditor which uses an icon rather than a label
for the drop-down button.
Change-Id: I1086ed4a84ae4061fcc79cc7f587657232c5d5df
Three 'minor' points:
* You have to declare even hidden preferences. Whoops.
* There's no such thing as an "optionsToken", use "editToken".
* You need to POST action=options API calls.
Ahem.
Change-Id: I9c4358107af7bcfca157bd014de49882914e990c
For logged-in users, we can a preference instead of a cookie. This way it is
also preserved between browsers and when cookies are cleared.
Keep using cookies for logged-out users, except if the beta welcome dialog
has been suppressed using the one-off GET parameter 'vehidebetadialog'.
Bug: 55551
Change-Id: Ica9e5a92841fec003ce4a21d740a9bc6ff3da9c7
We don't have a FOUC on the appearing of the 'edit' link. That
one is handled quite intelligently:
* Via the stylesheet that is also loaded in noscript mode, its
(hidden) appearance is already predetermined. So as soon as
those elements are seen by the browser they style correctly
for users without JavaScript (display: none).
* This same stylesheet also hides it for users with JavaScript
but where VE is not available (e.g. due to browser support).
While ve-not-available is added very early on (before
document ready), it could in theory cause a short FOUC, but
that's okay. We simply don't know that VE isn't supported
until then. We optimise for the common case (JavaScript
enabled, VE available), while still ensuring that it is
always hidden in noscript, and is hidden as soon as possible
when VE turns out not to be available.
For some reason, one small detail (the little bit of whitespace
added inside the brackets), was left out of this and was
implemented by adding the class 'mw-editsection-expanded' to them
from a document ready handler.
* First step, get rid of the script that adds this class and
use ve-available instead. That means they're styled
correctly much earlier (we add the class to <html> before
document ready). This can still cause a brief FOUC, though
in most cases they're correct from the start.
* Step two, make brackets expand by default for script users,
and let ve-not-available reset it. This way, like with edit tabs,
a FOUC will never happen for ve-available. And even for
ve-not-available, a FOUC is rare since we add it before
document ready via <html> look-ahead styling.
There was still a brief reflow jump because of negative margins
between two paint events. One was undoing the other at a later
time. These negative margins are a remnant of when we were doing
animations (follows-up I4b9c47fd65a70). They were added to reduce
reflows and content shift, but were now actually causing them.
Removed "padding-right" from mw-editsection, and negative margin
from the brackets.
Also:
* Don't add inline 'style="direction: ltr;"' on every single
editsection throughout the DOM. This was the only operation we
were doing unconditionally. While I doubt the need of it in
general, we can at least allow MediaWiki to do it right, and
only add the override if needed. This saves quite a few DOM
operations.
Change-Id: I7a729edc2cd4a66ebc0ad6935ffd02cb9b948bff
There was a slideDown() call, but this didn't do anything since
toolbars are visible and in the DOM by default.
As a temporary hack, hide it synchronously after creation and
then do the slideDown still.
This could ever so briefly cause a flash, though that didn't
happen in my testing.
This makes the experience smoother when we initialise the surface.
In particular the moment where we swap #bodyContent for our Surface
(which should look visually almost identical), before this change
it was still a bit of a flash since the Surface version has a
toolbar on top, and thus instead of swapping smoothly, we hide
content and show a similar piece of content that has an incompatible
offset from the top.
Bug: 64751
Change-Id: Id94974ba71fd887ce494d7b2b16ec62d43b18575
Don't unselect article tab when loading VE, do unselect when restoring normal view mode.
Bug: 49407
Change-Id: I4b6e5c898a8af2b404151bba46359dc4bfbd739e
MathCaptcha just extends SimpleCaptcha, so its output is fine to show as
text. Doing that because I'm not sure how to render TeX and this is a
reasonable fallback
Also tidy up the order of some message entries in my last commit.
Bug: 64328
Change-Id: I98312f61471667e7c4dcf715295f85642c31a688
Unfortunately the best way I've come up with to do this so far is
checking the namespace.
Bug: 53477
Change-Id: Ib2dbe91aff516f2d2408e07ff3f73ea861bfcbe2
Use new dm.Surface method for checking undo history state
(hasPastState -> hasBeenModified).
New changes:
38776df [BREAKING CHANGE] Refactor history state methods to better suit uses
3412b41 Localisation updates from https://translatewiki.net.
0c5238c Add system to dm.Surface for staging changes
8f0077c Only hide popups on selection change
4575f82 Fix initial selection when focusing in Firefox
debfd4e Document focus/blur cleanup
Change-Id: Ic66c96a4f64ad82a01a84535ca8cd19332065b37
Previous hack caused unwanted blur events and subsequent range changes.
Depends on I8388318311 in core.
Change-Id: I9163f4d9928887a5eec09f0651ec0a66cc221cd4
These were being used indirectly in the MW*Model's. Use surface
fragments instead.
Fixes I0fae3e5ff2bd.
Change-Id: I1d6aa5e00a9315cf7088f87f9e9d828833feec64
Also, we warn the user that Here Be Dragons™ when they're editing a Page
Translation /source/ page.
Bug: 50284
Change-Id: I841ccb8461d31358640a16301a6a78750a660d36
TOC Widget is created in the mw target view class.
Adding and removing a heading rebuilds the TOC Widget based
on the the order of the page heading nodes.
TOC Widget considers TOC page settings and displays in the default manor
unless forced or disabled.
TOC Widget still needs to be finalized by being placed in the surface.
This could be a problem until we have a CE node for it to live in or
have some DM work added. Roan and I have discussed how to go forward.
To enable the widget you must add the following to LocalSettings.php:
$wgVisualEditorEnableTocWidget = true;
Change-Id: I488cfbbdb060e50d81f51e0f757e67d0114b8936
New changes:
dd15f23 Split ve.ui.Surface into DesktopSurface and MobileSurface
16283f4 Add OOjs UI's sco.json i18n file
ef94038 Split ve.ui.Context into DesktopContext and MobileContext
Minor adjustments to point to desktop and mobile Surface or Context.
Change-Id: I7cf6f99a5a1216a28a7146afcd4deb68c7eac38e
Store a bit of data with the states we push or replace in the
history so that when the user navigates back to them, we know
for sure this is a state we pushed in the history.
This allows us to filter out popstate events triggered by the
user browsing to states create by other software, as well as
states triggered by the browser that have no state data at all
(Chrome is known to, in contrast with other browsers, trigger a
blank popstate event on load, which we were mistaking for a user
event where the user navigates back to veaction=edit).
Bug: 57901
Change-Id: I142777d0d2ae96d3afee224782f0d2d1522da1eb
The switch to source mode code path was causing onSerializeComplete to
be called, which accesses this.saveDialog because it assumes it's being
called from onSaveDialogReview.
In fact, onSaveDialogReview was calling it twice, once as the callback
it passes to serialize() and once in response to the serializeComplete
event. Cleaned this up by renaming the function and removing the
event binding, so it's now only called once and only for reviewing
changes to new pages, not in the switch to source mode code path.
Bug: 62544
Change-Id: I86eea57806a20408c8dc89a234c39cae1d969bca
The experience should be consistent between mobile and desktop.
We should explore re-styling these buttons to look like
Ib3c94d19231b018a509b78269001223ad0568795 in desktop as well
at a later date.
Change-Id: Ic9e4c5d12c3c75fcb195432c9155ec0a7eecac04
Split tracking out of the base target and from viewPageTarget
Primary reasons for this change:
* Makes it possible to resolve an issue with tracking in mobile
* Lets us reuse the viewPage save workflow tracking
* Support existing and new targets with tracking
* Simplification of target classes
Change-Id: I036e4f2129d929db0a3b9a4baa87c946a4b194a9
Core retains core functionality, including text styling and architectural
items like dialogs.
The new modules are:
* mwformatting
* mwimage
* mwlink
* mwmeta
* mwreference
* mwtransclusion
The new modules are loaded in ViewPageTarget (for desktop), except for
mwlinks which is included from MWTarget (for desktop and mobile), per the
needs of the Mobile team.
Also, mwgallery was moved to desktop-only loading status.
Some styles which were loaded in mwcore but only used in modules is now
loaded in said modules.
This does not split up ext.visualEditor.core yet, which is left as an
exercise for the fool-hardy.
Bug: 61075
Change-Id: I6374854eaa13af824c11078d2f7004dc8a211a30
Just say "Default" rather than "Like other pages in this namespace" (let's
put that in the help string/tooltip at some point); order the "default"
value between "yes" and "no" (like for TOC); make sure the panel for the
advanced settings is in the same position in the page menu as the meta-
data dialog.
Follow-up to I30d483b5b6c3df7e
Change-Id: I902eb4f8504866b2dcde32333cf365a59716c2ce
Add a trinary option to the page settings pane of the meta dialog that
lets users set the page to have __INDEX__, __NOINDEX__ or neither (and so
have the default behaviour).
Bug: 57167
Change-Id: I30d483b5b6c3df7ee56a52c744bbdc610a01873d
It can be reused in mw.ViewPageTarget and mw.MobileViewTarget.
Also, check if this.section is undefined instead of not null and update
docs. restoreEditSection() does not accept any arguments.
Change-Id: Ibbcf4cb936a89d3ae77bb61ee97b8ad00a8d8a53
Adds setting and unsetting the #REDIRECT status of the page from the page
settings pane of the meta dialog, and toggle whether this is a static
redirect (i.e., it is not automatically changed when its target is moved).
If the page has a redirect set, the meta dialog will be shown on opening
the page so that users can adjust the redirect more swiftly.
Bug: 47328
Bug: 50878
Bug: 57173
Change-Id: Ibd89cf04486799f292b9fd045dae5bc23fcf6fd4
Rather than setting the wgPostEdit configuration variable when the
user uses VisualEditor, i.e. communicating via mutable global
state, include whether or not the user edited the page in the
ve.deactivationComplete event.
Bug: 52955
Change-Id: I0f5067550921008f74221d6c92882adfe404b3a5
* Use correct class name for setUpToolbar() in MobileViewTarget
* Move shared setUpToolbar() code into ve.init.mw.Target
* Fix iconModuleStyles documentation, remove leading space
Change-Id: Icf5ed36fd817837c0434db8202bef8a78e6cb898
The selector is too weak and results in the toolbar being placed
in positions it shouldn't be! Whoopsy!
Change-Id: I63540130e4de01f9326fe110d606985fea70b644
The toolbar in very desktop vector skin specific
In mobile we want to have more control over the toolbar,
and its placement.
* Thus make setUpToolbar abstract
And move the function to ViewPageTarget
* Introduce ve.init.mw.Target.static.iconModuleStyles to
allow the use of different icons
* Update the mobile toolbar to only have B and I tools
Change-Id: I4c72b4b9128b3a74de8b8b5bce7664fbb315216b
The jqXHR parameter is optional, so handle the case where it's null
gracefully.
Also fix the documentation for this method, it was full of lies.
Change-Id: I6ab799846a4d4b0d10cc5fd4d8c47264b1845bdf
Extend default paste rules to prevent lists/tables/references/headings
as applicable.
Also update submodule to master (76ff210).
New changes:
f1a927f Internal paste rules and type conversions
Bug: 59603
Change-Id: I952f98477219a55d25a2bd817344bde58a4862d4
New changes:
* e7e2833 - Update uses of Push/IconButtonWidget to ButtonWidget
* d9d9eb5 - Update OOjs UI to v0.1.0-pre (d9bab13)
* d9bab13 - The Great Button Refactor of 2014
* 22b93ef - Update OOjs UI build (88b2871)
* 88b2871 - Fix png transparency on required.png
* 670c468 - Add i18n
Also:
* Update uses of Push/IconButtonWidget to ButtonWidget as there
is a breaking change in new OOjs UI version.
This was separated from commit I325a4dcc316d0.
Change-Id: I82220d15221c52be03feafcfc85c2bd6c12ba462
When running in the context of MediaWiki, VisualEditor should tee its event
stream to MediaWiki's main event bus, mw.track(), so that MediaWiki event
subscribers have a unified interface for subscribing to events. Each
VisualEditor event topic is prefixed with 've.'
To test this patch, you can use this snippet:
mw.trackSubscribe( 've', function ( topic, data ) {
console.log( this, topic, data );
} );
Change-Id: I6b3f10b0dd0aa7fa47c3b35e2fc554622960ce52
The down arrow is no longer default, so it needs to be specified
explicitly.
Updates submodule to include indicator changes
(see I0a1faef11a1e7e6ea3e44275c85f2efafae4dc9a)
Change-Id: I32aef3ea2e66fd823aeb07dac06cfefba9954270
It is treated specially which results in it being set to opacity=0 instead
of hidden, and leaves a large space at the top of the document. Removing
special treatment of it results in it being hidden properly.
Bug: 52243
Bug: 54325
Change-Id: I2d6157708bd7b4c3a7c6474b1612862120f963b7
Instead of having a hard-coded array of preference-triggered modules
that we need to maintain in multiple places, manage this data in one
place in a configuration variable, and explicitly declare the preference
and module names rather than interpolating both of them from a name.
This allows extensions to add preference-triggered modules, and it
allows them to have preference names and module names that aren't
prefixed with 'visualeditor-enable-' and 'ext.visualEditor.' respectively.
Change-Id: I9eb14349cd39125d5c11ffb44c962cc5febb6ba0
This creates a new panel in the meta dialog, "Page settings", where page-
level settings will be, err, set. For now, this exposes just the
behavioural switches for the presence/absence of the Table Of Contents –
__NOTOC__ and __FORCETOC__.
As part of this change, the meta dialog is renamed to "Options" to be
less confusing, and the icon for the meta dialog is changed to the
generic one for dialogs, which was previously unused. The page settings
pane is provided first in this list, given that the categories pane
(amongst others) is now directly accessible through the toolbar menu.
Bug: 56866
Bug: 56867
Change-Id: I33ce05c19d2e19b249e1cefd26fd0e3697d0085d
Move target.surface from mw.Target to Target
* All targets use this, let's standardise it.
Move target.$document from mw.ViewPageTarget to Target
* It was initialised with null in mw.ViewPageTarget, but the
assignment happened in mw.Target. So it should be moved up
at least to mw.Target.
* Since it is useful to have in sa.Target as well, moved it up
to the abstract Target, and implemented in sa.Target and
immediately used in the standalone demo where we were already
duplicating the find( '.ve-ce-documentNode' ).
Add missing target.setupDone = false; in sa.Target
Add missing target.toolbar to Target
* Was used in all subclasses, but never initialised in any of
the constructors. Let's standardise this property name as well
(instead of initialising it in three places).
Move target#event-surfaceReady from mw.Target to Target
* sa.Target uses it as well, and considering Platform#initialize
is already standardised in the abstract class, Target#setup
being deferred is most likely to happen in each target as well
so let's avoid different events being invented for the same
thing and consistently use 'surfaceReady'.
Change-Id: Ia8bde188a4cde7e1615c2ae9c5b758eefc5d9cb7
Follows-up I55ef2622c9eacc which activated code introduced in
mw.Target in commits before that one that caused a change in the
execution order.
Hiding of page content (regular wiki page content provided by
original view request) must happen before the surface document is
focussed.
We used to hide the content from mw.ViewPageTarget#setUpSurface,
which is called from #onReady, which focusses the document after
setUpSurface is done.
Most of this code was moved to mw.ViewPageTarget#onSurfaceReady
which is the listener for the surfaceReady event emitted from
If our surface document gets focus while the original wikipage
content container is still there, the view port is forced to
scroll down because our surface is the next element sibling after
the wikipage container in the DOM.
And browsers (apparently Chrome is not affected) naturally retain
scroll position even if the elements above the one you "scrolled to"
disappear.
We can't (and shouldn't) move the hidePageContent call because
that's the responsibility of the Target subclass, so instead
moved the document focus to below the hidePageContent which is
now also part of the responsibility of the Target subclass.
Also:
* Removed target.surfaceOptions reference because that property
does not exist. We never passed a second argument here, and
whatever this was intended for, doesn't exist.
Bug: 58089
Change-Id: I230fbd5401cbd6e3b9450c7f156650409be8ef16
Let's experiment with this via our local Gruntfile. If it works
fine we can install it in Jenkins (similar to node-csslint).
Verify through $ npm install && npm test;
Fixed all outstanding violations.
Also:
* Added syntaxhighight to ignore.
* Added imetests (which contain unformatted JSON) to ignore.
* In ve.dm.ModelRegistry#matchTypeRegExps, removed redundant
!! cast from the [+!!withFunc] statement which was hitting
a bug in node-jscs. All callers to this local private function
pass a literal boolean true/false so no need to cast it.
* Removed "/* key .. , value */" from ve.setProp, though this
wasn't caught by node-jscs, found it when searching for " , ".
* Made npm.devDependencies fixed instead of using tilde-ranges.
This too often leads to strange bugs or sudden changes. Fixed
them at the version they were currently ranging to.
Bug: 54218
Change-Id: Ib2630806f3946874c8b01e58cf171df83a28da29
Was already implemented in the parent class. Moved setPasteRules() so it
would still get run, everything else had already been moved.
Change-Id: I55ef2622c9eacc8b46bd3487919165bccfc347d5
Currently it takes 4 arguments which are all properties
of the document model, so just pass the model instead and
access the properties later. Rename to getDomFromModel.
Change-Id: I0c378a04dc08b9b90bdc3984f8fa8c4acfe0b667
Sometimes a save is not a save, but a switch to the wikitext editor; in this
case, the save dialog doesn't exist, so don't assume that it does.
Bug: 57947
Change-Id: Ic2df7d2066ba03564ed531e1d31351cd27441abe
That's where they belong IMO, since ViewPageTarget is the one that
has .activate() and .deactivate(), and mw.Target doesn't retain any
state (apart from some caching things).
Change-Id: Ia6cf5bac9054163d54ab492d691d8ce9d6a3bb90
* changes:
Split apart onSaveError logic for other mw targets
mw.ViewPageTarget: Remove unused onTokenError handler covered in onSaveError
Create base MobileView config and target refactor
Changes include:
* Target mobile for ve dependencies
* Create mobile view constructor
** Some tools like dialogs are excluded for now
* Refactor mw.target to permit code reuse
** Split out pageTarget view functionality from core init methods
Change-Id: I786b63ab57518fc6af7761501259ed66592f70e3
Otherwise the old save dialog will still be around if the user sets up
another surface (e.g. a second edit), but won't be attached to the DOM.
Bug: 57654
Change-Id: I23c10849a212534bdd0600637d8ad4fa3ebc4fb7
* changes:
Plain text paste with paste special
Use rare unicode characters for paste placeholders
Rich paste
Add fixUpInsertion to newFromDocumentReplace
This allows things outside of VisualEditor to style themselves
differently while the editor is active.
Bug: 57555
Change-Id: Ief6b5f53096dd5eeb43a72a7bb182a2c04ec97ca
Allow pasting of rich (HTML) content.
ve.ce.Surface
* Use a sliced document clone for converting to DM HTML (copy)
* Add full context to pasteTarget before copying
* Add ve-pasteProtect class to spans to prevent them being dropped
* Implement external paste by converting HTML to data and inserting
with newFromDocumentInsertion
* Remove clipboard key placeholder after read so they aren't picked
up by rich paste. Hash no longer includes the placeholder.
* Detect the corruption of important spans and fallback to clipboard
data HTML if available.
ve.dm.LinearData
* Add clone method for copy
ve.dm.ElementLinearData
* Add compareUnannotated for use by context diffing.
* Add sanitize method for cleaning data according to a set of rules.
ve.dm.Transaction
* Add range parameter for inserting a range of a document only,
e.g. stripping the paste context.
ve.dm.Document
* Implement sliced document clone creation so that DM HTML
is generated correctly in onCopy
ve.dm.DocumentSlice
* Replaces LinearDataSlice. Now has two ranges for balanced data
and data with a full context.
ve.init.Target.js
* Define default, loose, paste rules (just remove aliens).
ve.init.mw.ViewPageTarget
* Define strict MW paste rules:
+ no links, spans, underlines
+ no images, divs, aliens
+ strip extra HTML attribues
ve.init.sa.Target, ve.init.mw.ViewPageTarget, ve.ui.Surface
* Pass through and store paste rules.
Bug: 41193
Bug: 48170
Bug: 50128
Bug: 53828
Change-Id: I38d63e31ee3e3ee11707e3fffed5174e1d633b42
We were using it for the pop-out save dialog, but now that the save
dialog is real dialog, we don't need it any more.
Change-Id: I72697b5502d5f3fd19f2369a754a62d614af715b
Move the userPrefEnabled check out of isAvailable and instead check
it in-line with isAvailable for setting up the tabs with CSS, but
not for the veaction=edit function.
Bug: 55900
Change-Id: I23984e377ff3fc797e921546492b8c73a5101235
* Don't use setTimeout() within a change event, because change fires
after the text has already changed
* Don't use .$input.val(), use .getValue() instead
* Don't use .placeholder()
** Reaching into .$input is bad
** Any use of .placeholder() is TextInputWidget's responsibility
** All browsers we support also support placeholder natively
* Remove .editSummaryByteLimit from ViewPageTarget, unused
* Remove ve.bind() wrapping, we already have var saveDialog = this;
Change-Id: I380575fec8d02d1191bfc1f3f235b94c64cd23b6
The save dialog DOM is pretty big, so building it on demand
like every other dialog out there seems like a good idea.
Change-Id: I02077c3e45f01d3467d41616eb879bd1d608a82b
Each used their own implementation of building a form and submitting it.
The edit source one wasn't passing in the oldid, which caused edit
conflicts.
Also introduced a separation between form fields (for the action=edit UI)
and API options, building one from the other.
Bug: 56835
Change-Id: I38547b4ba1827f4028a2255109cba2a57cd59e8a
It looks like it also came from there originally, because it uses
this.pageExists which doesn't even exist in MWSaveDialog. This caused
all pages, even existing pages, to be watched when 'watchcreations'
was set.
This logic really belongs server-side, though.
Bug: 56206
Change-Id: Idf500383b27a93136dc0cfdd60a2e7b2607af95c
Move generation of initial edit summary from setupSaveDialog() to
restoreEditSection().
This allows us to get rid of the properties tracking whether both
halves of the edit section handling had happened, because they're
now in the same method.
Moving setupSaveDialog() down so it runs after restoreEditSection();
this is needed for the communication via this.initialEditSummary
to work correctly.
Change-Id: I06a9c5cf5c752acea8a2ac25d0ffb6ac61cfe986
Add prepareCacheKey() which submits HTML for serialization and saves
the resulting cache key, and tryWithPreparedCacheKey() which uses that
cache key (if available; if pending, it waits for it) for API requests.
Implemented save(), serialize() and showChanges() in terms of
tryWithPreparedCacheKey().
When opening the save dialog, run the conversion, cache it, and fire
off a prepareCacheKey(). Then use the cached conversion for save/diff/
serialize. This means we don't convert multiple times, and it causes
the prepared wikitext to be used.
Bug: 55979
Bug: 56011
Change-Id: I1d56fe88d312e9810a57d56a285ccdf4f1facf42
initialize() is currently called synchronously, but once the CSS
transplantation code is fixed and it goes back to being async, that'll
cause problems.
* Add this.setupDeferred and use it to defer setupCheckboxes() until
after initialization
* Move code populating the edit summary from ViewPageTarget into
MWSaveDialog and use .setValue() rather than manipulating the
TextInputWidget's DOM. Defer this until after init as well
* Move clearing of the diff from ViewPageTarget into MWSaveDialog,
and don't connect it to the transact event at startup, only when
we've actually shown a diff
* Remove swapPanel( 'save' ) from ViewPageTarget, instead do this
on setup in the dialog itself
Bonus:
* Document events
* Get rid of onFooButtonClick handlers in favor of array syntax
Change-Id: Idcdae5e013340f4519db4387bab507e714d47941
* Use 'this' instead of 'viewPage' in setupSaveDialog()
* Unwrap unnecessary .each() in restoreEditSection()
Change-Id: I45d0c9714d59e195d0c4413ed3dbe9cbabe45e9d
Previously was failing for two reasons:
1. FF requires the form to be attached before submitting
2. options.watch failed because of FF's annoying Object.prototype.watch
Bug: 56767
Change-Id: I7b3d349f057f5b87f823ce788b4143f817af5303
Changes:
* Cleanup the window API to use more consistent and intuitive methods - we
now use initialize/setup/teardown instead of
initialize/onSetup/onOpen/onClose as methods which are overridden, and
use open/close methods to control the window
* Change events around to have opening/open and closing/close events which
act as before/after points during the opening/closing process
* Make WindowSet and Context respond to windows being opened, rather than
opening them directly
* Fix a LinkInspector creation mode bug where the initial text doesn't get
reset
* Move inspector, a VisualEditor concept, back to VE
* Cleanup naming of SurfaceDialog, SurfaceToolbar, etc. to use shorter
names, they were given Surface* names when the generic ones were also in
VE, but now the generic ones are in OO, so they can return to their
original names
Change-Id: I82c4fed8bcb3fb5630938c8bc4dd9b2d5f1a8c1d
Renamed events:
* performance.domLoad --> performance.system.domLoad
* performance.domSave --> performance.system.domSave
New events:
* performance.system.activation: total load time
* performance.system.domDiff: timing of paction=diff; like .domSave
* performance.system.domSerialize: timing of paction=serialize; like .domSave
* behavior.lastTransactionTillSaveDialogOpen: time from last transaction
until user opened save dialog
* behavior.saveDialogOpenTillSave: time from save dialog opening to user
clicking save
* behavior.saveDialogOpenTillReview: time from save dialog opening to user
clicking review (skipped when a cached diff is shown)
* behavior.saveDialogClose: when user closes save dialog; duration is time
* performance.user.saveComplete: time from user clicking save to successful
save completion; 'retries' indicates # of badtoken retries
* performance.user.saveError.*: time from user clicking save to failure;
'retries' indicates # of badtoken retries
** performance.user.saveError.abusefilter
** performance.user.saveError.badtoken: token was bad and we prompted the user
** performance.user.saveError.captcha
** performance.user.saveError.editconflict
** performance.user.saveError.empty
** performance.user.saveError.spamblacklist
** performance.user.saveError.unknown
* performance.user.reviewComplete: time from user clicking review to diff showing
* performance.user.reviewError: time from user clicking review to diff failure
since dialog was opened
Change-Id: I9815fa637d34c766c163e181d2f9527d3f32a7c3
Objectives:
* Rename this.$ to this.$element
* Rename this.$$ to this.$
* Get rid of the need to use this.frame.$$
* Rename OO.ui.Element.get$$ to OO.ui.Element.getJQuery
Changes: (using Sublime Text regex patterns)
* Replace "get$$" with "getJQuery"
* Replace "\.(\$)([^\$a-zA-Z])" with ".$element$2"
* Replace "\.(\$\$)" with ".$"
* Replace "'$$'" with "'$'"
* Set this.$ to null in constructor of OO.ui.Window
* Set this.$ to this.frame.$ in initialize method of OO.ui.Window
* Replace "\.(frame.\$)([^\$a-zA-Z])" with ".\$$2"
Bonus:
* Use this.$() in a bunch of places where $() was erroneously used
Change-Id: If3d870124ab8d10f8223532cda95c2b2b075db94
By serialising the current DOM, and injecting it into a form we can
end up in the source editor with our VE changes converted.
Bug: 50687
Change-Id: Iafcc02a737d9c6c3a59dce1caff130d47ca25650
Calculate and store the two inner whitespace values of the body in the
dm.Document. When converting back, make sure the first/last nodes
pre/post outer whitespace matches the inner left/right whitespace
of the body.
Bug: 54964
Change-Id: I45f1ffd63669f25a6cae878400bfe21719ed58ee
Objectives:
* Hamburger menu in actions area of toolbar
* Add tools that open specific pages in the meta dialog
* Fix support for using setPage in ve.ui.PagedOutlineLayout
* Allow passing setup config objects through window open calls
* Add dialog action, similar to inspector action
* Fix incorrect or missing documentation
Change-Id: I2d2c9b87554fb2a0c90ed6944a58b38a37efa712
* Move and rename generic parts of ve.ui to OO.ui
* We now have a UI test suite because ve.Element (outside ve.ui)
is now part of oojs-ui, so it needs a test suite.
* Added to the MW test run (just like we do for unicodejs).
* Updated csslint config (also added ve-mw and syntaxhighlight
which were missing).
oojs-ui still depends on the TriggerRegistry in VE, this is addressed
in a follow-up commit.
Change-Id: Iec147155c1ddf20b73a4d15d87b8742207032312
Add it as an optional parameter to the constructor, and create a new
one if omitted.
This is going to be used to resolve URLs according to the right <base>,
but really that's a hack and we should come up with a better way to
track metadata from the <head>.
Change-Id: I49dfc81ff793d73e08a20e502d681a15613d23f7
* Replace surface 'transact' event with 'documentUpdate' event
* Have surface listen for all document transactions and update selection
as appropriate (as well as emitting 'documentUpdate')
* Implement change() in terms of setSelection()
** Queue 'contextChange' events so contextChange is only emitted once
** Use this.transacting flag to prevent setSelection() (which is called
because the model emits transact events) from doing too much
** Behavioral change: lock/unlock now emitted separately for
transaction and selection changes
Change-Id: I44425d260ec70758f99d13f99e41f5c993d260c2
Instead, listen to 'select', or to 'transact' on the dm.Document.
This commit only fixes uses outside of the dm/ce.Surface ecosystem.
ce.Surface still listens to 'change'.
ve.init.mw.ViewPageTarget.js:
* Rename onSurfaceModelTransact to clearSaveDialogDiff and bind it to
the document's transact event instead
* Rename onSurfaceModelChange to checkForWikitextWarning and bind it
to the surface's transact event. This is needed because the function
inspects the surface's selection, which isn't yet in a consistent
state when the document's transact event fires
ve.ui.MWReferenceDialog.js:
* Rename onSurfaceChange to onDocumentTransact and rebind accordingly
ve.ce.ProtectedNode.js:
* Get rid of onSurfaceModelChange
* Instead, bind positionPhantoms to the document's transact event
directly, and only bind it while phantoms are visible
ve.ui.Context.js:
* Rename onChange to onModelSelect and rebind accordingly
* Rename afterChange to afterModelSelect
* Drop check for undefined selection, no longer needed now that we're
listening to a finer-grained event
ve.ce.Surface.test.js:
* Listen to 'select' instead of 'change'
Change-Id: Ifeb1a1fc5427696f2aae5441d4b54dde366793e0
If there was an error loading the HTML from Parsoid, ViewPageTarget
would try to tear down the save dialog, which caused a crash because
the save dialog doesn't exist yet at that point.
Change-Id: Ia50756a19cb775be96b90e87b642eb2a38f254ce
* For consistency with target.loading, target.saving should be either a boolean
false or a jqXHR, with the latter type indicating a pending save attempt.
* Rename 'DOM Retrieved' topic to 'performance.parsoid.domLoad' (and thus
inaugurate a convention of hierarchical, dot-separated topic names).
* Add a 'performance.parsoid.domSave', which is a near-mirror of domLoad, but
measures the time it takes to save a DOM.
* Remove three old ve.track events, because they are not used and because their
name and signature are not consistent with current usage.
- page-save-attempt
- page-save-success
- page-edit-impression
Change-Id: I54602394eee5d6d9229c01d868cb366c9f56b2c3
Major changes:
* Create a MW specific save dialog class
* Widgetize save dialog elements
* Simplification of viewPageTarget
Minor changes:
* Added getWindow method to windowSet and setTitle methods to window class
* Add transition css properties to dialog styles
Bug: 48566
Bug: 50722
Bug: 51918
Bug: 52175
Bug: 53313
Change-Id: I8c0db01fb8477a9b3d3dfe2a6073ac67869ce40e
After 6ec34a3de the edit notice button was no longer hidden by
default if there were no notices. The alert icon was always
visible (when clicked it would show "0 notices").
In addition, on any page (except pages with edit notices) it
would throw a fatal exception at load time because method .hide()
doesn't exist.
As a result, current master shows an incomplete toolbar (e.g. not even
a Save button!)
Change-Id: Ib6e91c4756664c25fbb7403ef54b4fffcc0f9938
Class ve-init-mw-viewPageTarget-pageTitle added various
transition settings that were never used. Meanwhile, we're doing
fadeTo which sets inline opacity css every X ms until the
animation is finished.
* Changed the inline jQuery animation to use css transitions
instead.
* Removed the inexistent and obsolete ms-transition declaration.
* Removed ":visible" from selector query. This makes the selector
more performant (since :visible is a proprietary Sizzle keyword)
and it was obsolete anyway. The classes don't affect display none/hide,
this is handled naturally by the browser now.
Change-Id: Ibdfb442ff6c743ef16b514a7696796ee27821887
When deactivating before the surface became active (e.g.
this.active is still false, as case is the case when Parsoid
isn't running), the teardown sequence was incomplete.
Most notable, the page title (h1.firstHeading) was still dimmed
after cancelling the alert for Parsoid error, eventhough
everything else was shown and restored.
* Moved call to #showTableOfContents in #deactivate up for
consistency with #activate.
* Added call to #restorePageTitle in #deactivate so that the
title is restored even if the surface didn't activate yet.
* Removed calls to various methods in #tearDownSurface that
were already called by #deactivate.
Now activate/deactivate and setUpSurface/tearDownSurface are
in balance.
Change-Id: Ibb2fbf0e5ab9b6a028d4e139c13aa7ff8c82be82
Previously we returned ElementLinearData from the converter, then
stripped out the MetaLinearData. This meant that before processing
the ElementLinearData from the converter actually contained metadata
which is confusing.
The new document constructor stores the converter results in a
FlatLinearData object and simultaneously populates element and meta
data stores.
Also in this commit I have moved various methods from ElementLinearData
to FlatLinearData, from which ElementLinearData inherits.
Change-Id: I64561bde2c31d8f703c13ac7b0a0c5f7ade9f3d4
Objectives:
* Use widgets to render toolbar actions
* Remove labels next to help notices and edit notices buttons
* Add a close button to the help notices and edit notices
Overview:
* ve.ui.ButtonWidget is now abstract, use ve.ui.PushButtonWidget instead
* ve.ui.IconButtonWidget now inherits from ve.ui.ButtonWidget
* ve.ui.PopupWidget's display method no longer takes x and y arguments
* Fixup naming issues in MWCategoryPopupWidget
* Fixup naming issues with some ve-init-mw CSS classes
* Rename ve-mw/ui/styles/ve.ui.Widget.css to ve.ui.MWWidget.css
* Change uses of "callout" to "tail"
* Add hyperlink functionality to buttons
* Make buttons accessible through focusing, but make unfocusable by
clicking
* Add head option to popup for rendering a title and close button
Bug: 52386
Change-Id: Iea2c8df1be64d40f9c039873d89ee540cc56e687
Toolbars may want to control the target as well as the surface (spoiler alert!).
The new TargetToolbar has a pointer to its target as well as its surface.
Change-Id: I928316d9e23ac3f3de3e76c34ef0ac3d27855ab3
Sometimes GitInfo returns a version ID of false if it can't
find the right files. In this case we should hide the whole
message as it is meaningless.
Bug: 53050
Change-Id: I71161df7588aa9311bc1fdf6b064cc6d8c155f61
In commit e1f8ee7 the return statement was moved into the
userPrefEnabled check, however addClass( 've-available' ) was
still unconditional. This has now been restored.
Change-Id: Ia59bfed93a8849a529cc3b9d1d2e0619d65240d4
Objectives:
* Got rid of mw prefixing in tools, inspectors and dialogs
* Simplify tool classes so they can be generically used as items in bars, lists and menus
* Add support for a catch-all toolbar group
* Simplify tool registration, leaning on tool classes' static name property
* Move default commands to command registry
* Move default triggers to trigger registry
* Get language tool working in standalone
Change-Id: Ic97a636f9a193374728629931b6702bee1b3416a
By passing in the information via a ResourceLoaderModule this
gets around any concerns with performance (version information
is read from the file system).
The version information is appended to the beta toolbar dialog.
Bug: 53050
Change-Id: I7836e1d4003416cbb7e18e3435aa87d82fd5c2e2
Objective:
* Use the MW link specifically, since the target/command system doesn't
understand the group/id/extension concept yet
Change-Id: I8b756fa0bb55468312bb30d45ac5b943ff7362b5
Objectives:
* Make it possible to add items to toolbars without having to have all
toolbars know about the items in advance
* Make it possible to specialize an existing tool and have it be used
instead of the base implementation
Approach:
* Tools are named using a path-style category/id/ext system, making them
selectable, the latter component being used to differentiate extended
tools from their base classes, but is ignored during selection
* Toolbars have ToolGroups, which include or exclude tools by category or
category/id, and order them by promoting and demoting selections of
tools by category or category/id
Future:
* Add a way to place available but not yet placed tools in an "overflow"
group
* Add a mode to ToolGroup to make the tools a multi-column drop-down style
list with labels so tools with less obvious icons are easier to identify
- and probably use this as the overflow group
Change-Id: I7625f861435a99ce3d7a2b1ece9731aaab1776f8
This patch rounds off change I29740fa7a by replacing calls to EventLogging's
eventLog.logEvent with calls to VisualEditor's ve.track. ve.track publishes
events by providing an interface, ve.trackRegisterHandler, which event handlers
use to subscribe to VisualEditor events. By making it the responsibility of the
web analytics framework to register itself as a handler, VisualEditor can
remain decoupled from (and indeed ignorant of) any particular event logging
implementation. This allows VisualEditor to be integrated with many different
web analytics platforms with nothing more than a bit of glue code for mapping
ve's event semantics to those of the target platform.
The practical difference that this makes is that it frees VisualEditor from
having to know about EventLogging or from having to load EventLogging
components, which means we can remove quite a lot of gnarly code. My current
plan is to migrate the code for registering and loading the 'Edit'
schema module to Extension:CoreEvents, which is also where I'll commit the
handler for VE events. (CoreEvents exists precisely to provide an organized
place for persistent but WMF-particular instrumentation.)
Once this patch is merged and deployed, the following two configuration
variables may be removed from mediawiki-config:
- $wgVisualEditorEnableSplitTest
- $wgVisualEditorEnableEventLogging
Change-Id: Idfdf692668d2adfbe029e8f0c4ff9e96c60ff741
Mostly as a demonstration of how easy this is with MWExtensionNode.
The icon was chosen with the following criteria:
1. Recognisable (the ankh is quite common in popular culture, right?)
2. Doesn't look idiotic to academics (I've consulted an Egyptology
PhD and they can confirm it's not the glyph for penis)
3. Renders well at <16x16
That said it does look a little like a stick man...
Bug: 43118
Change-Id: I9f9e8af501401866bfeecf0eec3690a705fbd4db
Objectives:
* Use a class for toolbar groups to add more functionality later
* Rename addTools method to setup
Changes:
*.php
* Add link to new file
* Move ui element classes up for more general use
ve.init.mw.ViewPageTarget.js, ve.init.sa.Target.js, ve.ui.Context.js,
ve.ui.SurfaceWidget.js
* Update use of addTools method
ve.ui.Tool.css, ve.ui.Toolbar.css
* Move styles between sheets
ve.ui.Toolbar.js
* Rename addTools to setup
* Use ve.ui.ToolGroup objects when building tools
ve.ui.ToolGroup.js
* New class, encapsulates tools
Change-Id: Ic3a643634a80a8ac7d6f6f47f031d001c7efaee7
Objective:
* Make it possible to make a toolbar without a surface
Changes:
*.php
* Links to new file
ve.ui.Toolbar.js, ve.ui.SurfaceToolbar.js
* Split toolbar into generic and surface specific classes
*.js
* Update symbol names
Change-Id: Ice063a2fb67b5ce5155cdc96a0d47af49eee48cb
Follows-up ced2a8a which moved the tab layout to the server-side
and changed it to set up "source" tab and section links always
everywhere (even if VE would not be availabe in the namespace
or browser).
The JS logic (which continues to exist to take care of pages
cached before we moved it to PHP and/or to fix up pages cached
with a different configuration in the future) didn't do this yet
causing the "Edit source" tab to inconsistently appear on pages
for anonymous users viewing pages where VE is not available.
Change-Id: Ic575b3fcef17e636adaa338abc7748a4388ed9a9
For configured wikis, show a dialog that welcomes the user to the
amazing and fantabulous world of VisualEditing, which is not only full of
wonderment and joy but also may lead to increased popularity and love.
The dialog only shows up once (uses a cookie).
Change-Id: I8e7c4dc2c63b36594378a543b9d66291395eebcf
* Generate the edit tabs and the section edit links in PHP, with a
fallback in JS for cases where we don't have them yet due to
caching. But only change things if VE is enabled, and have the JS
correct the state if the wrong cached HTML comes through.
* Make the order of the tabs/links and the messages to use as captions
configurable
* Make the edit tabs and section edit links always be present in the
page (regardless of namespace, user prefs, etc.) but be hidden and
have JS unhide them (using html.ve-available) if appropriate
* Add appendix messages so we can do a superscript "beta" even in places
where we can't use HTML in the message
VisualEditor.php:
* Add new hook registrations
* Remove edit link caption messages from the init init module because
they're now added dynamically in VisualEditor.hooks.php
* Add a noscript CSS module so we can hide some things in JS-less
environments
* Remove $wgVisualEditorTabLayout and replace it with
$wgVisualEditorPosition
* Add config vars for link captions, with null causing us to use
the default caption
* Add config vars for link caption appendices. Too many config vars
but we'll clean that up later
VisualEditor.hooks.php:
* Dynamically add tab messages to the init init module
* Remove unused globals in onBeforePageDisplay()
* Add noscript CSS module
* Add a SkinTemplateNavigation hook that changes and reorders the edit
tabs as appropriate
* Add a DoEditSectionLink hook that overwrites the edit section links
* Export the new config variables to JS
VisualEditor.i18n.php:
* Add beta appendix message
* Add a message for the default VE edit section link
ve.init.mw.ViewPageTarget.init.css:
* Remove the animation on the edit section links
* Darken the color of the brackets and the pipe from #ccc to #555
* Style the beta message to be superscript-like (but not real <sup> to
avoid moving the baseline)
ve.init.mw.ViewPageTarget.noscript.css:
* Hide the VE edit tab, the pipe and the VE edit section link initally
unless and until JS unhides
ve.init.mw.ViewPageTarget.init.js:
* Toggle .ve-not-available / .ve-available
* Edit tabs
** Only generate the the edit tabs if they're not already there from PHP
** Rewrite the edit tab generation to mirror what's being done in PHP
* Section edit links
** Same as for edit tabs
** Also add mw-visualeditor-expanded to pad the brackets
ve.init.mw.ViewPageTarget.js:
* #ca-ve-edit is now always the VE tab (and #ca-edit always the
edit source tab) so update the .selected behavior accordingly
Change-Id: Idcb15faea7fabe5fe7578b1508079969b27d2469
Added wgIsArticle to isViewPage checks, otherwise we were attempting
to load VE dynamically on Special:Move/Delete, which resulted in a
broken h1 title and odd behavior off the 'Read' tab.
Also added !wgIsArticle to pageExists. This is a bit of a hack because
we don't have any info on page existence in the JS on these pages
(I think?). But it's better to display 'Edit' for a page that doesn't
exist, than 'Create' for a page that does.
Bug: 49000
Change-Id: Ib47e5524d41e6066b362e0f5645750c769de5193
