Treat these responses not as an API failure. Show a generic
preview whenever the server responds with a 404.
Bug: T160744
Change-Id: Id6169d9d4c7493f5b6511cc78fe65d448cdadc03
Require that two promises are resolved (or one is rejected) before the
FETCH_COMPLETE action is dispatched. The first promise represents the
gateway request and the second represents an arbitrarily long delay. If
the first resolves before the second, then there'll be a delay until the
second resolves; whereas if the first rejects, then there's no delay.
Change-Id: I496fe317337745c593594efff26688c46d661bf3
The delay/timeout logic in actions#fetch will require more than one wait
call, for example.
Changes:
* Update the stub created in setupWait to store all deferred-promise
pairs and update the integration tests so that they don't use the stub
accidentally.
* Remove all references to the waitDeferred/waitPromise properties.
* Fix tests that relied on the waitDeferred/waitPromise properties being
available regardless of whether wait had been called.
* Update outdated or brittle - in the sense that it didn't reference
constants but their values - inline documentation.
Change-Id: I94345cdf4126b6c540d4fb8135a7a7e4d0507bed
Mixing in the delay was introduced in If3f1a06f so that the total RTT
for an API request could be calculated. Now that the FETCH_END action is
dispatched when the gateway request ends and not when the preview model
is resolved, this additional information (state) is redundant.
Change-Id: I7e6ffe0945ffedd9425525fa7da855e729d50b77
Ideally, the preview model is resolved after 500 ms, regardless of
whether the internal gateway takes 100 or 300 ms. Given this, there's an
important distinction to be made between the "fetch" ending and it
completing and their associated actions.
Changes:
* Dispatch the FETCH_COMPLETE action when the preview model is resolved.
* Update the reducers accordingly.
Change-Id: I62c9cb0430284b76338ea80bd170cac5af4be9d0
If the user has disabled PP via the settings dialog or they aren't in
the experimental condition, then link titles shouldn't be emptied.
Because this behavior has to respond to the user enabling/disabling PP
within the same page session, change the linkTitle change listener
rather than conditionally registering it.
Bug: T161277
Change-Id: I53c1a1d3e4436e2ffe08da27da388f394f4e8817
If the user abandons link A (or preview A) and immediately dwells on
link B, then log a "dismissed" or "dwelledButAbandoned" event.
In this context, "immediately" means before the ABANDON_END action is
dispatched, which, currently, is 300 ms after the ABANDON_START action
is dispatched.
Bug: T159490
Change-Id: I49f0f5dfb3e6c08844f1794fee8cb6170e93981b
Reducer changes:
* Add tests for ABANDON_END case.
* Extract the body of the ABANDON_END case into the createAbandonEvent
helper function.
Additional changes:
* totalInteractionProperty -> totalInteractionTime elsewhere in the same
file.
Bug: T159490
Change-Id: Ifff34271395f330b83cfe487e84800fe2d6f3811
Reducer changes:
* Make the eventLogging reducer queue a "tapped settings cog" event when
reducing the SETTINGS_SHOW action.
This was discovered while testing I6ce7d72b.
Bug: T159490
Change-Id: I6ce7d72b364d20c71b0e2cfed98e99f7997895e5
Like dwelling and abandoning, clicking on a preview is the same as
clicking on a link.
This fixes scenario 3 from T159490.
Bug: T159490
Change-Id: I6d9ff52b62bec93ebfcc9b6d267a46cf961852fb
For now, mirror the interaction modelling in the preview reducer in the
eventLogging reducer to handle the user either:
* Repeatedly dwelling on and abandoning a link.
* (Repeatedly) moving their mouse between the link and the preview.
This fixes scenarios 1, 2, 5, and the general issue from T159490.
Bug: T159490
Change-Id: Ia771f325e541c107348b16b47c5b786c97847652
For logging to work:
1. $wgWMEStatsdBaseUri needs to point to a valid statsv endpoint,
e.g. 'https://en.wikipedia.org/beacon/statsv'.
2. $wgPopupsStatsvSamplingRate needs to be set. Note that the codebase
already contains the EventLogging functionality, which is configured
separately. Separately configuring different logging mechanisms
allows us to avoid sampling mistakes that may arise while choosing
one or the other. For example, let's say we want to use EventLogging for
10% of users and statsv for 5%. We'd sample all users into two
buckets: 50/50. And then we'd have to set the sampling rates as
20% and 10% respectively, only because of the bucketing above. To avoid
this kind of complications, separate sampling rates are used for each
logging mechanism. This, of course, may result in situations where a
session is logged via both EventLogging and statsv.
3. The WikimediaEvents extension needs to be installed. The extension
adds the `ext.wikimediaEvents` module to the output page. The
logging functionality is delegated to this module.
Notable changes:
* The FETCH_START and FETCH_END actions are converted to a timed action.
* The experiments stub used in tests has been extracted to the stubs
file.
Logged data is visualized at
https://grafana.wikimedia.org/dashboard/db/reading-web-page-previews
Bug: T157111
Change-Id: If3f1a06f1f623e8e625b6c30a48b7f5aa9de24db
... thumbnails.
A good example of the difference in behaviour of the PageImages API is
here <T156800#3087507>. The API defers to File#transform, which scales
the largest dimension of an image, not always the width, e.g. if an
image is 1000px x 2000px and the request is for a thumbnail "of 1800px",
then the thumbnail will be 900px x 1800px.
Bug: T156800
Change-Id: I64bc2244ee78a594298d8637233b0da1083700eb
Keep all configuration-like values in one file.
Changes:
- moved EXTRACT_LENGTH to constants.js file
Change-Id: Ibe5ecfc60f2c09a30a9ecb3586bc5fb6a7365476
If the image isn't an SVG then it shouldn't be scaled past its original
dimensions. Handle the case where the requested thumbnail can't be
generated on the server as the original is too small ( < 320px,
currently [0]) in the same way.
Moreover, if the image happens to have the exact dimensions that we're
requesting (300px or 600px wide, currently [1]), then use the original
image to avoid unnecessary work/pressure on caches.
Supporting changes:
* Update the SVG_RESTBASE_RESPONSE fixture to use the extension returned
by RESTBase (and the PageImages extension) for the thumbnail:
.svg.png.
[0] https://github.com/wikimedia/restbase/blob/master/v1/summary.yaml#L121
[1] https://github.com/wikimedia/mediawiki-extensions-Popups/blob/master/src/constants.js#L2
Bug: T156800
Change-Id: I5d0aa161e80869e4b4f5425d906d1e753047a3a3
The same file is on preview/model.js which is the one actually used by
the application. For some reason the file is a duplicate of model.js,
and it is the file that is required on its QUnit tests.
This patch removes it and points the unit tests to the correct file,
preview/model.js
It was also required by popups.js which was removed in the previous
commit.
Change-Id: Id175a764d9b67fb8d0e8fbf4a4623a3420f76094
We used to query the MediaWiki API to only return non-free images.
This patch allows us to query the API for images with any license.
The RESTBase end point is already returning images with any license.
Bug: T158632
Change-Id: I9ac60b6f74a7f7eb2cb160ee522c2c3a26dd0858
Rather than manipulating the URL of the original image to get the URL of
the appropriately sized thumbnail, manipulate the URL of the thumbnail
image.
While we could manipulate either the thumbnail or original image URL,
there are subtle differences between the two, so manipulating the latter
makes the generateThumbnailData function as simple as possible, e.g. we
don't have to splice in "/thumb" after "/commons".
Also, ensure that the thumbnail's dimensions are scaled appropriately.
Bug: T156800
Change-Id: I6825bad14b1131dc81f23dcf120cf8ffb7d7b4f6
Supporting changes:
* Use mw.Map stub
* Use assert.expect instead of number of assertions in QUnit.test
(deprecated in newer QUnit)
* Don't specify assert.expect( 1 ), because it is the default (no
assertions will make the test fail).
Change-Id: I64a3e76917e75b8c6d496f20e5b5dcafb338a46a
* Logged in users bypass bucketing. They keep working as before.
* When Page Previews is configured as a beta feature, logged out users
won't see the feature.
* If an anonymous user has enabled/disabled the feature using
the settings cog then they will see or not see the feature
depending on the value of their setting.
* The other anonymous users are bucketed. By default 90% of these
users see the feature, the other 10% don't. These numbers can be
controlled by the config variable `wgPopupsAnonsEnabledSamplingRate`.
Bug: T157700
Change-Id: I5307587b10f4849c4e82d3b064ff759121c2de67
Because of the globals mw.popups.wait usage and mocking in both actions
and integration, they need to be migrated in a single step, fixing them
both to require wait.js and mock using mock-require instead of the
global variable.
Additional changes:
* Fix FIXMEs about actions.js using the global mw.popups.wait instead of
the require one.
* Fix the unit tests to use require mocking for wait.js instead of
global variable mocking in both integration and actions tests
* Change tests that use deferreds and promises to be async qunit tests
(Deferreds are asynchronous with jQuery in node, apparently they
weren't in the browser)
* Change integration.test.js to use require on Redux and ReduxThunk
Change-Id: I8e3e87b158bd11c9620e77d0a73e611cf9e82183
The render change listener is hard coupled to the renderer file, so in
order to migrate the test, instead of stubbing a global variable, we had
to either inject the renderer into the change listener factory as done
everywhere else, or mock the require call.
In order to do one thing per commit, we're mocking the require call
here to get the migration done, but added a FIXME to use dependency
injection instead in a future change.
Change-Id: I50f82cdc9664d34b8a8ccc1ff368f7209404159d
Given this is a jsdom environment assertions using jQuery's :visible
have been changed to check the display property for visibility.
See https://github.com/tmpvar/jsdom/issues/1048
Change-Id: Ifad8067c0b50053a94ac977ee1f1f5a3066bfa16
And on the way there actually put it in a changeListeners/ folder and
rename it to eventLogging.test.js
Change-Id: I60685021841b44f606f39b07bf7f5262344262f4
In order to run qunit tests on sources that use common.js modules, set
up infra to run qunit tests in the node cli when running:
npm run test:node
Changes:
* Add npm script test:node that runs the tests
* Run node tests on CI (npm test)
* Add a qunit node test runner: mw-node-qunit
* Migrate a test from the root hierarchy and another one from the nested
one to prove it works (globs fail otherwise)
* reducers/settings.test.js to node qunit to prove it works
* counts.test.js to node qunit to prove it works
Change-Id: I55d76b7db168f3745e0ac69852c152322ab385c3
