* web.svg was deprecated in favour of browser.svg.
* Update sad-face.svg based on OOUI speechBubble-ltr/rtl
* Apply preview-generic/disambiguation grey colour using CSS.
Change-Id: I8feea1b526ff85c4ffdee21ef42c616e72881e76
It is set based on the same conditional that loads the code,
thus checking it inside the loaded code is a no-op and adds
extra HTML to the <head> that blocks text/layout rendering and
delays fetching of Popups JS.
Bug: T219342
Change-Id: I9c1f4b3861ce2cecb654eb0a78469a616730a40b
I had to disable ESLint to be allowed to upload this patch. It starts
complaining about something in code I did not even touched. The error
message does not make any sense to me (something about globals being
forbidden in code where I can not spot anything that would be remotely
global).
Change-Id: I6d4b178a65126c4b81b87d99142a6cdc845ae5ee
When a thumbnail in portrait-mode is narrower than the 200px
expected width, the SVG clip-path should be shifted on the x-axis
in order to align with the thumbnail image.
Adds extra test-cases to validate this logic.
Bug: T204627
Change-Id: I9359c9fb335e5fad3f7d5ba33ee89d2a1f26b8b2
We run into this issue already one time, see Ifb5fe89 (T214710). The
exact same applies here.
The effect of this bug is that for certain references (typically ones
with a colon character in their name) the "jump down" link will be
broken.
Change-Id: Ic6723bd910cb5e5e1e1872ce39f2e271012245de
During story time on 2019-03-12 it was decided to consistently talk
about "References" in all messages. Main motivation is that this is
the term the community is most familiar with, and it is also the term
that is used in reference section headings most of the time.
Bug: T215063
Change-Id: Iaab8d2c0da1546a3c9d27bc8e2e1c784050ed135
The method itself has not much to do with gateways as such, it's
more about the general preview type selection. Since the preview
types "live" in the model, I thought it might good to move it there.
Doing that the "original" getPreviewType method in the model was renamed
to avoid conflicts. If I get this right, that method is quite specific to
page previews, since it processes the output from the TextExtracts API-
request. - Therefore I also removed the TYPE_REFERENCE there, because this
code path will never be reached with that type afaik.
Inspired by the comments in Id1fa7dad59d8fe80bc60c1e2d7c3fb4087e52d1f and
as preparation for that patch.
Bug: T215420
Change-Id: Ic9e24a73e945c7d56435c656ecfdb42b65601d22
This happened one time before and was fixed via T212419. It now came
back after I2670331, a patch for T214861 that made the title parser
accept more links than before.
This patch implements a decision tree that goes as follows:
1. If it's a link to another page, it can't be anything but a page
preview, as having a peek into another page is effectively the
definition of a page preview.
2. Otherwise it's probably a reference preview, but only if:
* It's a link with a jump mark.
* The link is actually marked as being a "reference".
* Reference previews are enabled.
3. If neither of these definitions fit, do nothing. Note this is not
"hiding errors" we would be able to fix in this code. There are many
ways to manually arrange wikitext in a way that it looks like one or
the other, without fulfilling all requirements. Unfortunately the
user who would see error message or dysfunctional popups would not
be the same as the user who wrote such wikitext.
Bug: T216683
Change-Id: I8d021f19ddc73a261e6a0c62959ddd0cb1d3182d
See the discussion at I6bd7acc. In this codebase it was decided to not
use "classic" JavaScript, but document it with the benefits TypeScript
comes with. Since I27b5cb0 a dev dependency is in place that makes the
upper case JQuery type work.
All the lower-case jQuery this patch happens to touch have been placed
by me, not knowing better at this point.
Change-Id: I76ef8eabaf4850f07b140dac6f489df37422263e
These are annotations for ESLint as described at:
https://eslint.org/docs/user-guide/configuring#specifying-globals
I'm not sure where the `…: false` comes from. I assume it is a mistake
and does not have an effect.
I tried to move these annotations closer to the line they are about in
case there is only one line. And move it to the top when there is more
than one line using the global.
Change-Id: I4bd112c5fddd8a97d829a9b91707b8eb7cd7a332
An id="…" can potentially be used to target elements individually, manipulate
them, or show them in another context. This is done with the elements in the
file pointer-mask.svg. But not with any other image.
The file-rule="…" only has an effect on shapes that intersect with itself.
This is not the case for this basic "L" shape.
If you think this is fine, I might look at the original OOUI icons as well
and apply the same optimizations on them. But there are 800+ of them to be
looked at, and I want to invest the time only if you think it's worth it.
Change-Id: Ifa4bd60a436e58d3a7c1536f8201fe76fbdac57c
While reviewing the code of the reference endpoint I found it encodes
two CSS class names, "mw-reference-text" and "reference-text". So far
our scraping gateway only implemented one.
https://phabricator.wikimedia.org/diffusion/GMOA/repository/master/
This patch also extracts a piece of code to a named function. This makes
it much easier to read, I feel.
Bug: T214908
Change-Id: I9d1bb1f4c21eb9d57a6b763ca1f756e6cf7049e0
These icons are currently unused because the gateway does not deliver
the necessary information. This will be used starting with I6223cbb.
This patch aims to introduce all resources needed by the later.
Bug: T214908
Change-Id: Ie0c3c059222700169f2605c3123554c74d974256
The definition of "self-link" in this context is an <a href="…">
element that points to the exact same URL as the current document's
location, excluding a possibly different #… fragment. This is typically
the case when the <a> element does not contain a full URL, but something
like href="#fragment". JavaScript's HTMLAnchorElement.href getter
automatically expands this to be a full URL.
Example:
var a = document.createElement( 'A' );
a.href = '#test';
console.log( a.href );
Notes:
* This new code assumes the wgPageName setting properly reflects the
page name requested via the current document's location. Core does
give us this guarantee.
* The only URL element that is intentionally not compared is the
protocol.
* This accidentially fixes T215899 as well, because the namespace check
is now bypassed for self-links (as it should).
Bug: T214861
Bug: T215899
Change-Id: I2670331cbbdebf7dc9fc70d7342724534f9f54ec
This patch also removes misplaced empty lines at the beginning of a
scope. In PHP code we even have a sniff for these. In JavaScript we
don't, but I suggest to be consistent about this.
Change-Id: Ic104ae8fe176da1dafa9bc783402adecb71de1f0
According to the standard.
Note: In a previous patch I removed the <?xml …?> line. This conflicts
with what https://www.mediawiki.org/wiki/Manual:Coding_conventions/SVG
suggests. However, I think the removal is ok in this particular case
because this file will never be shown as an image, and never be shown
standalone. Instead, it will be inserted in the documents DOM. The XML
header doesn't matter anyway then.
Change-Id: If23ad54985abb30f8c92500546bd04eeca44fab3
I decided to keep the comments because they are sooo helpful, but
tried to shorten them a bit. The biggest change is the indention with
tabs and the much more compact <path> elements. The shapes are the
exact same. I manually confirmed this for all four.
Change-Id: I2d1294c9ae7e398dcbe2d111c42848d17be8a67e
I tested this with all 16 possible combinations:
* The pointer can show up in all 4 corners.
* The popup can contain a thumbnail or not. The code for the pointer
is very different then, because the SVG masks are only relevant in
this scenario.
* The thumbnail can be tall or not.
* I even tested tall popups without a thumbnail. This is a combination
that is impossible in production scenarios.
I found 3 issues. This patch fixes 2 of them:
* The pointer is misplaced in the bottom-right corner when the popup
does not have a thumbnail (as reported in T215194).
* The pointer is misplaced in the upper-right corner when the popup
shows a thumbnail.
* The pointer in the upper-right corner is gray instead of white when
the popup is tall, but does not show a thumbnail. As this is not
relevant in production, I did not fixed it.
It seems both misplacements are because of the same reason: For some
reason, calculations are done based on the assumption the popup would
be 300px wide, but it is 320px wide.
Note I did not just added 20 everywhere, but manually alligned the
pointer triangles so they are placed exactly the same distance from
the corner as in the three other corners.
Note I did not tested this (yet) in RTL scenarios.
Bug: T215194
Change-Id: If0ca63d4d4b6e8083c7de1517fe32f49671a40e6
As well as:
* Simplify the selectGatewayType() function a bit. Or was this
intentional?
* Remove a TODO we don't need any more, at least not in this file.
Change-Id: I5528f0012cbaf8b4e88e22c7e2a8d87bf027e8f1
We discovered a bunch of possible solutions (see previous patch sets),
including replacing the `$( document )` selector with a more specific
one. That idea does not pass the linter.
Very late I realized the original selector starts with
`#mw-content-text`. This heavily limits where popups are allowed to
appear: really only in the main text content area.
We should limit reference popups to the exact same scope.
This fixes the issue described in T215195. Before, the content of the
popup was covered by the selector. Reference links *inside* the popup
would trigger another popup, which makes the current popup disappear.
Now the popup itself is not covered by these event handlers any more.
Bug: T215195
Change-Id: I142aee68abbd57ca321873855fef9209e0db0bbf
There are a few cheap checks done before this regular expression is
even needed, most notably the check for a pretty URL (without query
parameters). Since the vast majority of links processed by this parser
are pretty, I believe this optimization is worth it.
Change-Id: I730b87dc010161e8bc3f311c517293c0ad553326
This is now possible since the render functions return jQuery objects.
All this code is exclusively used in the pagePreview.js file, and
doesn't need to make the already very big renderer.js file even
bigger.
Note the tests for all renderers have always been collected in a
single file. That's why the test case does not move.
Change-Id: I0c24638751c5f0e93d2bc0f3f4bb61fa0cf50d15
To make sure that we enable the link highlighting in the Cite extension we want
to trigger the click handler on the original footnote link. This is done by
passing the id of the source element to the model and the renderer.
Bug: T213905
Change-Id: I0bd59ac326269f3c0850946851fb79b611dc2a57
When we started reorganising the code around the gateway selection
we forgot moving the docs and typedefs from the (now) more specific
page.js file to the (now new) index.js. - This patch fixes that.
See also I5efa9fb8f63f1487c627eb9a3f1fe47f43c611cc
Change-Id: I7b3582882247e22497d3a37b896a8a7c9950cf0d
This CSS class is used by the regular wikitext content area, and used
by certain CSS selectors (e.g. the external web link arrow).
The DOM structure for each popup is (intentionally) created outside
of this scope, at the end of the current page's body. This works
great for page previews because the do *not* want to share any styles
with the rest of the page. But reference previews want to do this.
In this patch I also remove the inner <span>. It was misplaced (note
the name) and resulted in block elements nested in an inline element.
Bug: T214463
Change-Id: I740e37a2ed929edf971b348fbf20e5fb12012d37
This gets rid of a little bit of code duplication, and makes the
interfaces all conform to one standard again after I05ed4b8 left them
in a little inconsistent (but properly documented) state.
Bug: T214970
Change-Id: If8407c1a48aff1cb31fc2e74b3c2b846e79a3cb5
As discussed in Iaadcce9. This does have a few benefits:
* Less code in the already pretty big render.js file.
* The code setting the target attribute is much closer to where it
belongs: in the file that specifies how the content of a reference
popup should look and behave.
* The class name "mwe-popups-extract" is not mentioned in two different
files, but in the same.
Note this changes the signature of this src/ui/templates/… file to not
return an HTML string any more, but a jQuery object. The other templates
still return strings. I believe this is fine, and not that much of a
difference anyway. The signatures don't need to be identical. And the
jQuery object still represents the exact same HTML as before.
If it helps we could change all templates/… signatures accordingly.
Could be done in this or a separate patch.
Bug: T213908
Bug: T214970
Change-Id: I05ed4b886f79c5ae748f53ab9fed965dfd217620
This solves the (I believe) only regression we introduced: A bad fake
reference like <span class="reference">[[Other article#Section]]</span>
showed a page preview for the "Other article" before we introduced
reference previews, but would have shown nothing after I9ec57e0.
Checking if the link is a self-link solves this and possibly more related
issues. Only self-links can point to a footnote on the same page.
Manually created fake-references like
<span class="reference">[[#Section]]</span> still have a chance to show
nothing in case the manually created HTML does not strictly follow the
expectations in the gateway. There is not much we can do about this. We
should not accept any arbitrary HTML but need to make at least *some*
assumptions.
Bug: T214970
Change-Id: I86e91bf45c3ae4c6a4086f7f1c7b1280fd400d17
We updated this documentation just recently via Ie370cfe. We followed
what the createModel() function does. But this is not the only way a
PreviewModel object can be created. Reference previews, for example,
don't use it.
Instead of following createModel(), I checked what the different popup
types actually use.
Bug: T214970
Change-Id: I2c4293a48387836dc30e18d10d952b4a26e6f2b5
This is mainly done to increase testabilty of this part. I am a bit
unsure if this should ( have been ) integrated in the former index.js
that's now the page.js. - See also the refactoring done before.
Bug: T214971
Change-Id: I90d0441510bc1ec0b4900a392afcbaff6a552377
This is as preparation to introduce a gateway switch that decides if the
page or reference gatway should be selected. Moving that code to it's own
realm makes that path better testable.
Bug: T214971
Change-Id: I5efa9fb8f63f1487c627eb9a3f1fe47f43c611cc
