Add prepareCacheKey() which submits HTML for serialization and saves
the resulting cache key, and tryWithPreparedCacheKey() which uses that
cache key (if available; if pending, it waits for it) for API requests.
Implemented save(), serialize() and showChanges() in terms of
tryWithPreparedCacheKey().
When opening the save dialog, run the conversion, cache it, and fire
off a prepareCacheKey(). Then use the cached conversion for save/diff/
serialize. This means we don't convert multiple times, and it causes
the prepared wikitext to be used.
Bug: 55979
Bug: 56011
Change-Id: I1d56fe88d312e9810a57d56a285ccdf4f1facf42
initialize() is currently called synchronously, but once the CSS
transplantation code is fixed and it goes back to being async, that'll
cause problems.
* Add this.setupDeferred and use it to defer setupCheckboxes() until
after initialization
* Move code populating the edit summary from ViewPageTarget into
MWSaveDialog and use .setValue() rather than manipulating the
TextInputWidget's DOM. Defer this until after init as well
* Move clearing of the diff from ViewPageTarget into MWSaveDialog,
and don't connect it to the transact event at startup, only when
we've actually shown a diff
* Remove swapPanel( 'save' ) from ViewPageTarget, instead do this
on setup in the dialog itself
Bonus:
* Document events
* Get rid of onFooButtonClick handlers in favor of array syntax
Change-Id: Idcdae5e013340f4519db4387bab507e714d47941
* Use 'this' instead of 'viewPage' in setupSaveDialog()
* Unwrap unnecessary .each() in restoreEditSection()
Change-Id: I45d0c9714d59e195d0c4413ed3dbe9cbabe45e9d
Previously was failing for two reasons:
1. FF requires the form to be attached before submitting
2. options.watch failed because of FF's annoying Object.prototype.watch
Bug: 56767
Change-Id: I7b3d349f057f5b87f823ce788b4143f817af5303
Changes:
* Cleanup the window API to use more consistent and intuitive methods - we
now use initialize/setup/teardown instead of
initialize/onSetup/onOpen/onClose as methods which are overridden, and
use open/close methods to control the window
* Change events around to have opening/open and closing/close events which
act as before/after points during the opening/closing process
* Make WindowSet and Context respond to windows being opened, rather than
opening them directly
* Fix a LinkInspector creation mode bug where the initial text doesn't get
reset
* Move inspector, a VisualEditor concept, back to VE
* Cleanup naming of SurfaceDialog, SurfaceToolbar, etc. to use shorter
names, they were given Surface* names when the generic ones were also in
VE, but now the generic ones are in OO, so they can return to their
original names
Change-Id: I82c4fed8bcb3fb5630938c8bc4dd9b2d5f1a8c1d
Renamed events:
* performance.domLoad --> performance.system.domLoad
* performance.domSave --> performance.system.domSave
New events:
* performance.system.activation: total load time
* performance.system.domDiff: timing of paction=diff; like .domSave
* performance.system.domSerialize: timing of paction=serialize; like .domSave
* behavior.lastTransactionTillSaveDialogOpen: time from last transaction
until user opened save dialog
* behavior.saveDialogOpenTillSave: time from save dialog opening to user
clicking save
* behavior.saveDialogOpenTillReview: time from save dialog opening to user
clicking review (skipped when a cached diff is shown)
* behavior.saveDialogClose: when user closes save dialog; duration is time
* performance.user.saveComplete: time from user clicking save to successful
save completion; 'retries' indicates # of badtoken retries
* performance.user.saveError.*: time from user clicking save to failure;
'retries' indicates # of badtoken retries
** performance.user.saveError.abusefilter
** performance.user.saveError.badtoken: token was bad and we prompted the user
** performance.user.saveError.captcha
** performance.user.saveError.editconflict
** performance.user.saveError.empty
** performance.user.saveError.spamblacklist
** performance.user.saveError.unknown
* performance.user.reviewComplete: time from user clicking review to diff showing
* performance.user.reviewError: time from user clicking review to diff failure
since dialog was opened
Change-Id: I9815fa637d34c766c163e181d2f9527d3f32a7c3
Objectives:
* Rename this.$ to this.$element
* Rename this.$$ to this.$
* Get rid of the need to use this.frame.$$
* Rename OO.ui.Element.get$$ to OO.ui.Element.getJQuery
Changes: (using Sublime Text regex patterns)
* Replace "get$$" with "getJQuery"
* Replace "\.(\$)([^\$a-zA-Z])" with ".$element$2"
* Replace "\.(\$\$)" with ".$"
* Replace "'$$'" with "'$'"
* Set this.$ to null in constructor of OO.ui.Window
* Set this.$ to this.frame.$ in initialize method of OO.ui.Window
* Replace "\.(frame.\$)([^\$a-zA-Z])" with ".\$$2"
Bonus:
* Use this.$() in a bunch of places where $() was erroneously used
Change-Id: If3d870124ab8d10f8223532cda95c2b2b075db94
By serialising the current DOM, and injecting it into a form we can
end up in the source editor with our VE changes converted.
Bug: 50687
Change-Id: Iafcc02a737d9c6c3a59dce1caff130d47ca25650
Calculate and store the two inner whitespace values of the body in the
dm.Document. When converting back, make sure the first/last nodes
pre/post outer whitespace matches the inner left/right whitespace
of the body.
Bug: 54964
Change-Id: I45f1ffd63669f25a6cae878400bfe21719ed58ee
Objectives:
* Hamburger menu in actions area of toolbar
* Add tools that open specific pages in the meta dialog
* Fix support for using setPage in ve.ui.PagedOutlineLayout
* Allow passing setup config objects through window open calls
* Add dialog action, similar to inspector action
* Fix incorrect or missing documentation
Change-Id: I2d2c9b87554fb2a0c90ed6944a58b38a37efa712
* Move and rename generic parts of ve.ui to OO.ui
* We now have a UI test suite because ve.Element (outside ve.ui)
is now part of oojs-ui, so it needs a test suite.
* Added to the MW test run (just like we do for unicodejs).
* Updated csslint config (also added ve-mw and syntaxhighlight
which were missing).
oojs-ui still depends on the TriggerRegistry in VE, this is addressed
in a follow-up commit.
Change-Id: Iec147155c1ddf20b73a4d15d87b8742207032312
Add it as an optional parameter to the constructor, and create a new
one if omitted.
This is going to be used to resolve URLs according to the right <base>,
but really that's a hack and we should come up with a better way to
track metadata from the <head>.
Change-Id: I49dfc81ff793d73e08a20e502d681a15613d23f7
* Replace surface 'transact' event with 'documentUpdate' event
* Have surface listen for all document transactions and update selection
as appropriate (as well as emitting 'documentUpdate')
* Implement change() in terms of setSelection()
** Queue 'contextChange' events so contextChange is only emitted once
** Use this.transacting flag to prevent setSelection() (which is called
because the model emits transact events) from doing too much
** Behavioral change: lock/unlock now emitted separately for
transaction and selection changes
Change-Id: I44425d260ec70758f99d13f99e41f5c993d260c2
Instead, listen to 'select', or to 'transact' on the dm.Document.
This commit only fixes uses outside of the dm/ce.Surface ecosystem.
ce.Surface still listens to 'change'.
ve.init.mw.ViewPageTarget.js:
* Rename onSurfaceModelTransact to clearSaveDialogDiff and bind it to
the document's transact event instead
* Rename onSurfaceModelChange to checkForWikitextWarning and bind it
to the surface's transact event. This is needed because the function
inspects the surface's selection, which isn't yet in a consistent
state when the document's transact event fires
ve.ui.MWReferenceDialog.js:
* Rename onSurfaceChange to onDocumentTransact and rebind accordingly
ve.ce.ProtectedNode.js:
* Get rid of onSurfaceModelChange
* Instead, bind positionPhantoms to the document's transact event
directly, and only bind it while phantoms are visible
ve.ui.Context.js:
* Rename onChange to onModelSelect and rebind accordingly
* Rename afterChange to afterModelSelect
* Drop check for undefined selection, no longer needed now that we're
listening to a finer-grained event
ve.ce.Surface.test.js:
* Listen to 'select' instead of 'change'
Change-Id: Ifeb1a1fc5427696f2aae5441d4b54dde366793e0
If there was an error loading the HTML from Parsoid, ViewPageTarget
would try to tear down the save dialog, which caused a crash because
the save dialog doesn't exist yet at that point.
Change-Id: Ia50756a19cb775be96b90e87b642eb2a38f254ce
* For consistency with target.loading, target.saving should be either a boolean
false or a jqXHR, with the latter type indicating a pending save attempt.
* Rename 'DOM Retrieved' topic to 'performance.parsoid.domLoad' (and thus
inaugurate a convention of hierarchical, dot-separated topic names).
* Add a 'performance.parsoid.domSave', which is a near-mirror of domLoad, but
measures the time it takes to save a DOM.
* Remove three old ve.track events, because they are not used and because their
name and signature are not consistent with current usage.
- page-save-attempt
- page-save-success
- page-edit-impression
Change-Id: I54602394eee5d6d9229c01d868cb366c9f56b2c3
Major changes:
* Create a MW specific save dialog class
* Widgetize save dialog elements
* Simplification of viewPageTarget
Minor changes:
* Added getWindow method to windowSet and setTitle methods to window class
* Add transition css properties to dialog styles
Bug: 48566
Bug: 50722
Bug: 51918
Bug: 52175
Bug: 53313
Change-Id: I8c0db01fb8477a9b3d3dfe2a6073ac67869ce40e
After 6ec34a3de the edit notice button was no longer hidden by
default if there were no notices. The alert icon was always
visible (when clicked it would show "0 notices").
In addition, on any page (except pages with edit notices) it
would throw a fatal exception at load time because method .hide()
doesn't exist.
As a result, current master shows an incomplete toolbar (e.g. not even
a Save button!)
Change-Id: Ib6e91c4756664c25fbb7403ef54b4fffcc0f9938
Class ve-init-mw-viewPageTarget-pageTitle added various
transition settings that were never used. Meanwhile, we're doing
fadeTo which sets inline opacity css every X ms until the
animation is finished.
* Changed the inline jQuery animation to use css transitions
instead.
* Removed the inexistent and obsolete ms-transition declaration.
* Removed ":visible" from selector query. This makes the selector
more performant (since :visible is a proprietary Sizzle keyword)
and it was obsolete anyway. The classes don't affect display none/hide,
this is handled naturally by the browser now.
Change-Id: Ibdfb442ff6c743ef16b514a7696796ee27821887
When deactivating before the surface became active (e.g.
this.active is still false, as case is the case when Parsoid
isn't running), the teardown sequence was incomplete.
Most notable, the page title (h1.firstHeading) was still dimmed
after cancelling the alert for Parsoid error, eventhough
everything else was shown and restored.
* Moved call to #showTableOfContents in #deactivate up for
consistency with #activate.
* Added call to #restorePageTitle in #deactivate so that the
title is restored even if the surface didn't activate yet.
* Removed calls to various methods in #tearDownSurface that
were already called by #deactivate.
Now activate/deactivate and setUpSurface/tearDownSurface are
in balance.
Change-Id: Ibb2fbf0e5ab9b6a028d4e139c13aa7ff8c82be82
Previously we returned ElementLinearData from the converter, then
stripped out the MetaLinearData. This meant that before processing
the ElementLinearData from the converter actually contained metadata
which is confusing.
The new document constructor stores the converter results in a
FlatLinearData object and simultaneously populates element and meta
data stores.
Also in this commit I have moved various methods from ElementLinearData
to FlatLinearData, from which ElementLinearData inherits.
Change-Id: I64561bde2c31d8f703c13ac7b0a0c5f7ade9f3d4
Objectives:
* Use widgets to render toolbar actions
* Remove labels next to help notices and edit notices buttons
* Add a close button to the help notices and edit notices
Overview:
* ve.ui.ButtonWidget is now abstract, use ve.ui.PushButtonWidget instead
* ve.ui.IconButtonWidget now inherits from ve.ui.ButtonWidget
* ve.ui.PopupWidget's display method no longer takes x and y arguments
* Fixup naming issues in MWCategoryPopupWidget
* Fixup naming issues with some ve-init-mw CSS classes
* Rename ve-mw/ui/styles/ve.ui.Widget.css to ve.ui.MWWidget.css
* Change uses of "callout" to "tail"
* Add hyperlink functionality to buttons
* Make buttons accessible through focusing, but make unfocusable by
clicking
* Add head option to popup for rendering a title and close button
Bug: 52386
Change-Id: Iea2c8df1be64d40f9c039873d89ee540cc56e687
Toolbars may want to control the target as well as the surface (spoiler alert!).
The new TargetToolbar has a pointer to its target as well as its surface.
Change-Id: I928316d9e23ac3f3de3e76c34ef0ac3d27855ab3
Sometimes GitInfo returns a version ID of false if it can't
find the right files. In this case we should hide the whole
message as it is meaningless.
Bug: 53050
Change-Id: I71161df7588aa9311bc1fdf6b064cc6d8c155f61
In commit e1f8ee7 the return statement was moved into the
userPrefEnabled check, however addClass( 've-available' ) was
still unconditional. This has now been restored.
Change-Id: Ia59bfed93a8849a529cc3b9d1d2e0619d65240d4
Objectives:
* Got rid of mw prefixing in tools, inspectors and dialogs
* Simplify tool classes so they can be generically used as items in bars, lists and menus
* Add support for a catch-all toolbar group
* Simplify tool registration, leaning on tool classes' static name property
* Move default commands to command registry
* Move default triggers to trigger registry
* Get language tool working in standalone
Change-Id: Ic97a636f9a193374728629931b6702bee1b3416a
By passing in the information via a ResourceLoaderModule this
gets around any concerns with performance (version information
is read from the file system).
The version information is appended to the beta toolbar dialog.
Bug: 53050
Change-Id: I7836e1d4003416cbb7e18e3435aa87d82fd5c2e2
