A MetaList is a collection of MetaItems representing all of the
metadata in a ve.dm.Document, and it updates itself live as the
underlying document changes.
Currently this interface is read-only, I'll add mutators next.
Change-Id: If7bfc9563af37e22dcdca9a682d6decc2f6f1872
We'll need this to let a MetaList observe a Document and adjust to changes.
We should probably also have SurfaceFragment listen to this event instead.
Change-Id: I9e811e242969eb44afe0b4fa8153d0fb1b0071cd
Before, replacement operations that both inserted and removed data at
the same time would be treated as removals followed by insertions,
so we'd reap the metadata from the affected range and move it to the
start of the range. For a pure replacement, this doesn't make any sense.
Instead, preserve the first min(insertLength, removeLength) elements in
the metadata array, then perform a pure insertion splice or a pure
removal splice for the length adjustment. Any metadata reaped in a
removal splice is restored at the offset where we started removing,
after the preserved portion.
These changes make the behavior of metadata reaping saner in general
(the previous behavior had the potential to move metadata around if it
was near a paragraph opening or closing and you converted the paragraph
to a heading), and makes the behavior match up with translateOffset(),
which is desirable for MetaList synchronization.
Change-Id: If9a1c6a7cf43ead7e3e1e8f6e081b139ca65fa53
Rather than meta-things being special kinds of nodes, they are now a
separate class of things (MetaItems) along with Nodes and Annotations.
* Created a generic ve.dm.MetaItem that meta items inherit from.
There will be actual instances of this class as well in the upcoming
meta group code.
* Renamed MetaNode to AlienMetaItem, MWMetaNode to MWMetaItem,
'metaBlock'/'metaInline' to 'alienMeta'
* Created a MetaItemFactory, handle meta items in the ModelRegistry
* Kill ve.dm.Node.static.isMeta, now obsolete
ve.dm.Converter:
* Pass in the MetaItemFactory
* Look up data element types in the ModelRegistry rather than the
NodeFactory, because they can be either nodes or meta items
* Document createDataElement() and make explicit that modelClass can be
either a node or a meta item
* Handle meta items in getDataFromDom()
* In getDomFromData(), check the MetaItemFactory as well as the NodeFactory
Change-Id: I893709c6f3aa00f85c1b905b70f9f4e597bdeada
Replacing [a-zA-Z] with a long unicode expression which encompasses
all the characters in the unicode 'letters' category. Similarly replacing
[0-9] with an expression for 'numbers'.
Bug: 44085
Change-Id: Idd403339caa24769ce08133dda06ab6d4b9d694e
Also in this commit is a minor fix to the regular expression so it
behaves as documented (the hyphen needed escaping).
Bug: 44085
Change-Id: Idc315e2dce79be8f028b5681c60f74e175b9d869
isolateAndUnwrap now unwraps to a level determined by a target type
i.e. the type you are going to convert to.
Also in this commit wrap/unwrap/rewrap have been refactored to use
getLengthDifference. unwrap now takes an inner/outer unwrap depth.
Change-Id: I3c6249de43232a9ef64f498a0aaf66b1c44973f2
Wrapper paragraphs should only be unwrapped if they are the first
element in their parent - or if there is a block level element separating
them from the previous unwrapped paragraph.
Empty paragraphs should only be unwrapped if they are empty and the
last element in their parent.
Also in this commit is a simple test for IndentationAction.decrease().
Bug: 45590
Change-Id: I1f47d12db6d57d984fd4607f667a3b62c53f3dd6
Heading and Preformatted nodes have rules that should only
exist under a document node in MediaWiki.
Two new node types have been created as has a new DropdownTool which
uses these. The MW init options have been changed to use the new
DropdownTool.
Bug: 45295
Change-Id: I3f47e1ae1f5c1415bde58a75385e4bf5f4b8fffc
Add a static.name property to ce nodes and make sure both ce
and dm nodes always use the static.name property in constructors
and registration calls.
The result of this is that any given node type should now only
appear once in the code as a string.
Bug: 45701
Change-Id: Ibf31de16ab28ad58209c1443cd74f93dda278998
Follows-up I44bcb79a59 and various other changes.
Please remember to generate documentation and resolve
all warnings before pushing into gerrit.
Change-Id: I8a372443e841308463376d8673ce027a97bbcd30
rewrapAllNodes is effectively the same as unwrap then wrap
except it operates as one transaction as so avoids a potentially
invalid intermediate state.
Added some more comments for unwrapAllNodes and renamed a varaible
for consistency.
Fixed a typo in Transaction.newFromWrap comment.
Bug: 45242
Change-Id: Ie752a788d087055d97c7c6f75f59c6a2680d26c7
Previously, we would translate to the right of an insertion, but for
wrapping transactions that means we end up with something like
<ul><li>|<p>...</p></li></ul>|, which doesn't make any sense. This
change changes this to <ul><li>|<p>...</p>|</li></ul>.
* Add parameter to translateOffset() that toggles the behavior for
the offset before an insertion
* In translateRange(), translate start and end differently
** In some cases this can map them across each other, fix that
Change-Id: Ia2197b08d9f6763be3f2db5a59546ddc3f74a281
We already combine consecutive operations of other types, but didn't do
that for remove. We have to do this, though, because translateOffset()
gets confused otherwise.
Change-Id: I4285a3efd9f2297398f57e2f24adb26adafdf465
This changes the node API to work with multiple elements, so we can
support about groups. Instead of passing in and returning single DOM
elements, we use arrays of DOM elements.
ve.dm.Converter:
* Pass modelRegistry into the constructor
* Remove onNodeRegister handler and its data
* Remove getDataElementFromDomElement() and
getDataAnnotationFromDomElement(). Most logic moved into
getDataFromDom(), some into createDataElement()
* Remove createAlien(), replaced with
createDataElement( ve.dm.AlienNode, ... )
* Replace doAboutGrouping() (which wrapped about groups) with
getAboutGroup() (which returns an array of the nodes in the group)
* Put in a hack so <meta>/<link> elements with an mw: property aren't
alienated
* Remove about group wrapping behavior in favor of just outputting
multiple nodes
ve.dm.AlienNode.js:
* For multi-element aliens, only choose inline if all elements are
inline, not just the first one
ve.dm.example.js:
* Add html/0 stuff for meta nodes
* Fix test case to reflect new alien behavior
Change-Id: I40dcc27430f778bc00a44b91b7d824bfb2718be6
Defaults to false, nodes can opt into about grouping. Not being used
yet, will be used in the converter rewrite.
Change-Id: Ic2a529241e69fb07ac926c826ead0108193b3050
wrapAllNodes was calulating the new selection incorrectly. This has
been fixed and a test added.
unwrapAllNodes takes a depth as its argument and unwraps that many
elements from inside the selection.
Tests for wrap/unwrap apply also now check that applying a wrap
and then its inverse as an unwrap result in the document reverting
to its original state.
Change-Id: I7dcacdfb5894be59ffad69b369d7b32933a25b61
In our test case, offset 12 was mapped to 16, but that should be 11.
The problem here was that the offset right before the removal was
mapped to right after the removal, but that's only valid if we're
dealing with a removal, not when we're dealing with a replacement
where we're both removing and inserting data.
Change-Id: Ibf3c1463c0de009578cd50736f19bae82669ced8
This method will take a selection of siblings and ensure they
are the only chlidren in their first parent which can be placed anywhere
(for example the first parent of a tableCell which can be placed anywhere
is a table, and for a listItem is a list).
The method ensures no redundant empty tags are created, so if
the selection encompasses all siblings then no action is taken.
Also in this commit are two test cases run against ve.dm.example.isolationData.
Change-Id: I783bd5ecd9d43d61f9b2685985409b4d746cbe94
The Parsoid output will also be expected to be a full HTML document. For
backwards compatibility, we allow for the Parsoid output to be a
document fragment as well. We don't send a full document back yet, also
for b/c -- we'll change this later once Parsoid has been updated in
production.
ve.dm.Converter.js:
* Make getDataFromDom() accept a document rather than a node
** Split off the recursion (which does use nodes) into its own function
** For now we just convert the <body>. In the future, we'll want to do
things with the <head> as well
* Pass the document around so we can use it when creating elements
* Make getDomFromData() return a document rather than a <div>
ve.init.mw.Target.js:
* Store a document (this.doc) rather than a DOM node (this.dom)
* Pass around documents rather than DOM nodes
* Detect whether the Parsoid output is an HTML document or a fragment
using a hacky regex
* When submitting to Parsoid, submit the innerHTML of the <body>
ve.init.mw.ViewPageTarget.js:
* s/dom/doc/
* Store body.innerHTML in this.originalHtml
ve.Surface.js:
* s/dom/doc/
demos/ve/index.php:
* Don't wrap HTML in <div>
* Pass HTML document rather than DOM node to ve.Surface
ve.dm.Converter.test.js:
* Construct a document from the test HTML, rather than a <div>
ve.dm.example.js:
* Wrap the HTML in the converter test cases in <body> tags to prevent
misinterpretation (HTML fragments starting with comments, <meta>,
<link> and whitespace are problematic)
Change-Id: I82fdad0a099febc5e658486cbf8becfcdbc85a2d
Have created builders for insertion, removal, and single element replacement.
In adding Document.getMetadata which is nearly identical to Document.getData,
the two functions have been refactored to use a common static method
getDataSlice, with this.data/this.metadata as an argument.
Document.spliceMetadata has been added. It is essentially spliceData with
the data/metadata synchronisation issue.
Metadata cursor position is now tracked in the TransactionProcessor. Cursor
advancement has been moved to a function so the metadata cursor can be reset
every time the data cursor is moved.
There were unhit bugs in the TransactionProcessor run test section, where
the data being loaded into the test documents wasn't always being deep-copied,
and the assert was looking at getData instead of getFulldata (which wouldn't
be able to test metadata changes).
Change-Id: Ieb20ab3e7827bc7ff04148f147da6728eb1eb666
This gets rid of the meta-specific hack in ve.dm.Document
Later on, I want to use this to get rid of meta-specific hacks in the
converter too, by pushing some of that logic into the ModelFactory.
Change-Id: I1dbee1654fa32d9c7cd521ec325b2553cde219d1
This means that <p data-foo="bar"> will now be converted to a paragraph
with attributes {"html/0/data-foo":"bar"} rather than {"html/foo":"bar"}
This paves the way for multi-element node (about group) handling in the
node API: nodes representing multiple DOM elements will have html/i/attr
to represent an attribute of the i'th DOM element.
Change-Id: Iea52bdccd721942ca708c8f9f47e934524809845
When encountering an inline node (i.e. content node that's not a text
node) within a branch node that's not a content branch node, the
converter should start a wrapper. But it doesn't do this, it only opens
wrappers for text nodes and annotations.
Fixed this in the converter, added a test for it, and fixed an existing
test that asserted the broken behavior.
Change-Id: I6e143e21e68b68f0d85b8772e24a2d3a5d465410
* Introduce context object as specified for
ve.dm.Node.static.toDataElement()
* Remove wrapping variable in favor of context.wrapping
* Remove wrappingIsOurs in favor of context.canCloseWrapper
* Introduce originallyExpectingContent and use it to repopulate
context.expectingContent after closing a wrapper
* Replace most uses of branchHasContent with context.expectingContent
** Except for two cases where we need originallyExpectingContent
These changes fix a case where a metaBlock was generated in an inline
position. Updated the tests to reflect this.
Change-Id: I6baf6053f8a3a0b7d91487f812b9235a7b2b3db1
This allows the converter to provide the node handlers with context
information, which hybrid nodes (such as alien and meta) need to decide
which shape to take.
Change-Id: I36860bee560a38ee39a149109be3706e39258edc
Continues where Ibb682332a6084e357104183641a104e3ae1e253f left off, adding tests and removing inconsistencies between the behavior of the document constructor, which was adding empty text nodes to empty paragraphs, and correcting other tests which expected empty text nodes to be there as well.
Change-Id: I414d061cdd494b8023f14e944eda2910a4dab0d4
When there's 2 entities or inline content nodes (like aliens) with text between them, removing that text should remove the node too. If you don't remove the node then CE won't think to make a slug between the two inline nodes.
Change-Id: Ibb682332a6084e357104183641a104e3ae1e253f
This resolves a TODO
* Added logic to support passing an argument into annotation constructor which is used as the data property (reusing the element argument)
* Updated documentation
* Simplified instantiation of annotations
Change-Id: I142b8fa3883bf70c896a2a568088d833814ef2dc
Extension-specific types are RDFa types (or type regexes) that are
registered with the ModelRegistry separately. If an element has a type
that is extension-specific, then that element can only be matched by a
rule that asserts one of its extension-specific types.
For MediaWiki, we would call
ve.dm.modelRegistry.registerExtensionSpecificType(/^mw:/ ) .
So then an element like <span typeof="mw:foobar"> would either match a
rule specifically for mw:foobar, if one exists, or no rule at all; even
the rule for <span> would not match. The consequence of this is that
elements with unrecognized mw:-prefixed RDFa types are alienated.
Change-Id: Ia8ab1fe5dffb9f813689324372a168e8e4a3e0bc
This won't usefully register the node with the converter right now, but
we need to allow this because the ModelFactory tests will need to have
stub nodes with tag-only matches.
Change-Id: I023cc8ff647363ab55c73dff39b17ca47e9e6681
ModelRegistry registers both annotations and nodes, and performs
matching on both at the same time. It also registers annotations with
the AnnotationFactory, and nodes with the NodeFactory.
Change-Id: I5e68e506a0e573cc0afe6304ccea058ffc20d1c8
Add static properties for matching, data<->DOM conversion, and name. Use
matchTagNames, toDataElement and toDOMElement. name isn't used yet.
Change-Id: I5e7df3303bbd65e6968e931b568c23d76003a9a4
The normalize method doesn't need to be explicitly called anymore because there's not any code that changes the properties of a range directly anymore.
A good way to prove it's not needed anymore is to move the normalization logic to the constructor and then add "console.log(this.from <= this.to );" to the normalize method - you will find that it's never actually doing anything at all because the range was normalized by the constructor.
ve.Range
* Moved normalization logic to constructor
* Removed calls to normalize method
* Removed normalize method
* Simplified documentation for flip method
* Whitespace fixes
ve.Document, ve.dm.Transaction, ve.dm.Surface, ve.dm.Document, ve.ce.Surface
* Removed calls to range.normalize
* Switched to using range.isCollapsed instead of comparing properties directly
Change-Id: I80bfd06f88579c34dce2083c2b70d63ab92f1275
* Made method descriptions imperative: "Do this" rather than "Does this"
* Changed use of "this object" to "the object" in method documentation
* Added missing documentation
* Fixed incorrect documentation
* Fixed incorrect debug method names (as in those VeDmClassName tags we add to functions so they make sense when dumped into in the console)
* Normalized use of package names throughout
* Normalized class descriptions
* Removed incorrect @abstract tags
* Added missing @method tags
* Lots of other minor cleanup
Change-Id: I4ea66a2dd107613e2ea3a5f56ff54d675d72957e
The title attribute should only be rendered. It should not be put in the
HTML that is sent back to Parsoid.
Change-Id: I63c0373c71c3bf01a4238af3ccd02c835a118e2f
Follow up for I6a7c9e8ee8f995731bc205d666167874eb2ebe23
The first pass that Timo took missed the following cases
* "{Array|String}": string is just one of the values
* "{String[]}": string is followed by [] to indicate an array of strings
Change-Id: I65e595e8d37fb624802d84af9536a2d3c5d73c7d
See CODING.md for how to run it.
Mistakes fixed:
* Warning: Unknown type function
-> Function
* Warning: Unknown type DOMElement
-> HTMLElement
* Warning: Unknown type DOM Node
-> HTMLElement
* Warning: Unknown type Integer
-> Mixed
* Warning: Unknown type Command
-> ve.Command
* Warning: Unknown type any
-> number
* Warning: Unknown type ve.Transaction
-> ve.dm.Transaction
* Warning: Unknown type ve.dm.AnnotationSet
-> ve.AnnotationSet
* Warning: Unknown type false
-> boolean
* Warning: Unknown type ve.dm.AlienNode
ve.dm doesn't have a generic AlienNode like ve.ce
-> Unknown type ve.dm.AlienInlineNode|ve.dm.AlienBlockNode
* Warning: Unknown type ve.ve.Surface
-> ve.ce.Surface
* ve.example.lookupNode:
-> Last @param should be @return
* ve.dm.Transaction.prototype.pushReplace:
-> @param {Array] should be @param {Array}
* Warning: ve.BranchNode.js:27: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
* Warning: ve.LeafNode.js:21: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
Differences fixed:
* Variadic arguments are like @param {Type...} [name]
instead of @param {Type} [name...]
* Convert all file headers from /** to /*! because JSDuck tries
to parse all /** blocks and fails to parse with all sorts of
errors for "Global property", "Unnamed property", and
"Duplicate property".
Find: \/\*\*([^@]+)(@copyright)
Replace: /*!$1$2
* Indented blocks are considered code examples.
A few methods had documentation with numbered lists that were
indented, which have now been updated to not be intended.
* The free-form text descriptions are parsed with Markdown,
which requires lists to be separated from paragraphs by an
empty line.
And we should use `backticks` instead of {braces} for inline
code in text paragraphs.
* Doc blocks for classes and their constructor have to be
in the correct order (@constructor, @param, @return must be
before @class, @abstract, @extends etc.)
* `@extends Class` must not have Class {wrapped}
* @throws must start with a {Type}
* @example means something else. It is used for an inline demo
iframe, not code block. For that simply indent with spaces.
* @member means something else.
Non-function properties are marked with @property, not @member.
* To create a link to a class or member, in most cases the name
is enough to create a link. E.g. Foo, Foo.bar, Foo.bar#quux,
where a hash stands for "instance member", so Foo.bar#quux,
links to Foo.bar.prototype.quux (the is not supported, as
"prototype" is considered an implementation detail, it only
indexes class name and method name).
If the magic linker doesn't work for some case, the
verbose syntax is {@link #target label}.
* @property can't have sub-properties (nested @param and @return
values are supported, only @static @property can't be nested).
We only have one case of this, which can be worked around by
moving those in a new virtual class. The code is unaltered
(only moved down so that it isn't with the scope of the main
@class block). ve.dm.TransactionProcessor.processors.
New:
* @mixins: Classes mixed into the current class.
* @event: Events that can be emitted by a class. These are also
inherited by subclasses. (+ @param, @return and @preventable).
So ve.Node#event-attach is inherited to ve.dm.BreakNode,
just like @method is.
* @singleton: Plain objects such as ve, ve.dm, ve.ce were missing
documentation causing a tree error. Documented those as a
JSDuck singleton, which they but just weren't documented yet.
NB: Members of @singleton don't need @static (if present,
triggers a compiler warning).
* @chainable: Shorthand for "@return this". We were using
"@return {classname}" which is ambiguous (returns the same
instance or another instance?), @chainable is specifically
for "@return this". Creates proper labels in the generated
HTML pages.
Removed:
* @mixin: (not to be confused with @mixins). Not supported by
JSDuck. Every class is standalone anyway. Where needed marked
them @class + @abstract instead.
Change-Id: I6a7c9e8ee8f995731bc205d666167874eb2ebe23
This happens when the <span> is the start of unwrapped content. The
converter logic to look at the tag name in wrapping mode doesn't kick in
because we're not yet in wrapping mode at that point.
The core issue was that previously, we relied on the document
structure/state to choose between alienBlock and alienInline, and only
used the tag name where the document structure was ambiguous (wrapping).
Changed this to be the other way around: we now rely primarily on the
tag name, and if that doesn't match what we expect based on the document
structure, we work around that if possible. Specifically:
* inline tag in our wrapper --> inline alien
* block tag in our wrapper --> close wrapper, block alien
* inline tag in wrapper that's not ours --> inline alien
* block tag in wrapper that's not ours --> *inline* alien
* inline tag in structural location --> open wrapper, inline alien
* block tag in structural location --> block alien
* inline tag in content location --> inline alien
* block tag in content location --> *inline* alien
only in the fourth and the last case do we need to use the "wrong" alien type to
preserve document validity, and it will always be inline where block was
expected, which should reduce UI issues.
The condensed version of the above, which is used in the code, is:
* If in a non-wrapper content location, use inline
* If in a wrapper that's not ours, use inline
* Otherwise, decide based on tag name
* Open or close wrapper if needed
ve.dm.Converter:
* Replace isInline logic in createAlien() with the above
* Factor out code to start wrapping (was duplicated) into startWrapping()
* Call startWrapping() if createAlien() returns an alienInline and we're
in a structural location
Tests:
* Add test cases with aliens at the start and end of unwrapped content
** The first one failed prior to these changes and now passes, the
second one was already passing
* Fix about group test case, was exhibiting the bug that this commit fixes
Change-Id: I657aa0ff5bc2b57cd48ef8a99c8ca930936c03b8
Although $.toJSON optimises heavily for modern browsers (it
becomes a direct reference to JSON.stringify), we still load the
extra plugin.
JSON is specified as part of ECMAScript 5, but most browsers
supported this one before they supported the rest of ES5.
http://caniuse.com/#search=JSON
Cut off for native JSON is IE7, Firefox 3.0 (3.6 supports it) and
Safari 3. Not any of our concern as VE will most likely never
support those (certainly not at this point in time, and less
likely as time goes on).
Change-Id: I4e8f26ac94763fa38d29e41264de0247f53a21e5
I noticed this bug on [[List of Presidents of the United States]]. When
there's HTML that looks like "<td>Foo\n<meta/></td>", the converter will
collect the newline in wrappedWhitespace, then attempt to splice it out
and store it in internal data. But instead, it ends up splicing out the
/metaBlock element, which causes strange unbalanced input, which causes
an empty table in the node tree.
Change-Id: I79ed2fa9a834cc42759c7d21250d8842f563d38f
ve.Range
* Rewrote truncate so that it works as expected, truncation should always reduce the length using the start/end values, not the from/to values
ve.ui.Inspector
* Added a comment about where the name argument to onBeforeInspectorOpen comes from, since it's a little bit confusing on first read (and I wrote it!)
* Calling onInitialize, onOpen and onClose methods directly, since we need to control the before or after-ness of listeners getting in there and doing their stuff - plus it's more direct
* Removed onRemove stub, which is never actually called
* Added before/after versions of initialize, open and close events
* Got rid of recursion guard since we don't need it anymore thanks to changes made in ve.dm.Surface (see below)
ve.ui.Context
* Updated event names to deal with new before/after naming of initialize, open and close events
* Removed fade-in logic since fading in doesn't even work anymore - since now we now annotate first, then open the inspector, the menu will actually exist and be open when we open the inspector even though you don't see it because it's quickly obscured
ve.ui.LinkInspector
* Made fragments non-auto selecting, in the case of onInitialize we actually call select(), which is silly since we were using an auto-selecting fragment - it's clear that this was a mistake
ve.dm.Surface
* Moved locking (polling stop and start) to the far outside edges of the change method
* I need a lot of eyes and testing on this change, it seems OK to me, but I'm suspicious that it may have side effects
* What was happening is that selection changes were being applied and then the poll was picking them up, and then the selection was coming in again as a change, but it wasn't a change at all, it was just feedback - this change event was then closing the inspector the instant it was opened - the odd part was that this only occurred when you selected backwards, which seems to be caused by the range being normalized, so it looked like a new selection even though it wasn't
ve.dm.Document
* trimOuterSpace from Range didn't consider annotated spaces to be spaces, by using the [0] trick (first character of a plain text character string or first element in an annotated character's array both are the character's value - but elements don't have a property named '0' so it skips those safely as well) we can always get the right value for comparison
Change-Id: I0873d906c058203b83b8d4bbe5a4b274f05a26fd
ve.dm.Document
* 2 of the 3 paths of getSlice still returned arrays instead of ve.dm.DocumentSlice objects
ve.ce.Surface
* Translate the range using the insertion transaction and truncate it, so the cursor ends up just after the pasted content
Change-Id: If7bae5e254ec84a847c1d3527f74d9c09c2d82b4
