Changes:
- removed onExtensionRegistration and related TODOs
- introduced onUserGetDefaultOptions hook
Change-Id: I6648802c19d90df36a211d6494033aca30c078ca
* To speed the time the tests spend running
* To make them reliably execute and not depend on magic numbers
Additional changes:
* Use mw.now instead of Date on checkin.js
* Split big setVisibleTimeout test into several smaller ones
* Extract helpers for the tests
Change-Id: I9d3233fccf6de0997f968d096e375df996e87786
After the preview fade out animation has completed, then the preview
element should be removed from the DOM as it'll never be used again.
Supporting changes:
* Add the preview element to the DOM in ext.popups.Preview#show so that
it mirrors removing it from the DOM in #hide.
Change-Id: I6b3adc962aa13fbd46dce5f4c4f741299e43c6d9
While I1bf953b2 fixed the typo in FETCH_START_DELAY, it didn't do
anything to address the inconsistency in the time it takes to render a
preview (preview delay).
If the gateway result resolves before the target preview delay (500 ms)
is met, then delay dispatching the FETCH_END action until it is. If,
however, the gateway result resolves after the target preview delay,
then dispatch the FETCH_END action immediately.
Supporting changes:
* Expose the fetch action to ease testing it and to help tidy up the
mw.popups.actions.linkDwell tests.
Change-Id: Idf02343a0417cfbb33093a81d97ecebc5c1c7379
Test what mw.popups.haveCheckinActionsBeenSetup guards against so that
it doesn't have to be touched during the associated test.
Bug: T147314
Change-Id: I315e0782a0e3b1d04878f1ee6f538e54531f7df5
Use schema revision 16163887.
Add the 'checkin' action, which is accompanied by the 'checkin'
property. The action is logged at the following seconds
(Fibonacci numbers) after the page loads: 1, 2, 3, 5, 8, 13, 21,
34, 55, 89, 144, 233, 377, 610, 987, 1597, 2584, 4181, 6765.
The `checkin` property contains the values listed above.
Bug: T147314
Change-Id: Ib9ec7bd0e60aa34a04e32222b025347f6ee31794
Per #Design's mocks, the "Reading preferences" section should appear
immediately beneath the Skin section, if it's present.
Changes:
- onGetPreferences will try to inject PagePreviews option after
skin section or on the end of section when skin select is not available
- unit tests for new behaviour
Bug: T146889
Change-Id: Id14c0774aee917b7e949ab3ba5968a038b3ca933
Changes:
- added missing unit tests
- introduced PopupsContextTestWrapper, removed all unit-tests logic
from Hooks/Context classes
- removed getModule() from Popups.hooks.php, it's hooks responsibility
to keep single context instance
- removed class_exists calls, use ExtensionRegistry instead
- pass ExtensionRegistry as a dependency so it's easy to mock
- reach 100% code coverage
- introduce PoupsContext::isBetaOn() as it was used in many places
Change-Id: Id014efe72edf24628539c76968e53eb3e06709f4
...with the wikimedia presets.
For automatically fixing most of the JS lint problems run
grunt eslint:fix
Some rules of stylelint were disabled given they cause problems with
existing popups code (like no id selectors for example).
Change-Id: I2153047c3ddbea50572dd329989088bb20787515
Action changes:
* Update the BOOT action to include isEnabled and update the associated
tests.
Reducer changes:
* Make the preview and eventLogging reducers handle the BOOT action's
new shape.
Bug: T152687
Change-Id: I3fa2098269a32912eda99ceb8f13887688a14c15
The Page Previews A/B test was disabled in T144490. After the changes
for that task had been deployed we discovered that the old definition
for when previews are enabled was invalid.
Previews are enabled:
* If the beta feature is enabled and the user has enabled the beta
feature.
* The user hasn't disabled previews via the settings modal.
* And soon, if the beta feature is disabled and the user hasn't disabled
previews via their user preferences (see T146889).
Changes:
* mw.popups#createExperiment -> mw.popups#isEnabled
* Make mw.popups#isEnabled act like a factory to maintain backwards
compatibility.
* Update the associated tests.
Bug: T152687
Change-Id: I713a90dfb29866b27738e7d19e8a22518a12d417
When opening the settings dialog, the form didn't represent the current
enabled status of the application. This change makes sure that every
time the form is shown, the form state represents the current
application state.
If the application is enabled, then the 'simple' (Enabled) option is
selected on the form. If it is disabled then if there's Navigation
popups, it selects 'advanced' (Advanced popups), if there are not, it
selects 'off' (Disabled).
Changes:
* Change listeners
* Set the form state every time the form is going to be shown
* Update tests
* Supporting changes
* Add settingsDialog#setEnabled which updates the DOM form based on the
enabled flag and the navpops state
* Extract isNavPopupsEnabled function in settingsDialog.js to be used in the
form creation and also when setting the form enabled state
* Add test verifying changeListeners#settings shows and sets enabled state
properly when showing the dialog more than one time
Change-Id: Ic660f48d9a78e47c09a192ab86681196d2e01d61
Changes:
* Generalized previewCount change listener to syncUserSettings
* Added state.preview.enabled to be saved on change
Change-Id: I403a490fee9c8e125175996ba30c63c232b5598b
This changes introduces new option on Special:Preferences page that
allows users to enable/disable Page Previews feature.
By default feature is disabled. Temporarily option in Preferences
page is smoke and mirrors as switching logic is still WIP.
Bug: T146889
Change-Id: Ifdd17ce265d2d4c7583433ed4991443c563f1fe3
The save action has been implemented, and it is listened to by the
canonical enabled state in the previews reducer, and by the settings
reducer to perform UI changes.
The enabled state of the application has been kept in the preview
reducer as the canonical source of truth. See supporting changes for
documentation about the decision.
Actions:
* Introduce new action SETTINGS_CHANGE with the enabled status
* Trigger that action when clicking Save in the settings dialog
Reducers:
* Listen to SETTINGS_CHANGE in the preview reducer to update enabled
status
* On the settings reducer
* Handle the SETTINGS_CHANGE action
* Add showHelp flag to determine if the help should be showing
Change listeners:
* Switch to compare past vs present changes in the implementation
* Handle showing and hiding the help
Supporting changes:
* On the rendered settings dialog:
* Change #hide to actually just hide and remove legacy if statement
* Add #toggleHelp method to show or hide the help dialog
* Add doc/adr/0003-keep-enabled-state-only-in-preview-reducer.md to
support the decision of making the saveSettings action creator return
a Redux.Thunk and keeping the enabled state just in the preview
reducer.
* Add NB to actions#saveSettings explaining and linking to the
document
Follow commits soon:
* Persist the settings change to local storage when it changes, and
unify with the preview change listener
Change-Id: I80dc5f29fbe6286f2e3e3b50d909894bc5041ccd
Reducer changes:
* Break the mw.popups.reducers.rootReducer test into @@INIT tests
for each reducer as there's shouldn't be any need to test that a
framework works as documented.
Changes:
* Move the mw.popups.reducers#preview, #eventLogging, and #settings
reducers into their own files in resources/ext.popups/reducers/.
* Make the associated tests mirror the new layout.
* Move the initialization of the mw.popups.reducers namespace into its
own file.
* Remove the mw.popups.rootReducer property in favour of a simple
private factory function per the reducer change above.
Change-Id: I94229d9ef1985f3806eec44c2e8234a5bbddc94f
High-level acceptance tests shouldn't expose low-level concepts such as
the Resource Loader ("RL"). Merge the "And the RL module has loaded"
step into the "Given I am on the test page" step as they are only ever
used together.
Changes:
* Use the ArticlePage#wait_until_rl_module_ready helper method provided
by mediawiki_selenium@1.7.3.
* Update and include the Gemfile.lock.
Change-Id: Ic81eae5dc0caa8ec51c91b21aef544f52d8c49e1
Merge the "Given the test page has been created" and "Given I am on the
... page" as they are only ever used together to mean "Given I am on the
test page".
Supporting changes:
* samples/links.wikitext -> fixtures/test_page.wikitext as it's more
obvious what the file is.
Change-Id: Ide261a8e8c55133ab2a13a80c48e266252f61f5f
Changes:
* Rename the somewhat awkwardly named "popups_core" Cucumber feature and
its accompanying step definitions to "previews".
* Remove as many references to Popups and HoverCards as possible.
* Use language consistent with the QUnit unit and integration tests and
documentation, e.g. the user dwells on a link.
* Remove settings-related step definitions from the previews step
definitions.
Change-Id: Ibc0d07e8394aeb640f9efaabfe10be5317bf4b8c
Now when on a hovercard and clicking the cog, it should show the hovercards
settings menu.
Additional changes:
* Change the changeListener/settings to create and attach the DOM element
just once to the DOM
Change-Id: Id685ddcda9532528fc62b383539788f785089ef0
