While I1bf953b2 fixed the typo in FETCH_START_DELAY, it didn't do
anything to address the inconsistency in the time it takes to render a
preview (preview delay).
If the gateway result resolves before the target preview delay (500 ms)
is met, then delay dispatching the FETCH_END action until it is. If,
however, the gateway result resolves after the target preview delay,
then dispatch the FETCH_END action immediately.
Supporting changes:
* Expose the fetch action to ease testing it and to help tidy up the
mw.popups.actions.linkDwell tests.
Change-Id: Idf02343a0417cfbb33093a81d97ecebc5c1c7379
Use schema revision 16163887.
Add the 'checkin' action, which is accompanied by the 'checkin'
property. The action is logged at the following seconds
(Fibonacci numbers) after the page loads: 1, 2, 3, 5, 8, 13, 21,
34, 55, 89, 144, 233, 377, 610, 987, 1597, 2584, 4181, 6765.
The `checkin` property contains the values listed above.
Bug: T147314
Change-Id: Ib9ec7bd0e60aa34a04e32222b025347f6ee31794
...with the wikimedia presets.
For automatically fixing most of the JS lint problems run
grunt eslint:fix
Some rules of stylelint were disabled given they cause problems with
existing popups code (like no id selectors for example).
Change-Id: I2153047c3ddbea50572dd329989088bb20787515
Action changes:
* Update the BOOT action to include isEnabled and update the associated
tests.
Reducer changes:
* Make the preview and eventLogging reducers handle the BOOT action's
new shape.
Bug: T152687
Change-Id: I3fa2098269a32912eda99ceb8f13887688a14c15
The save action has been implemented, and it is listened to by the
canonical enabled state in the previews reducer, and by the settings
reducer to perform UI changes.
The enabled state of the application has been kept in the preview
reducer as the canonical source of truth. See supporting changes for
documentation about the decision.
Actions:
* Introduce new action SETTINGS_CHANGE with the enabled status
* Trigger that action when clicking Save in the settings dialog
Reducers:
* Listen to SETTINGS_CHANGE in the preview reducer to update enabled
status
* On the settings reducer
* Handle the SETTINGS_CHANGE action
* Add showHelp flag to determine if the help should be showing
Change listeners:
* Switch to compare past vs present changes in the implementation
* Handle showing and hiding the help
Supporting changes:
* On the rendered settings dialog:
* Change #hide to actually just hide and remove legacy if statement
* Add #toggleHelp method to show or hide the help dialog
* Add doc/adr/0003-keep-enabled-state-only-in-preview-reducer.md to
support the decision of making the saveSettings action creator return
a Redux.Thunk and keeping the enabled state just in the preview
reducer.
* Add NB to actions#saveSettings explaining and linking to the
document
Follow commits soon:
* Persist the settings change to local storage when it changes, and
unify with the preview change listener
Change-Id: I80dc5f29fbe6286f2e3e3b50d909894bc5041ccd
* Port ext.popups.desktop/ext.popups.settings.js to settingsDialog.js
* Blank tests for now. Needs Qunit integration tests.
* Transform into a factory function for future testing.
* Saving functionality is commented out, will be removed when immplemented in
the actions
* Add new incomplete action saveSettings
* Will perform the saveSettings async tasks and then trigger enabling or
disabling popups.
* Rename action settingsDialogClosed to hideSettings for consistency
Change-Id: I3936d3a4bc476de16d76025139be09f1798796c4
Action changes:
* Mix in timing information into actions that are likely to need it:
LINK_DWELL, {LINK,PREVIEW}_ABANDON_START, LINK_CLICK, and
PREVIEW_CLICK.
* Generate and include an unique token in the LINK_CLICK action.
Reducer changes:
* Make the eventLogging reducer:
* Handle the LINK_CLICK action's new shape.
* Start (create) and maintain a model of the user interacting with a
link.
Bug: T152225
Change-Id: I671b12432ba2f7a93bf81043adb57ac30a4c38c3
Action changes:
* Add the PREVIEW_SHOW action.
Reducer changes:
* Increment the user's preview count in the eventLogging reducer.
Changes:
* Dispatch the PREVIEW_SHOW action when the preview has been shown.
* Add the previewCount change listener, which is responsible for
persisting the user's preview count to storage when it changes.
* Call the change listener factories individually in
#registerChangeListeners as their signatures aren't consistent.
Bug: T152225
Change-Id: Ifb493c5bff66712a25614ebb905251e43375420a
Action changes:
* Include the user's preview count in the user property of the action.
Reducer changes:
* Make the eventLogging reducer add the bucketed user's preview count to
the state tree.
Changes:
* Extract mw.popups.UserSettings#getPreviewCount and #setPreviewCount
and associated tests from the ext.popups.core module.
Bug: T152225
Change-Id: I6b7afef31311be8fede685deb536f577845cb9cf
Action changes:
* Group user-related data in the user property, rather than repeating
"isUser" and "user" prefixes.
* Include user's edit count in the user property of the action.
Reducer changes:
* Make the preview reducer handle the action's new shape.
* Make the eventLogging reducer add the bucketed user's edit count to
the state tree.
Bug: T152225
Change-Id: I8fae9e2d0f6889ffdd30bb5192513d194f791967
Action changes:
* Include whether the user is logged in/out and information about the
current page in the BOOT action.
* Add the EVENT_LOGGED action, which represents the eventLoggined change
listener logging the queued event.
Reducer changes:
* Move all tokens and timing information from the preview reducer to the
eventLogging reducer.
* Make the eventLogging reducer reset the state.
Changes:
* Add the mw.popups.createSchema function, which constructs an instance
of the mw.eventLog.Schema object that can be used to log Popups
events.
* Add the eventLogging change listener, which logs the queued event.
* Add hand-crafted, artisanal documentation.
Bug: T152225
Change-Id: I8a3f58358b211cc55417dcda7e796fe538e3d910
This reverts commit 047bccfac1.
It created merge conflicts with a bunch of patches that were days old and about to be merged. Instead of rebasing 10 patches, let's revert this one, finish merging the other ones and just rebase and fix this one. I'll re-introduce the patch in a bit.
Change-Id: Ib495755b0ab4bfa5fdf5590b1271792862a47d4b
Action creator changes:
* Make the linkAbandon action creator asynchronous by splitting it into
two distinct actions, LINK_ABANDON_START and _END, the latter of which
is dispatched after a 300 ms delay.
* Introduce the previewDwell and previewAbandon action creators. The
latter is an asynchronous action that mirrors the linkAbandon action.
Reducer changes:
* Make the LINK_DWELL, LINK_ABANDON_END, and PREVIEW_ABANDON_END action
hide a preview, if one has been shown.
* Make the LINK_ABANDON_END action NOOP if:
* The user has interacted with another link, or
* The user is interacting with the preview.
Supporting changes:
* Update the mw.popups.reducers#preview and #renderer unit tests to use
an empty previous state so that the tests are more resilient to
modifications of the state tree.
Change-Id: I2ecf575bbb59bb64772f75da9b5a29c071b46a8d
If the user abandons the link after the API request delay (500 ms) but
before the it resolves (~10e3 ms), then the preview shouldn't be
rendered.
Changes:
* actions: Include the link in the FETCH_START, FETCH_FAILED, and
FETCH_END actions.
* reducers: If the active link has changed, then FETCH_END is a NOOP.
Supporting changes:
* reducers: Signal that a preview should be rendered and shown with
preview.shouldShow.
Change-Id: I3dd1c0c566ec63de515174c14845d7927583ce93
The QUnit test suite now completes in ~10e2 ms rather than ~10e3 ms.
Changes:
* Make mw.popups.actions#linkDwell to use mw.popups.wait.
* Make the tests for mw.popups.actions#linkDwell complete faster, but
still asynchronously, by stubbing mw.popups.wait.
Change-Id: I5cbef0ea69bc860f75cac27c1adea3d419c1ffad
Extract core rendering functionality from the mw.popups.renderer and
mw.popups.renderer.article objects.
For now, render and show the preview when the user dwells on and
abandons a link respectively.
Supporting changes:
* Add mw.popups.wait, which is sugar around window.setTimeout.
* action.response -> action.result in the FETCH_END case of the preview
reducer.
Change-Id: I14b437e7c2f55b988837fcb2800dd61a23c29a01
If the user has abandoned the link or dwelled on a different link, then
don't make the API request.
Changes:
* Fix a bug in the linkDwell reducer where the activeLink was always
being set to undefined.
* Add the private fetch action creator.
* Make the linkDwell action dispatch the result of the fetch action
creator after 500ms.
Supporting changes:
* Make the link* action creators take DOM elements rather than jQuery
instances so that:
1. Testing whether the state tree has changed is an identity
comparison.
2. jQuery instances are constructed only when required.
* Document the ext.popups.Gateway type.
* Document the Redux.Store type.
* Rename the "previews-page-title" data attribute to
"page-previews-title" to avoid confusion.
Change-Id: I0b1cf3337a6f8d6450ad2bd127cb292ebb73af4f
Supporting changes:
* Add mw.popups.registerChangeListener, which registers a change
listener that will only be called when the state in the store has
changed.
Change-Id: Ibe6934058327c7f02f7d8092e74a667a5a1c600a
Changes:
* Add sessionToken and pageToken properties to the BOOT action and
update the preview reducer.
Supporting changes:
* Move the mw.popups.createActions to ext.popups/boot.js so that Redux
is used in one file and the actions can be tested in isolation more
easily.
Change-Id: Icd61bf1aeb466899e047432bf9798e2574652830
Reducers as a whole are a WIP, but this implements a baseline from which
to add more.
Changes:
* Create ext.popups.reducers to house all reducers
* Create reducers for preview and renderer state manipulation
* Create rootReducer by combining preview and renderer reducers
* Add QUnit tests for reducers
* Move action types into ext.popups.actionTypes
* Extract rootReducer from boot.js
Change-Id: I8a2296c6846cd4b0552a485e671af1d974944195
Changes:
* Make grunt:qunit run all QUnit tests in those modules whose names
being with "ext.popups".
* Add ext.popups/index.js, which initialises the mw.popups namespace.
* Add ext.popups/userSettings.js, which contains the code that deals
with interacting with the User Agent's storage.
* Add ext.popups/experiment.js, which contains the code that that
decides whether or not the user is in the experiment condition.
* Add tests for both units, converting existing tests where appropriate.
* Remove the associated code from ext.popups.core/ext.popups.core.js.
* Finally, dispatch the BOOT action against the store in
ext.popups/boot.js.
Change-Id: I697207677304bd49c7cfe1d37bb0a4af7810f387
