The isModuleRegistered() method was introduced a few years ago,
when the load order in ResourceLoader was undergoing a change.
It used to be that hooks like were run first to register modules, and then
wgResourceModules was registered afterwards. This was reversed to disallow
mutating the config at run-time from foreign modules and to allow better
caching and error detection.
It's been several years since then, so this redundant check is no longer
needed. ServiceWiring.php in MW core for ResourceLoader always processes
config and extension.json first before this hook is called.
Bug: T247265
Change-Id: I466f1fa70b8f0e9fe5e8e8df90bb0001b3329b87
Html5 fragment mode now bans whitespace per html5 spec
See Ie2b7c9429691e2c491c3359d5b400d8f078aa789
Change-Id: Ie6fa40798f06a358f6082110b4d8cc0028c80321
This patch is mostly moving code around without changing the behavior.
Exceptions:
* The ErrorReporter creates a <span> container. This was previously
parsed. The only benefit might be error checking and escaping. Rather
pointless. The code just created this HTML. With this patch, it is not
parsed any more. The unit test reflects this change. The output in
production will not change, as the parser tests show.
* Parsing of the message key (to detect it's type and id) is simplified
a lot, using explode. With this the code can, in theory, support more
types.
Bug: T239572
Change-Id: If2fe5f55db46dfc7e0ce445348608bef00bec64e
Perform the validation in validateRef, and display a new error message for
broken "follow" refs. This changes existing behavior, where broken folow
ref content is arbitrarily displayed at the top of the references list and
no error is rendered.
Thanks to weasely wording, the new error can later be reused for "extends"
errors.
Bug: T240858
Change-Id: I506e4dcd1151671f5302ecd99581145d979d8124
This exception was introduced very late in the patch I38c9929. It
already caused trouble. This here is essentially a revert. It restores
the previous behavior where this edge-case was silently ignored. The
worst thing that can happen is that appendText() creates an incomplete
entry in the $this->refs array, which will be rendered at the end. The
user can see it then.
As of now we are not aware of a code path where this would even be
possible. Still this does make the code *more* robust by not making it
explode, but give the user something they can work with.
Bug: T243221
Change-Id: I2e2d29bbd557090981903fcc2ece8796fafa4aa4
This resolves another TODO. Since this is an intentional limitation in
the design of the feature, I find it pretty signigicant to give it it's
own error message.
Note that the text does not need to be perfect, just good enough for now.
We will review all error messages later via T238188.
Bug: T242141
Change-Id: Id9c863061e855350320131e81f6702c8810736f4
… if possible. In most cases it's possible to use the real object, and
reach into it's private parts via TestingAccessWrapper. This is almost
the same as using a mock, but I feel it's much more "light-weight".
The main change is that there is no strict assertion any more for the
number of ReferenceStack::pushInvalidRef() calls. Before this was mixed
into the same array as the valid references, as elements set to "false".
I think the test is as valueable as before without this extra check. If
the rollback stack works or not is already covered by other tests.
Change-Id: I90213557b164b3e43233a3dc393ee3f3d3d556a9
Allow a ref with `name=""` for backwards-compatibility.
Partially reverts I07738cce2641026dfaa92ba263ed6f9834be0944
Bug: T242437
Change-Id: Iaed2d1c41be377a4961aff39838b0965f6c00616
The difference between the two is that isOK() only reports "fatals",
while isGood() also reports "warnings" and "errors". I believe we
*want* to report all of these the same way.
Change-Id: I3be832c5db7aba3c03bd2ad8cfbba42362c093fd
A fun edge case where `name=""` fools both validation branches after
a references rollback, and triggered a LogicException. Stop these
freak refs.
Bug: T242437
Change-Id: I07738cce2641026dfaa92ba263ed6f9834be0944
* Always have an empty line between @param and @return to improve
readability as well as consistency within this codebase (before, both
styles have been used).
* Flip parameter order in validateRefInReferences() for consistency with
the rest of the code.
* In Cite::guardedRef() the Parser was now the 1st parameter. I changed
all related functions the same way to make the code less surprising.
* Same in CiteUnitTest. This is really just the @dataProvider. But I feel
it's still helpful to have the arguments in the same order everywhere, if
possible.
* Add a few strict type hints.
* It seems the preferred style for PHP7 return types is `… ) : string {`
with a space before the `:`. There is currently no PHPCS sniff for this.
However, I think this codebase should be consistent, one way or the other.
Change-Id: I91d232be727afd26ff20526ab4ef63aa5ba6bacf
The rollback feature was not able to properly restore a __placeholder__.
That's why a specific use case was behaving different. This already
worked just fine:
<ref extends="a">…</ref>
<references>
<ref name="a">…</ref>
</references>
But this didn't, even if it is the exact same from the users
perspective:
<ref extends="a">…</ref>
{{#tag:references|
<ref name="a">…</ref>
}}
Bug: T239810
Change-Id: I163a1bffb9450a9e7f776e32e66fb08d0452cdb9
One of the most significant changes is when I noticed that the $group
can never be null. We set it to DEFAULT_GROUP before. That's an empty
string.
I'm not very happy with the two @phan-suppress-next-line. Is there a
better way to fix these lines?
Change-Id: I33c1681e2f3857cb6701da71f4ed8893caff4d1e
I hope this is more readable. This patch does two things: It uses
array keys to name all elements in the data provider. (Note these
array keys don't actually do anything, PHPUnit ignores them.) And this
patch merges two parameters into a single $expectedResult.
Change-Id: Ib7adc32bf8bfd523735591d35d0bcabd3b853cfc
Since I3db5175 the ParserCloned hook handler does not rely on cloning
the Cite object any more. There is no cloning any more. This is dead
code and we could remove it. Just to be sure I propose to keep the
method, but let it throw an exception.
Bug: T240248
Change-Id: I2057ea652ca25f4c7031c28a6e713671738f5e22
These should be impossible conditions, we don't want to continue with
processing.
I hate this patch, it's a temporary workaround until someone rewrites
or replaces the rollback logic, for example with a two-pass parse.
Change-Id: I6a1327e397d4272fa412c3f290c2107d867d2854
I hope this patch is not to horrifying and can be reviewed. It's
possible to split this into a sequence of smaller patches. Please
tell me.
Change-Id: I4797fcd5612fcffb0df6c29ff575dd05f278bd4d
The main benefit is this nifty call: `$this->rollbackRef( ...$call )`
To make this possible, the minimal change I needed to do was to move
the two $argv and $text arguments to the end.
I also tried to order all other arguments as good as I could: Required
first, optional later. Group and name together. Name and extends
together.
All this is private implementation and should not affect anything.
Change-Id: I7af7636c465769aa53122eb40d964eabdd1289ba
I feel this is a little better than before. It looks like we never need
to *replace* a text that existed before.
This depends on I4a156aa which fixes one of the last remaining trimming
issues. Outside of <references>, a <ref> </ref> with no other content
but some whitespace was already forbidden. But not inside of <references>.
This is relevant for appendText(). It should not be called with null, but
was because of the inconsistent behavior.
Change-Id: I38c9929f2fa6e69482e45919e2f8dbf823cb1c8b
Note that this patch changes behavior, an invalid "dir" will result in
a cite reference at the point where the <ref> is declared rather than
in the references section. This is consistent with other errors.
Bug: T15673
Change-Id: Id10db40aa0b391f2f1d9274aa09d22a7278d65e3
The name of the base class in tests is guaranteed to only occur a
single time in a file. There is not much value in making it relative,
and requiring it to appear in the use section. Especially because it
is in the root namespace.
This reflects what I once encoded in the sniff
https://github.com/wmde/WikibaseCodeSniffer/blob/master/Wikibase/Sniffs/Namespaces/FullQualifiedClassNameSniff.php
I wish we could pick this rule and use it in our codebases. But it
seems it is to specific and can't be applied on all codebases, hence
it can't become part of the upstream MediaWiki rule set. At least not
at the moment.
Change-Id: I77c2490c565b7a468c5c944301fc684d20206ec4
* Use the Html class to safely create HTML code.
* $this->referenceStack can not be null any more.
* $this->inReferencesGroup is not needed during output, only when
parsing tags.
* Replace ReferencesStack::getGroupRefs() as well as deleteGroup()
with a combined popGroup() that does both things.
* Extract the code responsible for the "responsive" behavior to a
separate function.
* Some TestingAccessWrapper are not needed.
Change-Id: Ie1cf2533d7417ae2f6647664ff1145e37b814a39
Finishes breaking the circular reference between Cite and Parser.
This patch also demonstrates how evil it is to allow the error reporter
to be called from anywhere, and have side-effects. At least it's explicit
now.
Also fixes a bug where the inner error message would not be in the
interface language.
Bug: T240431
Change-Id: Ic3325cafb503e78295d72231ac6da5c121402def
This begins our journey of breaking the circular reference between
Cite and Parser. In later patches the child objects will also take
Parser as a parameter.
Bug: T240431
Change-Id: Ic672bb4bae19ac5f1e1f5817de171d76b3bd8786
Only create a Cite object if we need one. Never clearState, just
destroy and recreate later.
This makes it less likely that we leak state between parsers, and
saves memory and processing on pages without references.
It's also preparation to decouple Cite logic from state.
Change-Id: I3db517591f4131c23151c76c223af7419cc00ae9
* All classes are in a Cite\ namespace now. No need to repeat the word
"Cite" all over the place.
* The "key formatter" is more an ID or anchor formatter. The strings it
returns are all used in id="…" attributes, as well as in href="#…" links
to jump to these IDs.
* This patch also removes quite a bunch of callbacks from tests that
don't need to be callbacks.
* I'm also replacing all json_encode().
* To make the test code more readable, I shorten a bunch of variable
names to e.g. $msg. The fact they are mocks is still relevant, and still
visible because these variable names are only used in very short scopes.
Change-Id: I2bd7c731efd815bcdc5d33bccb0c8e280d55bd06
We are *so* close to 90%.
This patch should raise the coverage for the CiteDataModule to 100%.
I'm also adding a pure unit test for the clone() behavior. Note the
later is already covered by the CiteDbTest.
Question: Do we want the CiteDbTest to @cover anything?
Change-Id: I40763d01e18991f509bc30b6655aa57b23412fd9
Fixes a bug introduced in Icf61c9a27fd, which would cause a parser
cache split any time the Cite extension was initialized. The
`setLanguage` interface is regrettable, but I'm hoping it will only
be around temporarily.
Converts an integration test into a unit test and completes coverage.
Bug: T239988
Change-Id: I4b1f8909700845c9fa0cbc1a3de50ee7d42f69a5
Because that is what it does. Note our method is different from the one
in the Language class. We only accept strings.
Change-Id: I39107e837cc29f2d7c8867c1e602aa643f9e1a57
This class renders a <references> tag and everything inside. The
previous name sounds like it is responsible for rendering the contents
of a <ref>…</ref> tag. I mean, the class contains a method that does
exactly this. But this method is private.
Change-Id: I1cd06c9a11e0a74104f2874a34efa3e0843a0f70
This adds a test for numbers like "1.2.0" that appear when an extended
reference (e.g. "1.2.") is reused multiple times.
The first separator is from the extended reference. We decided to never
localize it. However, the second seperator is from reusing a reference.
This was always localized. We believe this is a bug, but haven't fixed
it yet.
The test is documenting the status quo "1.2,0" with a comma. This kind
of makes sense, one could argue, because the "1.2" appears like this up
in the text, but the ",0" is a different indicator for a reuse, which
*never* occurs in the text.
Change-Id: Ie3d26bcadd8929b906bfbcac4806af2150d61f2a
This partly reverts Ied2e3f5. I haven't properly tested this before.
Rendering a bad extends (that extends a <ref> that's already extended)
not indented messes the order up and rips other extended <ref>s out of
context.
For now it might be better to stick to the previous, "magic" behavior:
Such an extends behaves like it is extending the *parent*, and is
ordered and indented as such. This is still not correct, but I feel
this is much better than rendering such a bad extends on the top level.
This patch also makes the code fail much earlier for a nested extends,
if this decision can be made already. In this case the error message is
rendered in the middle of the text (as other errors also are), not in
the <references> section.
Change-Id: I33c6a763cd6c11df09d10dfab73f955ed15e9d36
This partly reverts Id7a4036e64920acdeccb4dfcf6bef31d0e5657ab.
The message "cite_section_preview_references" says "Preview of references".
This line is not meant to be part of the content, but an interface message.
It should use the users (interface) language, not the content language.
Change-Id: I1b1b5106266606eb0dfaa31f4abd3cee9ba92e8c
We never access Language directly, so proxy its method instead of
returning the full object.
I believe I've found a bug, but not fixing here: the footnote body
numeric backlinks like "2.1" behave as if they were decimals rather
than two numbers stuck together with a dot. So they are localized
to "2,1".
Bug: T239725
Change-Id: If386bf96d48cb95c0a287a02bedfe984941efe30
This is a mess of a function, and the tests show it. There are lots
of side-effects and context-sensitivity, which can be addressed in
later work. The interface with ReferenceStack is too wide.
Change-Id: I00cab2a555b2a9efd32d937979cd722d43ac1005
I was able to track this code down to I093d85d from 2012, which was done
right after the ParserAfterParse hook was introduced. I believe the
redundant code path was left to keep the Cite extension compatible with
old MediaWiki versions that did not had this hook yet.
I also noticed this code path is most probably entirely redundant with
the current version of MediaWiki. The *only* thing this code does is
blocking the ParserBeforeTidy hook from doing the same thing a second
time if the ParserAfterParse hook was called before. But it does *not*
block any other compination, e.g. if the two hooks are called the other
way around, or the same hook twice.
In core, it looks like it is impossible for the ParserBeforeTidy hook
being fired without the ParserAfterParse hook being fired before. If this
is true, this is in fact dead code.
Change-Id: Iacf8b600c7abdeaf89c22c2fc31e646f57245e47
If `extends` is encountered before the parent ref, we reserve the
sequence number and leave a placeholder to record the link between
ref name and number. This is necessary to render a list like,
"[1] [2.1] [2]", or to use subreferencing when the parent ref is
declared in the references tag.
When a placeholder is encountered during references section rendering,
it means that the parent was never declared.
Change-Id: I611cd1d73f775908926a803fae90d039ce122ab6
Pass the full ref structure from ReferenceStack to FootnoteMarkFormatter,
to give it control over the final rendering. This is aligned with how
the FootnoteBodyFormatter directly scans over groupRefs.
Change-Id: I3294fd9366f01daa4250a5d481f4adbae84c72b1
This was carrying the entire footnote marker, but subreferences need
to extract just the first (group ref sequence) part. Storing number
and extendsIndex in two separate fields gives us more flexibility
during rendering, for example these might use two different symbol sets.
Change-Id: I75bd6644c336036f9e84ba91e1c35e05bc1ca7f3
Validation blocks (name==null && text==null), so it should not be a
test case. Give the text a non-null value.
Also adds a check for missing test data.
Change-Id: I0f02206e2221805f5a2f8eaa163ed237cfb8d777
This patch does two things:
* Add strict PHP 7 type hints to most code.
* Narrow the interface of the checkRefsNoReferences() method to not
require a ParserOptions object any more.
Change-Id: I91c6a2d9b76915d7677a3f735ee8e054c898fcc5
There was a call in the API that was *not* using normalizeKey(). Now
that the API is gone, we can inline this.
This patch also contains a bunch of cleanups that might already been
resolved in the previous patches.
Change-Id: Id3767b5830268c8cfe9c10efabfa4a31e9dafeb8
Forked from Icd933fc983.
Bugs and unimplemented features are documented as TODOs in the parser test
fixtures.
Bug: T237241
Change-Id: I9427e025ea0bcf2fa24fd539a775429cc64767cc
This API was never used in Wikimedia production, and would have caused
performance problems. Removing the dead code will simplify our refactoring.
Bug: T238195
Change-Id: I7088f257ec034c0d089e0abdaa5a739910598300
We realized the trim() are not needed. This does not leave much behind
in the existing refArg() method, except that it checks for unknown keys.
I tried a few strategies and ended using the pretty new possibility to
have keys in list(), as well as use [] instead of list(). Both is
supported since PHP 7.1.
Change-Id: I569bfa14e68b64402519bd39022c197553881dde
We noticed the group="…" attribute was the only one that was not
trimmed. Does this mean it was possible to have two groups "a" and
" a"? It turns out: no. This was never possible because the parser
already trims all attributes before calling this code.
I tried to come up with the worst possible test case, but it succeeds,
even with very old versions of this codebase.
I suggest to remove the extra trimming from this codebase and rely on
what the parser provides.
Note the content is special and *not* trimmed by default.
Change-Id: Idff015447d7156ba7b5c03a5c423f199a71349f2
These exist two times, one time in the unit/ folder as a unit test, and
another time in the parent folder as an integration test. This confused
me already several times.
Change-Id: I147b8af8a7edba2582496468b4878faecc6d8110
Functional changes:
* hasGroup() will return false when a group exists, but is empty. This
is in line with what other methods like getGroups() already do.
Shouldn't have any effect on the existing code, but feels more clean
and consistent.
* getGroupRefs() won't fail any more when asked for an unknown group.
Tests:
* Add missing @covers for the constructor.
* Simplify test setup by always returning a spy. All tests need it
anyway.
* Cover 3 more methods.
Change-Id: Ie93e9af6258b757d842b30b0b059344733aad434
That was annoying me. Since we're passing a bare list, alphabetical
order helps make the code and tests readable.
Change-Id: I6384094e429e0e2a6fa810fdc28ae0643a0ccf7c
Most of this state is used to manage interactions with other state,
and encapsulation allows us to hide data structures and access behind
self-explanatory function names.
The interface is still much wider than I'd like, but it can be improved in
future work.
There is one small behavior change in here: in the `follows` edge case
demonstrated by I3bdf26fd14, we prepend if the splice point cannot be
used because it has a non-numeric key. I believe this was the original
intention of the logic, and is how the numeric case behaves. I've verified
that when array_splice throws a warning about non-numeric key, it fails to
add anything to the original array, so the broken follows ref disappeared.
Bug: T237241
Change-Id: I091a0b71ee9aa78e841c2e328018e886a7217715
* This fixes the refArg() function. If there is nothing wrong with the
follow="…" attribute, it should not return null.
* However, *everything* is false if an unknown error (e.g. an unknown
attribute) occurs.
* A trivial check for `if ( $follow )` is fine because all keys are
guaranteed to not be the string "0".
Change-Id: Ia4e37781e01db1ee6615ffc30bb68e47023c6634
… and make the error message for bad dir="…" shorter and more to the
point.
Now I understand why the error reporting was not done when $text was
empty: the error was actually appended to $text, which messes with
everything else that also works with the $text variable! This even
includes the API. This error message was exposed via the API. That was
certainly a bug.
With this patch, all error checking for the dir="…" attribute is now
done way down, when rendering the <references> section.
Note this also fixes a bug where the dir="…" was *not* rendered when
previewing a section.
Change-Id: I4ab0cb510973ed879c606bfaa394aacc91129854
This fixes a whole bunch of inconsistencies:
* The dir attribute is now trimmed, as most others already are. This is
an actual user-facing change.
* The internal representation is now false in case the value was invalid,
not an empty string any more.
* Null means the attribute was not present. This is now always used,
even in the return values that are meant to represent an error state. No
existing behavior changes.
* The internal representation does not contain an HTML snippet any more,
but the raw value "ltr" or "rtl", or null. Note this might influence the
API, because the API actually exposes the internal representation.
However, we are pretty sure the API is not used anywhere. Even if,
exposing HTML code was most certainly an unwanted and unexpected effect
of the patch that introduced the dir attribute. This does make this a
bugfix, I would argue.
Change-Id: Ic385d9ab36fa0545c374d3d63063028ae4e449d4
This patch does intentionally not touch any file name. Some of the
file names are a little weird now, e.g. \Cite\Cite. These can more
easily be renamed in later patches.
I used https://codesearch.wmflabs.org/search/?q=new%20Cite%5C( and it
looks like this code is not used anywhere else.
Change-Id: I5f93a224e9cacf45b7a0d68c216a78723364dd96
Note this codebase appears to be dual-licensed. Some files mention MIT,
but extension.json and some other files mention GPL.
Since WMDE typically uses GPL, I will continue to mark the files we
created as such.
Change-Id: I126da10f7fb13a6d4c99e96e72d024b2e5ecee06
The main motivation here is to cover the fallback code that was moved
in I20c814d. At some point we might touch this code again.
Bug: T238194
Change-Id: I0ab8a34b09790f42b10376eb3730c3b3c4ef53d2
1. Most existing CiteTests can be unit tests. They run so much faster
this way.
2. I modified some test cases to cover all trim() in the code.
3. The strict type hint in CiteHooks is removed because the parameter
is not used. Having a hard type hint for what is effectively dead code
makes the code more brittle for changes done outside of this codebase.
Change-Id: I1bff1d6e02d9ef17d5e6b66aeec3ee42bba99cf4
This fixes a series of issues:
* There is nothing about a "frame" in the Cite class any more.
* There is no addModules() call in the Cite class any more.
Change-Id: I20c814d46c26825c5c07eab0a5586de3a531eee7
To be honest I don't get why this lazy registration was done in the
first place. None of the 4 other hooks should ever be called before
the ParserFirstCallInit hook got called.
Also, under which circumstances can the ParserFirstCallInit hook be
called more than once?
Both scenarios would be wrong, as far as I'm concerned. Either I'm
missing something, or this code can indeed be simplified. Maybe it was
something to make it more compatible with older MediaWiki versions?
The only reason I can think of is: in all situations that do not
involve a parser, having the 4 extra hooks registered is pointless.
Does this waste space and/or runtime in the $wgHooks registry?
Change-Id: I5ef1495f4ce7bce940fa5f8e700af3d2c4851a01
