ve.ui.Inspector
* Removed disabled state and interfaces - this isn't needed
* Renamed prepareSelection to onInitialize
* Using event emitter to run onInitialize, onOpen and onClose methods
* Left removal up to the child class to handle in the onClose method
* Replaced calls on context to close inspector to calling close directly
* Renamed prepareSelection stub to onInitialize
* Emitting initialize event from within the open method
* Added recursion guarding to close method
* Changed the close method's argument to be remove instead of accept - the more common case is to save changes, and the only time you wouldn't save changes is if you were to remove the annotation
* Moved focus restore to close method
ve.ui.Context
* Moved the majority of the code in openInspector and closeInspector to event handlers for onInspectorOpen and onInspectorClose
* Updated calls to closeInspector re: accept->remove argument change
ve.ui.LinkInspector
* Renamed prepareSelection to onInitialize and rewrote logic and documentation
* Removed unused onLocationInputChange method
* Moved restore focus (now it's in the inspector base class)
ve.dm.SurfaceFragment
* Added word mode for expandRange
ve.dm.Surface
* Added locking/unlocking while processing transactions - this was not an issue before because this was effectively being done manually throughout ce (which needs to be cleaned up) but once we started using the content action to insert content dm and ce started playing off each other and inserting in a loop - we already do this for undo/redo so it makes sense to do it here as well
ve.InspectorAction
* Updated arguments re: close method's accept->remove argument change
Change-Id: I38995d4101fda71bfb2e6fe516603507ce820937
AnnotationAction and SurfaceFragment now use insertAnnotations.
ve.dm.Surface.test
* Removed test for annotate method (not needed anymore)
ve.dm.SurfaceFragment
* Now using getInsertionAnnotations method
* Added support for modifying insertion annotations when annotating a zero-length selection
ve.dm.Surface
* Moved in insertion annotations state from document model
* Added insertion annotation interface (enable, disable, areEnabled, get, set, add, and remove)
* Simplified handling of annotations on change
* Removed annotate method (not used anymore)
ve.dm.Document
* Removed insertion annotations (moved it to surface model)
ve.ce.Surface
* Cleaned up handleInsertion and changed it to use the insertion annotations interface on the surface model
ve.AnnotationAction
* Moved insertion annotation handling out of here since it's now included in the surface fragment
Change-Id: I047d656acf7fa1c63f726ca2b0801e1476f84f96
ve.AnnotationAction
* Added filter to the clearAll method to allow clearing all matching annotations only
ve.dm.Document
* Some variable renaming for consistency
ve.dm.SurfaceFragment
* Added truncateRange method
* Added annotation scope to expandRange method
* Added support for passing an annotation object into annotateContent method
* Switched to using name instead of type in annotateContent method to match the ve.dm.Annotation class
* Fixed logic in annotation mode of expandSelection so that expansion only takes place if the annotation is found
ve.ui.LinkInspector
* Moved most of the functionality elsewhere
* General reorganization
* Changed setOverlayPosition to accept 2 arguments instead of an object with 2 properties and renamed it to positionOverlayBelow
* Check for annotation object before extracting target information from it
* Initialize default target as empty string to avoid undefined being cast to a string and the default target becoming 'undefined'
icons.ai, inspector.png, inspector.svg
* Added generic inspector icon which will be used when a custom icon is not specified in future inspector subclasses
ve.ui.Inspector.Icons
* Added inspector icon
* Renamed clear icon to remove to match it's actual image
ve.ui.Context
* Greatly simplified the interface, reducing the number of methods by inlining a few things and combining others
* Now always listening to resize events on the window rather than only while document is focused
* Not listening to scroll events anymore, they used to affect the top/bottom positioning of the menu which we don't do anymore
* Lots of cleanup and reorganization
* No need to fallback to empty array since getInspectorsForAnnotations does so already
* Only consider fully-covered annotations for inspectors
ve.ui.Frame
* Simplified the constructor by introducing the createFrame method
* General cleanup
* Typo fixes
ve.ui.Inspector
* Generalized lots of functionality previously located in the link inspector class which will be useful to all inspectors (such as title, clear button, saving changes, etc.)
* Added setDisabled and isDisabled methods to manage CSS changes and avoid needing to check the CSS to determine the state of the inspector (storing state in the view is evil)
* Added getMatchingAnnotations method for convenience
* Added prepareSelection stub
* Lots of cleanup and documentation
* Type pattern is now defined in base class
* Added stubs for onOpen and onClose with documentation so that subclass authors know what these methods do
* Removed checks for onOpen or onClose methods since they are now noop stubs and are always there
* Added stub and removed checks for onRemove
* Made esc key close and accept - the illusion is supposed to be that the link changes are applied instantly, even though they are only updated when you close, so all closing except for when removing should apply changes - i.e. esc is now equal to back rather than being a special function that doesn't have an associated affordance
* Only consider fully-covered annotations when getting matching annotations
ve.ui.InspectorFactory
* Depending on type pattern now since it's always there
* Added getInspectorsForAnnotations method
* Return empty array if annotation set is empty
VisualEditor, VisualEditor.i18n
* Added default inspector message
Change-Id: I1cc008445bcbc8cba6754ca4b6ac0397575980d5
Moved implementation of all the tools into a reusable action
system. To execute an action just call
surface.execute( actionName, method, param1, param2, ... );
This helps keep tools simple, and opens the door to key commands
reusing the same code.
Change-Id: Ie786fa3d38d1ea17d39b5dfb8eeeb5f2256267ce
I think what happened here is I added the skeleton code, Kranitor came through and removed the unused arguments, then I merged in my implementations without pulling, then pushed - git merged cleanly, the arguments I thought were there were not there, and tests broke.
Change-Id: I5aa2968fef164c774a10db83a6df1753c93cd2dc
* Commands for Sublime:
Find*: "(\* @[a-z]+) ([^{].*) \{(.*)\}"
Replace: "$1 {$3} $2"
Save all && Close all
Find: " function("
Replace: " function ("
Save all && Close all
Find: "Intialization"
Replace: "Initialization"
Save all && Close all
* Consistent use of types (documented in CODING.rm):
- Merged {Integer} into {Number}.
- Merged {DOM Node} into {DOMElement}.
* Remove work-around /*jshint newcap: false */ from ve.js
Calling Object() as a function to to use the internal
toObject no longer throws a newcap warning in JSHint.
It only does that normal functions now .
(e.g. var a = Cap(); or var a = new uncap();)
* Add missing annotations (@static, @method, ..).
* Remove unused variables
* Remove null-assignments to variables that should just be
undefined. There's a few variables explicitly set to null
whereas they are set a few lines under and not used otherwise
(e.g. 'tx' in ve.ce.Surface.prototype.onPaste)
Change-Id: I0721a08f8ecd93c25595aedaa1aadb0e08b83799
* For the most common case:
- replace ve.extendClass with ve.inheritClass (chose slightly
different names to detect usage of the old/new one, and I
like 'inherit' better).
- move it up to below the constructor, see doc block for why.
* Cases where more than 2 arguments were passed to
ve.extendClass are handled differently depending on the case.
In case of a longer inheritance tree, the other arguments
could be omitted (like in "ve.ce.FooBar, ve.FooBar,
ve.Bar". ve.ce.FooBar only needs to inherit from ve.FooBar,
because ve.ce.FooBar inherits from ve.Bar).
In the case of where it previously had two mixins with
ve.extendClass(), either one becomes inheritClass and one
a mixin, both to mixinClass().
No visible changes should come from this commit as the
instances still all have the same visible properties in the
end. No more or less than before.
* Misc.:
- Be consistent in calling parent constructors in the
same order as the inheritance.
- Add missing @extends and @param documentation.
- Replace invalid {Integer} type hint with {Number}.
- Consistent doc comments order:
@class, @abstract, @constructor, @extends, @params.
- Fix indentation errors
A fairly common mistake was a superfluous space before the
identifier on the assignment line directly below the
documentation comment.
$ ack "^ [^*]" --js modules/ve
- Typo "Inhertiance" -> "Inheritance".
- Replacing the other confusing comment "Inheritance" (inside
the constructor) with "Parent constructor".
- Add missing @abstract for ve.ui.Tool.
- Corrected ve.FormatDropdownTool to ve.ui.FormatDropdownTool.js
- Add function names to all @constructor functions. Now that we
have inheritance it is important and useful to have these
functions not be anonymous.
Example of debug shot: http://cl.ly/image/1j3c160w3D45
Makes the difference between
< documentNode;
> ve_dm_DocumentNode
...
: ve_dm_BranchNode
...
: ve_dm_Node
...
: ve_dm_Node
...
: Object
...
without names (current situation):
< documentNode;
> Object
...
: Object
...
: Object
...
: Object
...
: Object
...
though before this commit, it really looks like this
(flattened since ve.extendClass really did a mixin):
< documentNode;
> Object
...
...
...
Pattern in Sublime (case-sensitive) to find nameless
constructor functions:
"^ve\..*\.([A-Z])([^\.]+) = function \("
Change-Id: Iab763954fb8cf375900d7a9a92dec1c755d5407e
Introduced the ve.AnnotationSet class to manage sets of annotations. This
is a generalization of ve.OrderedHashSet, a class that manages a set
using an array and an object keyed by hash.
Converted everything that stores, tracks or passes around annotations to
use ve.AnnotationSet. In particular, this means the linear model now
contains AnnotationSets instead of hash-keyed objects.
This allows us to maintain the order of annotations in the linear model,
and will help fix bugs with annotation ordering and splitting.
Change-Id: I50975b0a95f4cc33017a0b59fdede9ed1eff0124
[jshint]
ce/ve.ce.Surface.js: line 670, col 9, Too many var statements.
ce/ve.ce.Surface.js: line 695, col 6, Missing semicolon.
ce/ve.ce.Surface.js: line 726, col 22, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 726, col 41, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 733, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 734, col 24, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 1013, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 1019, col 17, Too many var statements.
ce/ve.ce.Surface.js: line 1023, col 18, Too many ar statements.
ce/ve.ce.Surface.js: line 1027, col 13, Too many var statements.
dm/annotations/ve.dm.LinkAnnotation.js: line 70, col 52, Insecure '.'.
dm/ve.dm.Converter.js: line 383, col 29, Empty block.
dm/ve.dm.Converter.js: line 423, col 33, Empty block.
Commands:
* jshint .
* ack '(if|else|function|switch|for|while)\('
* Sublime Text 2:
Find(*): (if|else|function|switch|for|while)\(
Replace: $1 (
* ack ' ' -Q # double spaces, except in certain comments
Change-Id: I8e34bf2924bc8688fdf8acef08bbc4f6707e93be
Also:
* Made a fragment with a null range become a null fragment
* Fixed incorrect order of arguments for binding a handler to transact event
* Added getters for surface, document and range
* Fixed several instances of passing a document instead of a surface into the constructor of a new surface fragment
* Fixed closest mode in expandRange - needed to check if parent existed before checking for it's type
* Fixed uses of ve.Transaction (doesn't exist) that were supposed to be uses of ve.dm.Transaction (does exist)
Change-Id: Ide13d9d2d1637399188c98c2e8b6e0826caeecc4
Refactor:
* ve.indexOf
Renamed from ve.inArray.
This was named after the jQuery method which in turn has a longer
story about why it is so unfortunately named. It doesn't return
a boolean, but an index. Hence the native method being called
indexOf as well.
* ve.bind
Renamed from ve.proxy.
I considered making it use Function.prototype.bind if available.
As it performs better than $.proxy (which doesn't use to the native
bind if available). However since bind needs to be bound itself in
order to use it detached, it turns out with the "call()" and
"bind()" it is slower than the $.proxy shim:
http://jsperf.com/function-bind-shim-perf
It would've been like this:
ve.bind = Function.prototype.bind ?
Function.prototype.call.bind( Function.prototype.bind ) :
$.proxy;
But instead sticking to ve.bind = $.proxy;
* ve.extendObject
Documented the parts of jQuery.extend that we use. This makes it
easier to replace in the future.
Documentation:
* Added function documentation blocks.
* Added annotations to functions that we will be able to remove
in the future in favour of the native methods.
With "@until + when/how".
In this case "ES5". Meaning, whenever we drop support for browsers
that don't support ES5. Although in the developer community ES5 is
still fairly fresh, browsers have been aware for it long enough
that thee moment we're able to drop it may be sooner than we think.
The only blocker so far is IE8. The rest of the browsers have had
it long enough that the traffic we need to support of non-IE
supports it.
Misc.:
* Removed 'node: true' from .jshintrc since Parsoid is no longer in
this repo and thus no more nodejs files.
- This unraveled two lint errors: Usage of 'module' and 'console'.
(both were considered 'safe globals' due to nodejs, but not in
browser code).
* Replaced usage (before renaming):
- $.inArray -> ve.inArray
- Function.prototype.bind -> ve.proxy
- Array.isArray -> ve.isArray
- [].indexOf -> ve.inArray
- $.fn.bind/live/delegate/unbind/die/delegate -> $.fn.on/off
Change-Id: Idcf1fa6a685b6ed3d7c99ffe17bd57a7bc586a2c
