* parameter.svg had no opacity set
* replace.svg had a document opacity of 80% in addition to the normal 75%
* re-rendered parameter.png (syntaxhighlight doesn't have png's yet)
Change-Id: I9c990fefaf4f5a7536b884b92523408146d7b2c7
initialize() is currently called synchronously, but once the CSS
transplantation code is fixed and it goes back to being async, that'll
cause problems.
* Add this.setupDeferred and use it to defer setupCheckboxes() until
after initialization
* Move code populating the edit summary from ViewPageTarget into
MWSaveDialog and use .setValue() rather than manipulating the
TextInputWidget's DOM. Defer this until after init as well
* Move clearing of the diff from ViewPageTarget into MWSaveDialog,
and don't connect it to the transact event at startup, only when
we've actually shown a diff
* Remove swapPanel( 'save' ) from ViewPageTarget, instead do this
on setup in the dialog itself
Bonus:
* Document events
* Get rid of onFooButtonClick handlers in favor of array syntax
Change-Id: Idcdae5e013340f4519db4387bab507e714d47941
We can't get the directionality from the focused node if there isn't one.
This doesn't add any logic to determine the directionality in creation
mode, filed https://bugzilla.wikimedia.org/show_bug.cgi?id=57421 for that.
Change-Id: I3ff8d48f19c7beef5e24b55712a26d86efa5812a
In order to do this we have to separate out the removal
operation from NDFR, so it becomes newFromDocumentInsertion
(again, although actually, for the first time). As NFDI is
an insertion we can just run fixUpInsertion on the data
part of it.
In order for the removal operation to be a proper removal
we have to allow metadata removal (the default is to merge it).
Change-Id: I16d575b61b9796e7e889f2c27cfe02b4a40b7639
This fixes some of the problems with pasting references.
It's a bit overzealous in that references get renumbered even when
replacing, which is unnecessary but doesn't actually have any
noticeable effect.
Unfortunately, the internal list state depends so much on the converter
having run that we now need to add yet another hack, to set the counter
to the appropriate value.
Change-Id: I3c6514ce600af4f4c037f419554d34b5a5c86a63
* Use 'this' instead of 'viewPage' in setupSaveDialog()
* Unwrap unnecessary .each() in restoreEditSection()
Change-Id: I45d0c9714d59e195d0c4413ed3dbe9cbabe45e9d
* Fix invalid @param name (mixup of type and param name).
* Fix incorrect reliance on inferred name for ve.Range.
@class uses the below function to guess its name, however
if @property is encountered, the @class block ends. Thus
it was indexed as a nameless class.
* Separate @property definitions because combining them like
that doesn't work (it silently ignored everything after the
first "from" property).
Also:
* Add some missing @static to static methods in ve.Range.
* Remove a few redundant @method while at it.
Change-Id: I8357c30711a4830af0b68b18350352c457a607f3
Us grouping the inheritable static properties that way is an
implementation detail that is polluting the index and makes
it harder to refer to individual identifiers.
It also causes problems under JSDuck 5 because that version is
more strict about defining properties (Foo.static.bar) of which
the parent is not defined in the index (Foo.static), we'd have
to add a sea of `@static @property {Object} this.static` all
over the place. Might as well hide this implementation detail
and just consider them static properties (just like we already
do for "private" properties).
Change-Id: Ibf2ebf7752aabc2b75b6ac6fa00e2284a181a600
setValue() doesn't do anything if this.value === value, but with
sanitization it's possible for that to be true while the value in
the DOM is out of sync and needs to be changed.
The fix is to check for this.value changing and the DOM changing
separately.
Change-Id: I5f571445f5729f5477902c155a4ee9588b7194a8
Previously we had a defaultSortKeyChanged value that lied - it was
possible for the value to be changed A -> B -> A by the user mid-
edit. However, the meta dialog assumed that defaultSortKeyChanged
wasn't lying, so blindly changed the meta item to the new value,
causing an unnecessary meta change if the user had done a no-op.
Now the value is renamed to defaultSortKeyTouched, and we actually
detect for content changes, and only change the meta item if a
change is actually needed (be that a removal, a replacement, or an
insertion).
Change-Id: I13022090bd7561a460a1151013e2b7d2a029f4dd
Also encourage callers to pass plain objects unless they know what
they're doing; it's almost always wrong to pass in a MetaItem.
Change-Id: I8e8ef8ac7f77ec9f929d797e467b9c9d1140d721
This was a regression that occurred when the toolbar was refactored
recently. The correct and previous behavior was if the cursor is in a
location where the context would show an inspector tool, that inspector
tool should be active in the toolbar.
Change-Id: I8ac2b1bd21b843db30e3e9f951702378007e139a
As of 46f40dc, we've split the VisualEditor API backend and the
part containing the parsefragment method no longer needs
an edit token.
This gets rid of the warning that started appearing after 46f40dc:
{
"warnings":{"main":{"*":"Unrecognized parameter: 'token'"}},
"visualeditor":{"result":"success","content":"<p>foo\n</p>"}
}
Change-Id: I36f79fa8ae48cdbec1b3506953418561ef2ff828
The generation promise can get resolved (e.g. AJAX request can complete)
after the node has been detached. In that case accessing this.model.doc
will fail, so check for this in doneGenerating().
Also attempt to abort the pending promise on teardown.
Bug: 56649
Change-Id: Ia55f1c2c8dc3a3619c0b50795e50fcae4bc6471f
Previously was failing for two reasons:
1. FF requires the form to be attached before submitting
2. options.watch failed because of FF's annoying Object.prototype.watch
Bug: 56767
Change-Id: I7b3d349f057f5b87f823ce788b4143f817af5303
Syntax highlight editor shouldn't rely on GUI language directionality
but always allow for LTR text editing.
Bug: 56780
Change-Id: Iae7f9eee20ffb9a003830503865458918f5e1df3
Changes:
* Cleanup the window API to use more consistent and intuitive methods - we
now use initialize/setup/teardown instead of
initialize/onSetup/onOpen/onClose as methods which are overridden, and
use open/close methods to control the window
* Change events around to have opening/open and closing/close events which
act as before/after points during the opening/closing process
* Make WindowSet and Context respond to windows being opened, rather than
opening them directly
* Fix a LinkInspector creation mode bug where the initial text doesn't get
reset
* Move inspector, a VisualEditor concept, back to VE
* Cleanup naming of SurfaceDialog, SurfaceToolbar, etc. to use shorter
names, they were given Surface* names when the generic ones were also in
VE, but now the generic ones are in OO, so they can return to their
original names
Change-Id: I82c4fed8bcb3fb5630938c8bc4dd9b2d5f1a8c1d
In general, the direction of the MWExtensionInspector textarea
should be dependent on the directionality of the node it is editing.
The only exceptions are <hiero> and <math> that need to have their
textarea LTR always; these two inspectors' directionality definition
is overridden in their onOpen() method.
Bug: 56779
Change-Id: Iac5c1c3bf2c61b9fa36c9588c1734c91ca4305c4
Underline is particularly important as CE will apply underline
formatting automatically when you press Ctrl+U but the
SurfaceObserver will not notice it, leading to inconsistency
between the view and the model.
For sub/superscript I've used the Google Docs key mappings as these
appear to have the fewest conflicts with existing browser shortcuts
and there isn't much consistency between desktop clients anyway
(Word and Open/LibreOffice use completely different shortcuts).
Bonus: reordered command lists to be consistent with UI layout.
Change-Id: I92998e42f9bcfb932d44e8f483811efd538e5981
Renamed events:
* performance.domLoad --> performance.system.domLoad
* performance.domSave --> performance.system.domSave
New events:
* performance.system.activation: total load time
* performance.system.domDiff: timing of paction=diff; like .domSave
* performance.system.domSerialize: timing of paction=serialize; like .domSave
* behavior.lastTransactionTillSaveDialogOpen: time from last transaction
until user opened save dialog
* behavior.saveDialogOpenTillSave: time from save dialog opening to user
clicking save
* behavior.saveDialogOpenTillReview: time from save dialog opening to user
clicking review (skipped when a cached diff is shown)
* behavior.saveDialogClose: when user closes save dialog; duration is time
* performance.user.saveComplete: time from user clicking save to successful
save completion; 'retries' indicates # of badtoken retries
* performance.user.saveError.*: time from user clicking save to failure;
'retries' indicates # of badtoken retries
** performance.user.saveError.abusefilter
** performance.user.saveError.badtoken: token was bad and we prompted the user
** performance.user.saveError.captcha
** performance.user.saveError.editconflict
** performance.user.saveError.empty
** performance.user.saveError.spamblacklist
** performance.user.saveError.unknown
* performance.user.reviewComplete: time from user clicking review to diff showing
* performance.user.reviewError: time from user clicking review to diff failure
since dialog was opened
Change-Id: I9815fa637d34c766c163e181d2f9527d3f32a7c3
When the editor is focused, the selection goes back to the start of
the document. This was remedied in the .focus() method, but not in
response to native focus events, so when external code blurred then
refocused the editor, the selection would move to the top.
This broke section editing on wikis where ULS is installed: the
selection would be initialized at the start of the section, but then
ULS would load and blur the documentNode (by focusing the pasteTarget)
and then focus it again, so the selection would move to the top.
Instead of restoring the selection only in .focus(), restore it in
response to focus events on the documentNode. When this is done,
saving and restoring the scrollTop is no longer needed.
Bug: 56651
Change-Id: I14700174ee092f9b208215d31a7d1871078a89bf
The resizing handles under ResizableNode are created in the location of the image
but if the page is edited and the image moves relative to the document, the handles
remained where the image was previously and not where its updated location is at.
This code fixes that bug by changing the CE event listening to the model's 'transact'
instead of 'history', and clears the cached offset when a 'transact' event happens.
Change-Id: Id0e4296dd89b24839ba68a534ca77d73c23b7434
When the ListToolGroup in the toolbar (the "More" section) is scrolled
down such that the top tool is partly obscured, and you hover over the
bottom half of the "More" button, the top tool displays a hover effect
and using the scroll wheel will scroll the list rather than the page.
This is because the list has a box-shadow that's 1em tall, and the
height of the "More" button is 2em. And in Chrome, pointer events
"work" even in the box-shadow area. Roan reported the Chrome bug at
https://code.google.com/p/chromium/issues/detail?id=314291
This change works around the bug by making the tools in the list
inline-block instead of block; for some reason the bug only affects
block elements.
Change-Id: I4ea3f41c91d0ff5d5cc150fe8acc3427f0ab5f3a
Some 've-ui-toolbar-bar' classes hadn't been converted to OO.ui so the
toolbar had no border. Also removed a useless rule in mw.ViewPageTarget.css.
SA platform didn't override OO.ui.msg to use the ve.msg so no messages
were getting through.
Change-Id: Ieb5bc3c98d1c435ec194b201b517a688cd9b02b9
* Our metadata insertions now need to be the same length as the data
insertion, not one more, so:
** Remove the +1 in the listMetadata splice
** Shorten the metadata variable by dropping the merging of the
metadata right before and right after the internal list; it was
also including the metadata right after the internal list twice
*** We still need to deal with this in some way though, left a TODO
** Fix the metadata insertion test for these changes
* Fix null reference keys in the test data; we made all references
keyed a while ago, but this test data was never updated for that
** The remapping of reference data doesn't remap auto/N keys yet,
left a FIXME for that
Change-Id: I8ef4e6ee7c1808574d81d0b83294848afd400cd7
Stop using this.$.frame.dir - a horrible hack made of duct tape
and bubble gum.
Or perhaps rather, masking tape and post-it-notes...
Change-Id: I53690e4485974b95edbdd255c0b96c2f639c5261
Objectives:
* Rename this.$ to this.$element
* Rename this.$$ to this.$
* Get rid of the need to use this.frame.$$
* Rename OO.ui.Element.get$$ to OO.ui.Element.getJQuery
Changes: (using Sublime Text regex patterns)
* Replace "get$$" with "getJQuery"
* Replace "\.(\$)([^\$a-zA-Z])" with ".$element$2"
* Replace "\.(\$\$)" with ".$"
* Replace "'$$'" with "'$'"
* Set this.$ to null in constructor of OO.ui.Window
* Set this.$ to this.frame.$ in initialize method of OO.ui.Window
* Replace "\.(frame.\$)([^\$a-zA-Z])" with ".\$$2"
Bonus:
* Use this.$() in a bunch of places where $() was erroneously used
Change-Id: If3d870124ab8d10f8223532cda95c2b2b075db94
Replaced uses of extendObject with $.extend . Replaced the one use of
OO.ui.indexOf with Array.prototype.indexOf because that's what
everything else was already using.
Change-Id: I63f40989057b8065ec977efafbf68d6e22c8e679
By serialising the current DOM, and injecting it into a form we can
end up in the source editor with our VE changes converted.
Bug: 50687
Change-Id: Iafcc02a737d9c6c3a59dce1caff130d47ca25650
