Since the menu only shows while it's input is focused, input must be focused
prior to suggestions being popuplated. Fixes race condition where
look up request is near instantaneous.
Change-Id: Icf645d051415ac3ee9e15bc85f22f29dc9b64666
The presence check used to be against the VE global, but we
recently made that impossible without providing an alternative.
Though by accident, mw.libs.ve has become the new way to check
for presence.
Change-Id: If85695525777a71dde467675052d2ede4e52c9b7
* Hooks for activation, deactivation, save dialog state change,
and tab setup.
* Class for save button (needed to point to it in a clean way).
Also done for cancel button to be consistent, though GuidedTour
doesn't currently use this.
Change-Id: I4a0e0631d513fb09c3408f2f36a0de0bd51e1a37
Objective:
* Cut off really long parameter names with ellipsis
Changes:
ve.ui.Widget.css
* Use ellipsis when option labels get too long
ve-mw/ve.ui.Widget.css
* Limit the size of a parameter result widget label - this is a hack, but
since there are strange bugs with using ellipsis together with % based
width, it's the best we can do for now
Bug: 50800
Change-Id: Idbfa336d2bba376b0d078fdd0ece65926d610d81
Objectives:
* Make context menu toolbar consistently sized and aligned, especially
in monobook
Changes:
ve.ui.Toolbar.css
* Remove vertical line between groups, just use whitespace
* Switch from padding to margins to avoid size calculation issues
ve.ui.Tool.css
* Remove tiny margin on button tools, tightening them up a bit
* Replace 50% 50% with center center
ve.ui.Context.css
* Switch from padding to margins to avoid size calculation issues
* Use different margins depending on text direction
* Reverse the 0.8em rule used in the dialog - this is a hack, it should
be cleanup up later with a better strategy for normalizing the size
of text within VE elements
Change-Id: If65f12382625efa33777e284bd23a94dc509436a
Reference counting indicates these styles are not in use, so they can now be safely garbage collected.
Change-Id: I432f73490eeb00ff414f150fcf26c718607bac95
Follows-up Ic0c6d190c9b78 which introduced a full linmod copy in a
scope that is also accessible by other closures (namely the
callbacks to jQuery.Deferred #done and #always, and setTimeout).
Though in theory engines may be able to garbage collect it,
I doubt it. Though browsers probably destruct the setTimeout
callback I know at least the closures pass to jQuery.Deferred
are not released by jQuery, so an engine would have to
understand these other functions well enough to know it doesn't
access the `data` variable.
Let's release explicitly to be safe.
Change-Id: I11000edcad4690dcce53b6e9d1a45bf2ab82fbcb
Objective:
* Prevent input while the inspector is animating open
Changes:
ve.ui.LinkInspector.js
* Disable and then re-enable the surface while the inspector is opening
ve.ce.DocumentNode.js
* Remove opacity changes on disable/enable
ve.init.mw.ViewPageTarget.js
* Change the opacity of the document when save dialog is open
Bug: 51075
Change-Id: Ic7910a666b33b41b57b035a15cf1f8c9264e7111
Objectives:
* Make option widget icons correctly placed in RTL
* Make embedded context toolbar correctly placed in RTL
Approach:
Use separate elements for icons within option widgets which have more
flexibility when rendering in either LTR or RTL when compared to CSS
background position. The simpler approach, using CSS background
position offsets, isn't cross-browser compatible at this time.
Changes:
ve.ui.OutlineItemWidget.js
* Remove custom icon implementation, using parent class implementation
instead
ve.ui.OptionWidget.js
* Add icon option, which adds an icon element only if an icon was
specified
ve.ui.MenuItemWidget.js, ve-mw/ve.ui.MWParameterResultWidget.js
* Add override for icon config option
* Document icon config as private
ve.ui.Context.js
* Add detection and special handling for positioning embedded context
toolbar when rendering in RTL
ve.ui.Widget.css
* Add styles for option widget's new icon option
* Add styles to make indentation still work for outline item widgets
* Adjust styles for menu item widget as per changes in option widget
ve-mw/ve.ui.Widget.css
* Adjust styles for parameter result widget as per changes in option
widget
Change-Id: Ibfa4b613e0fd7902f8a2c78b5717de402c5f82b8
We previously manually loaded CSS into these frames, which is flawed
because it completely bypasses ResourceLoader (so CSSJanus didn't flip
them, necessitating a bunch of hacks for RTL), and doesn't pull in
MediaWiki styles (so templates inside references don't render correctly).
Instead, this commit copies all styles from the main document into each
frame's document, inlining what it can.
Loading all styles in dialogs and inspectors caused some problems,
initially. We didn't namespace our styles for dialogs vs. inspectors
at all; the only reason inspector styles weren't being applied to dialogs
and vice versa was because we controlled which files were being loaded
in which context. This commit namespaces the inspector and dialog styles
where needed so they don't conflict and try to override each other.
Tested in Vector and Monobook, but not in Apex and not in RTL.
ve.init.mw.ViewPageTarget*.css:
* Namespace styles that are only intended for the main document
* Undo Monobook's font-size: x-small; in frames
*Dialog.js:
* Remove addLocalStylesheet() calls, we don't need those any more
** ve.ui.MWDialog seems to be unneeded now, we may want to remove it
*.css:
* Remove @noflip-ped RTL rules where they were just flipped versions of
their LTR counterparts
ve.ui.Dialog.css, ve.ui.Inspector.css:
* Namespace styles with .ve-ui-dialog-content / .ve-ui-inspector-content
ve.ui.Frame.css:
* Move the margin:0 and padding:0 here (were in the frame <body>'s style
attribute) and add background:none to prevent frames from getting
the skin's background (grey in Vector, a book in Monobook)
ve.ui.Dialog.js, ve.ui.Inspector.js:
* Add ve-ui-dialog-content / ve-ui-inspector-content class to the
frame's content <div> so we can restrict styles to only apply in
dialogs / inspectors
ve.ui.Frame.js:
* Replace infrastructure for @import-ing stylesheets with transplantation
* Remove code polling to see when the stylesheets were loaded
** We can't do this in the new approach AFAIK, since all styles in the
frame are either inlined or inaccessible due to the same-origin policy
** We also shouldn't need it because the browser should have cached the
styles when it loaded the main document
* Apply ve-ui-frame-body class to the frame's <body> so we can style it
** Move inline padding:0;margin:0; into ve.ui.Frame.css
** Move the ve-ltr/ve-rtl class up to the <body>
ve.ui.Window.js:
* Remove infrastructure registering stylesheet URLs to load
Change-Id: I4a37115301811ad860f4578344a04873ea8c2b69
Resolving this bug reveals a completely unrelated bug where hitting
enter while making a link prior to the input being focused, the
selected text gets replaced with a new line.
Bug: 51075
Bug: 49941
Change-Id: I61a90eeaa40b8b66886c17152544c46fa8ca396a
Whoops, merged too soon. The dropdown part of it doesn't
actually work right.
This reverts commit 3c51ebad93.
Change-Id: Ieafbf18ca8a43b07e33a787772abbc77aef63e4c
Conversion is apparently pretty slow on large articles, so put it inside
the setTimeout(). We still need to copy the data array synchronously
though.
Change-Id: Ic0c6d190c9b782f8c643d00d335f0e004d860bcf
* ve.ui.MenuWidget.js
MenuWidget no longer creates an embeded input element by default.
In the case of no configured input element, we bind the keydown
handler to window with addEventListner while using the useCapture
flag. This nicely prevents elements lower in the dom from triggering
( document node ) Supported in IE9 and above and all modern browsers.
* ve.ui.ListAction.js
Since MenuWidget is no longer stealing focus from the surface,
we no longer need to restore focus after a list item conversion.
This is the end goal, as browsers like Chrome like to scroll to
the top of elements that gain focus.
Bug: 50792
Change-Id: I5b6969bca1a58b040708f8ac9d3dc8b07ddf9e6b
Apparently they can't get their basic ECMAScript right. In 2013.
It doesn't come up that often, because you don't splice an array with
more than 256 elements every day. Only implemented in ve.batchSplice
for now, as that function does handle thousands of elements routinely.
Other callers of .splice() can simply use that instead.
Bug: 50385
Change-Id: I281a61d55c6f7df5f28627a1df80f2a001110607
Firefox 13 and 14 were the cause of links magically turning into [[./Foo]].
Once the immediate rush of deployment is over, we'll want to investigate as
to why and hopefully find a way to unblacklist FF.
Bug: 50720
Change-Id: I7a9dddb693091fa1e44b4325e77b9e4f55e5c193
The handler for the Edit tab already is in this conditional,
for edit section we were making the assumption that they only
ever appear on a view page, but that's wrong. They're also shown
on a diff against the latest revision of the page.
Bug: 50925
Change-Id: I802e548cbcdc03cfca66129466668854604bc3e7
* Only pass the oldid to the API from #load if we restoring from
oldid in the url. Otherwise load the latest version.
* Setting 'restoring' from mw.Target instead of mw.ViewPageTarget
so that we don't rely on mw.ViewPageTarget in mw.Target#load.
* Fix the API to not require 'oldid' to be passed.
* Fix the API to actually return the 'newrevid' property. It
was doing a no-op on a $result that is never used due to the
same variable being overwritten with the result of parseWikitext.
* Moved updating of wgCurRevisionId to mw.ViewPageTarget as it
belongs there (possible future inline editors probably act
on a different page than the main one). Also made it only
update if it isn't undefined, so that a null edit doesn't
result in wgCurRevisionId being unset.
Bug: 49943
Bug: 50441
Change-Id: I221e5038f95eadf6d87013e80f12394f0376a293
Show an inspector with inputwidget when the user clicks a math
node. The data of the math equation is shown in the
edit box, it can re-render the math tag image when
the inspector is closed, and save the change when
saving the page.
TODO:
* Change the icon from link to math
* Translate title by translatewiki in i18n
* Other further UI improvements
Change-Id: I4d7533af25186cc39cc4bc6a4326d222ffd6db19
This patch creates two files handling math node matching,
which are:
ve.dm.MWMathNode.js - a basic version of toDataElement
and toDomElement functions work
ve.ce.MWMathNode.js - math formulas in VisualEditor are
clickable and render as img tags
Change-Id: Ib909c5fb02e385c88050f42d02d207ab6a97d0dd
Any annotation could have a style attribute which has
a compound effect, and this also prevents roundtrip
errors. Button tool logic should prevent any annotation
from being applied twice which shouldn't be.
Bug: 49755
Change-Id: I8502a55cd2b195d28d0e2ecd63f15de670f80d60
Since we're now only loading the light-weight init on page load,
the section editing wasn't just deferred to after page load (like
it was before), but wasn't happening at all until you clicked
"Edit" (at which point the library loads). It only worked when
going back to "View" after "Edit".
Contrary to tab layout, edit section handling needs to be
accessible both in the top init and in the main target class
because we need to run it both at run time and after the user
has saved a page when we show them the updated page without
refresh. This is why we need to transfer the method at run time
and give the main class access to it as well.
Can't wait for bug 50707 to get rid of this mess...
Bug: 50731
Bug: 49993
Change-Id: Iab9c81222df7f1084179c3643d158374a89ca14b
This re-fixes the fix to the frame fix. fix fix.
Two things changed: Background position flipped to the right properly
(was somewhat off before) and text-alignment flipped as well.
Bug: 49613
Change-Id: I0aa317ef674537d20d7ed64e74eaa3cfe8030c8c
This was broken after 92c38ea removed ve-mw files from the
static loaders but didn't update makeStaticLoader.php so
it was harder to keep the files in sync and a few minor issues
on the documentation pages.
Since the files are still mixed in the non-mw modules the only
way to exclude them is to do what was manually done in 92c38ea:
Filter out paths starting with "ve-mw/" from non-mw modules.
Change-Id: Id58ee89ac18c63c01719dc11ec7a07ddeee3ea0b
Initialisation initialisation? It's time to rename ve.init
to ve.platform and ve.init.Platform to ve.platform.Environment,
but that'll come later.
* Moved support detection and skin set up to separate class-less
file.
* Swapped usage of ve.msg for mw.msg.
* Callback of edit tab now does an mw.loader call to fetch
the actual VisualEditor libraries.
Though mw.loader won't load the same thing twice, we would
bind a callback each time. To avoid instantiating ViewPageTarget
more than once we use a Deferred.
Bug: 50542
Bug: 50608
Bug: 50612
Change-Id: Ic8b0004ab5288fa91bb29d496485b93ffd8d977e
Objective:
* Make the majority of link inspector, which is generic to any annotation, usable for other annotation inspectors
Change-Id: I1f7e9c13537105da7aa0351c9c92e8af5eb5a3f4
Just a proof-of-concept that this would work on Opera. I'm figuring out
what was this for initially...
This reverts commit 30dadb6c8c.
Bug: 47794
Change-Id: Ie4f1334e0beb7ba7d4f4aa3b42464fa219c4778c
!$element.is( ':visible' ) - jQuery .is() returns boolean based on the
parameter.
$element.not( ':visible' ) - jQuery .not() returns a filtered jQuery
collection with elements matching the parameter removed.
Change-Id: Iedf55f3453514ee710bbb6d702bbf9a5570a4a1d
Move all MW-specific files into the ve-mw directory, in preparation
for moving them out into a separate repo.
All MW-specific files were moved into a parallel directory structure
in modules/ve-mw . Files with both generic and MW-specific things were
split up. Files in ve/init/mw/ were moved to ve-mw/init/ rather than
ve-mw/init/mw ; they're still named ve.init.mw.* but we should change
that. Some of the test files for core classes had MW-specific test cases,
so those were split up and the test runner was duplicated; we should
refactor our tests to use data providers so we can add cases more easily.
Split files:
* ve.ce.Node.css
* ve.ce.ContentBranchNode.test.js (MWEntityNode)
* ve.ce.Document.test.js (some core test cases genericized)
* ve.dm.InternalList.test.js (uses mwReference test document)
* ve.dm.SurfaceFragment.test.js, ve.ui.FormatAction.test.js
** Made core tests use heading instead of mwHeading
** Updated core tests because normal headings don't break out of lists
** Moved test runners into ve.test.utils.js
* ve.ui.Icons-*.css
* ve.ui.Dialog.css (MW parts into ve.ui.MWDialog.css)
* ve.ui.Tool.css
* ve.ui.Widget.css (move ve-ui-rtl and ve-ui-ltr to ve.ui.css)
ve.dm.Converter.test.js: Moved runner functions into ve.test.utils.js
ve.dm.example.js:
* Refactored createExampleDocument so mwExample can use it
* Removed wgExtensionAssetsPath detection, moved into mw-preload.js
* Genericized withMeta example document (original version copied to mwExample)
* Moved references example document to mwExample
ve.dm.mwExample.js:
* Move withMeta and references example documents from ve.dm.example.js
* Add createExampleDocument function
ve-mw/test/index.php: Runner for MW-specific tests only
ve-mw/test/mw-preload.js: Sets VE_TESTDIR for Special:JavaScriptTest only
ve.ui.Window.js:
* Remove magic path interpolation in addLocalStyleSheets()
* Pass full(er) paths to addLocalStyleSheets(), here and in subclasses
ve.ui.MWDialog.js: Subclass of Dialog that adds MW versions of stylesheets
ve.ui.MW*Dialog.js:
* Subclass MWDialog rather than Dialog
* Load both core and MW versions of stylesheets that have both
ve.ui.PagedDialog.js: Converted to a mixin rather than an abstract base class
* Don't inherit ve.ui.Dialog
* Rather than overriding initialize(), provide initializePages() which the
host class is supposed to call from its initialize()
* Rename onOutlineSelect to onPageOutlineSelect
ve.ui.MWMetaDialog.js, ve.ui.MWTransclusionDialog.js:
* Use PagedDialog as a mixin rather than a base class, inherit MWDialog
bullet-icon.png: Unused, deleted
Stuff we should do later:
* Refactor tests to use data providers
* Write utility function for SVG compat check
* Separate omnibus CSS files such as ve.ui.Widget.css
* Separate omnibus RL modules
* Use icon classes in ViewPageTarget
Change-Id: I1b28f8ba7f2d2513e5c634927a854686fb9dd5a5
This actually fixes a hack done in a previous commit where an undocumented
surface option was being passed, but not always. And in some cases there
were uses of the popup which didn't really have a surface to pass in.
Change-Id: I08b5dc2dc879f6abd1b16d1d66ac1d8b5624f673
Set a static property on big, small, sup, sub to allow them
to be added multiple times to an annotationSet.
Fix the converter to count out annotations when opening/closing.
Bug: 49755
Change-Id: Ifbede9345a66434022dbd681eada447ab81ab025
Objective:
* Allow browsing, searching and adding documented parameters
Changes:
ve.ui.MWTransclusionDialog.js
* Replace regular text input with ve.ui.ParameterSearchWidget
* Fix uses of $(), this.frame.$$ is correct
ve.ui.Dialog.css
* Change rules for addParameterFieldset to make search widget auto-size vertically
ve.ui.Widget.css
* Add styles for ve.ui.MWParameterResultWidget
ve.ui.MWParameterSearchWidget.js, ve.ui.MWParameterResultWidget.js
* New classes
* Provides a way to search and select parameter for a template
* Displays parameter label, name, aliases and description
*.php
* Links to new files and messages
Change-Id: Ie5dbe8c44ce5d64c4b49b09517fb66cd30dd7304
This fix adds a directionality property to the frame objects so directions
can be inherited and manipulated inside the frame <body> tags.
There are also several corrections to flipping positioning of panels
in the GridLayout and of the icons in fieldsets and labeled elements
so they appear properly (right instead of left).
I've added a 've-rtl' / 've-ltr' class to frame content divs to serve as
selectors for rtl fixes and general language fixes. Most CSS corrections
would likely be fixed when CSSJanus works in iframes, but the selectors
would still be useful.
This sets the stage for directionality inheritance inside iframes,
and fixes most of the problem with the Page Settings window in RTL wikis.
It also fixes all the labels with icons across VE interface.
Bug: 49613
Change-Id: I418e669b0999552167683352acb365a4249ab9cc
Per the TemplateData spec:
* Most message values can be null, though they're never undefined.
* 'deprecated' is actually {boolean|string}.
For us:
* Make #isParameterDeprecated always return a boolean
* Add #getParameterDeprecationDescription to get the explanation
of why a parameter is deprecated
* getParameterDescription doesn't need to pass 'null' for fallback
since that's the default fallback.
And it may return null or string.
* #getParameterSets returns an array of Set objects, not an array
of strings (see spec for more information).
Change-Id: Iee788bc8fa6f0545085a0f154b77b8176f770dd2
ve.ui.Surface.js
* Make local overlay a child of ve-ui-surface and a sibling to
ve-ce-surface elements.
** This keeps local overlays relative to their surface and eliminates the
need for insane z-indexes.
ve.ui.PopupWidget.js
* PopupWidget boundaries are now relative to ve-ce-surface and no longer
protrude out
ve.ce.Node.css, ve.ui.Window.css
* Removal or replacement of insane z-indexes.
ve.ce.FocusableNode.js, ve.ce.ProtectedNode.js, ve.ce.ResizableNode.js,
ve.ui.Context.js
* Translate offsets from local overlay
ve.init.mw.ViewPageTarget-monobook.css,
ve.init.mw.ViewPageTarget-vector.css
* Skin specific z-indexes for global overlay
ve.init.mw.ViewPageTarget.js
* Applied direction specific mw class to ce.Surface vs ui.Surface to
prevent mw content styles from being applied to ui elements.
ve.ui.Dialog.css
* Adjustments to surface inside of dialog so that relative offsets for
local overlays can be properly calculated.
ve.ui.Surface.css
* Explicitly force .ve-ui-surface to be relative so that it's children can
be relatively positioned.
ve.ui.Widget.css
* Removal of unnecessary font-size properties now that local overlay is
sibling of surface.
ve.js
* Added get relative position helper method to translate position offsets
from target parent
Bug: 50241
Change-Id: Ibadce404a2286bc5dcec48f0d9da89004dbbd867
Resize handle event handling was set up to bind on focus and
unbind on document mouse up. The problem is that focus can be
set programmatically and sometimes more than once. This would
cause the image to be properly resized once, but immediately
resized again to 0x0. Now, before binding events to the resize
handles, all resize handle events are unbound.
Change-Id: I22b7902d303b5ca43e132c121d743d6815980fc6
If a block image is resized and undone, there are lots of problems.
* The block image gets the wrong size. When rolling back the
transaction, height and width are passed as strings.
MWBlockImage tries to set the width to: width + 2. A 300px image
became 3002px.
* Resize handles didn't reposition and resize
* Relocatable drag marker didn't reposition and resize
* Focusable highlights didn't reposition and resize.
Change-Id: I8792b567b77da90ce5a2ad132e306705c5706606
Reference lists would never disconnect, and some transactions would cause them to be "updated" even though they don't have a document anymore.
A way to test this is to insert an image in a document with some references. When you click apply, it crashes.
The solution was to make sure we actually disconnect from the internalList and listNode on teardown.
Change-Id: Ieb0354938b68fe5e7965f61f9ccce07cd6fb1120
Added both bidi-isolation and directionality. Since the directionality
has to come from the user interface (and not the wiki dir itself) I had
to read the $('body') direction. The other option could be adding a
mw.config.get().userLanguageDir that picks up the interface directionality
on top of the wiki directionality.
Bug: 50543
Change-Id: I9a00e9545a46f13750ab0d118b23d05573ee1a2e
Objective:
* Enable navigating search results using keyboard up and down keys
* Bubble up query input enter events
Changes:
ve.ui.SearchWidget.js
* Route query input events to emit
* Add handler for keydown events
* Support navigating through the list of results using vertical arrow keys
Change-Id: Ia2e4b27075a8ab2e29a69294e9f7847e8f5a3f83
Issues:
* Selected item is removed, but no select even was emitted
Changes:
ve.ui.SelectWidget.js
* On remove, emit select null when removing a selected item
* On clear, emit select null always
Change-Id: I1a94b0f8a841611b20e09f6c02f37fb9589e85c3
Changes:
ve.ui.SelectWidget.js
* Make getRelativeSelectableItem properly loop around
* Replace confusing and broken getClosestSelectableItem with getFirstSelectableItem since that's the only use case we had for it anyway
ve.ui.PagedDialog.js, ve.ui.LookupInputWidget.js
* Update calls to getClosestSelectableItem to use new method
Change-Id: I2399d01a45c43d1ad663ed6c6de156e796065306
Changes:
ve.dm.MetaList.js
* Auto-initialize index to the end of the list (like the docs claim) even when not providing an offset
ve.ui.MWCategoryInputWidget.js
* Cleanup fix for not offering to move the last category to the end
ve.ui.MWCategoryWidget.js
* Allow pressing cancel on the meta dialog after moving a category to the end without crashing
Change-Id: I45059bda022639f7942f1799a42ecf8a4d962df0
Break setUpSurface into a bunch of parts that setTimeout() each other.
This breaks the initialization of the editor as a whole up into the
following phases:
0) Receive AJAX response, parse HTML
1) Build linear model data
2) Build DM tree
3) Build CE tree, CE DOM, create surface
4) Initialize surface, some UI initialization
5) Launch sanity check, remaining setup, unlock editor
This is a bit hacky right now, we'll probably want to refactor later.
ve.dm.InternalList.js:
* Allow construction without a dm.Document
ve.ui.Surface.js:
* Allow construction based on a dm.Document
Change-Id: Ibf48a7e85cd7376c8f6205ed165ff57e71e34c35
Since format dropdown tool is the only tool where we actually lose
focus to the documentNode, we must restore focus so that firefox
and chrome will display a cursor after converting content branches.
Bug: 50338
Change-Id: I4059b2688565570e0efc21078035775b7aed49e1
As part of this, put the 'help' icon next to the beta icon, make the
text not greyed-out (now that it's an actual action) and provide the
link.
On hover, all three items get underlined, which is irritating, however.
Bug: 50476
Change-Id: Id65968072b7134f5864bbd96acf34fd0c23fe17c
Previous when the selection was collapsed and the cursor was in a block
slug we'd get a JS error thrown. This fixes that, though it could do with
a refactor in time.
Bug: 47947
Change-Id: I596ea9bc553f563e3dc7689c518c7d1319ac1dc3
To trigger a save rejection from the api, set:
$wgSpamRegex = '/spam/i';
and making an edit adding the word "spam" to a page.
Class changes:
* Rename message system in the save dialog from "warning" to
"message" as it will now contain both warnings and errors.
(css class, class property, method names, ..)
Localisation:
* Remove ugly hardcoded and wikitext-requiring "'''Warning:'''"
prefix from the warning message, instead have a message for the
word "Warning" and re-use this in #showMessage for each message
of type "warning" (bolding applied in code instead of in i18n).
* Rename visualeditor-savedialog-dirtywarning to
visualeditor-savedialog-warning-dirty and remove from
VisualEditorMessagesModule.php as it no longer requires pre-
processing from the server.
Clean up:
* Re-alphabetise the order of some messages.
* Clean up duplication and redundant logic in mw.Target#onSaveError
and mw.ViewPageTarget#onSaveError.
Bug: 50350
Change-Id: I3daf631fb0d62ba88e05aa50c77c9940d61395a0
Assumption about toolbar height never exceeding 88px is not correct. At
least in Chrome, after setting in advanced configuration font size to
"Large" instead of "Medium", the toolbar's height is 110px and part of it
is transparent. Because it is transparent user can see content behind it
when scrolled down, which makes for a not really good experience.
Change-Id: Ibdc2410cc4ab29bfe774961fc062d172386975d4
We currently change <ref name="foo">Foo</ref> ... <ref name="foo">Foo</ref>
to <ref name="foo">Foo</ref> ... <ref name="foo" /> , because know
that the second ref tag isn't canonical and so we blank it.
Instead, we now preserve the contents of all ref tags that come after
the canonical one.
Change-Id: I45a51a879271890fe46c4184f1029f12d27af678
<table>\n\n</table> round-tripped to <table>\n\n\n\n</table> because
we would store '\n\n' in both the innerPre and innerPost fields.
Fixed by not setting innerPost if the element is empty.
Change-Id: I0393bfaf9793fdebc8fff72c8760113fa69bb2bd
The converter wasn't setting .annotations on meta items created to
represent empty annotations, which meant that HTML like
<i>Foo<b></b></i> would end up as <i>Foo</i><b></b> in the linmod.
Change-Id: I13d7d9820beeee1e8c3673e08051361d6c6ac4cd
If you had <meta /><b>Annotated text</b> in a wrapper paragraph,
the converter would swap them and output the linear model equivalent
of <p wrapper><b>Annotated text</b></p><meta />.
This happened because the meta item was queued, and annotations didn't
trigger metadata queue flushes. The fix is to trigger a metadata queue
flush whenever we're about to write something that isn't itself queued.
Change-Id: I168abc0392fbec5503271d1653ee5c38518f857d
Objective:
* Fix issue where async behavior of addTemplate caused templates to be added in the wrong order
Bonus:
* Get rid of special adders for transclusion parts, just construct objects outside and use addPart
Change-Id: Ibe579f033873446376d72d3bd1b9f92d9f361de5
* 'captcha' property from ConfirmEdit API is already exposed
in ApiEdit and ApiVisualEditor through the 'edit' property
in our response data.
* Add parameters 'captchaid' and 'captchaword' to ApiVisualEditor
and mw.ViewPageTarget#getSaveOptions. ApiVisualEditor will
forward these to ApiEdit which forwards them to FancyCaptcha.
* We display the captcha through a saveDialog warning.
Bug: 50356
Change-Id: Ia7d2102cba89d00ec8508e846061023b330ece4f
We need this for captcha's. They'll be added and displayed as
a warning, and cleared like all others. But they shouldn't be
wrapped in a paragraph and aren't delivered as html text but
as a jQuery object (can't serialise to static html since we'll
have to keep a reference to the TextInputWidget and what not).
Change-Id: I3734fbd3c6f0270094db014bbc76d065a73ab918
This parameter was documented as "HTTP status text" but this
was incorrectly copied from other events. The actual code
never passed anything other than null.
Now documenting it as API response data (if available, else null)
Change-Id: I88c8c525f3ca53fd47de634aec469be372884cfc
Parameter config is optional (both in the parent class and here),
this subclass forgot to add the fallback.
Though in a plain subclass the local fallback isn't needed
(parent class takes cares of it), in this case it is needed
since the constructor directly accesses config.multiline etc.
Change-Id: I3f9b73efb6c40a29efa221e1654b1247baaca281
This is done by setting renderHtmlAttributes to false, for both block
and inline transclusions.
Bug: 49925
Change-Id: I975cf1de3b273a5189e6edf7db937c4388fa4fbe
Objectives:
* Use template data for templates added to a transclusion using
the list controls
* Cache template data between different instances of the dialog
* Allow placeholders to be replaced with templates asynchronously
* Save http request and abort pending requests on close
Also:
* Fix breakage of (unused) method getParameterAliases
(dont delete aliases)
* Remove unused method getTemplateSpec.
Bug: 49778
Change-Id: I391e51cb900ef5560455d6f3d4d2a8b99ed2b034
When the cursor is programmatically moved, as we need to do
from time to time, Firefox's internal reference for the appropriate
cursor location on nearby lines is maintained, creating an
unexpected experience.
The fix is to wiggle the selection. This tricks Firefox into thinking
that it adjusted the selection natively.
Bug: 48289
Change-Id: I75e7e4467ec1c3faf344709886b9be5b1423cd3e
Rational is that you wouldn't want to highlight something that is not
visible. And, obtaining offsets for hidden slugs in this case does not
return correct values.
Bug: 49818
Change-Id: Ic2818423c26f5bbb2c056c3c94740d822be4f1b8
Ed & Roan:
Disable editing of references of which we are unable to find the
source (e.g. <ref name="x"> without a target, or when the target is
currently nested in something we don't yet process such as inside a
<references> block or a template).
Timo:
Improve UI to not be a regular focusable node where the inspector just
won't show up but add a not-allowed cursor and explanatory tooltip.
James:
Fix messages to refer to VisualEditor instead of "the" VisualEditor.
Change-Id: Ib2bca092ce13c9187fa8b27ad6a6404cae02aea2
The sanity check converts the linear model back to DOM, then
compares this DOM to the original DOM and rejects the deferred
if they are not equal.
The DOM creation has to be done synchronously (before we unlock
the surface), but the actual comparsion can be (and is) done
asynchronously.
To make the UI flow of the save dialog easier we just keep the
save button on the toolbar itself disabled until the sanity
check is done. Though this should finish before the user starts
editing the document (let alone start saving), we do add a class
to the button to indicate a progress cursor.
To simulate a slow sanity check, set the setTimeout in
startSanityCheck to 5000, load VE, make a change, hover the
button, and see it change from disabled + progress-cursor to
enabled after 5 seconds.
To simulate the sanity check failing, change !== to === in
the first "if" in startSanityCheck.
Bug: 47521
Bug: 50067
Change-Id: I04f71fe8e00c6257fbc953cc9de3323e24709b0f
Objectives:
* Split reference dialog (at least for now) an edit and an insert dialog
* Add reference search widget for selecting an existing source, or
choosing to add a new one
* Abstract reference names, don't allow editing them and generate them
when needed
* When editing groups, move the internal item and update all references
to it
* Resolve name conflicts when moving a reference to a new group by
generating a new list key
Bonus:
* Add getNodeGroups method to internal list
* Add getUniqueListKey method to internal list
* Add destroy functionality to ce.node to release events and references
Bug: 49733
Change-Id: Ib244ff6ad9b4cee1decfd9b9e1d3d4e9cdcfb78c
Objectives:
* Make protected CE nodes only add shields when attached to a surface
* Remove hack in reference list node used to work around this issue
Change-Id: I48d4478558b49037b80b6131e1b2e01dc4f9ec47
* Port the class preservation logic from BlockImage to InlineImage
* Add preservation for unrecognized classes
* Add the logic for collapsing spaces in the class attribute in more
places
Change-Id: I26faad7e00ab2f0a0f5d076552e56b32c692ae74
When you selected the "edit" link by tabbing, the links would expand.
In Chrome, you could then tab to the "edit source" link, but in Firefox,
the links would just contract back and you couldn't reach "edit source".
This happened because in Chrome, the "edit source" link is already
considered to be focused when the blur event happens on the "edit" link.
But in Firefox, this is not the case: the blur fires first, and only
after that does Firefox determine what to focus next.
Fixed by waiting 100ms to contract after blur, just like we do on
mouseleave.
Change-Id: I9a38b629ca5e580003d82a3dca8dbf7564486fa0
After a spirited discussion, localOverlay is getting some children.
* localOverlayBlockers - UI elements that are meant to prevent
interaction with the element. This includes Phantoms and
Highlights.
*localOverlayControls - UI elements that are meant to be
interacted with in order to modify the element. This includes
resize handles and drag marker.
*localOverlayMenus - UI elements that should always position
above all other controls. This includes the context menu.
Bug: 50159
Change-Id: Ic69c2ad275389a31c9fbaf47f3665dcdbb7ac2af
Objectives:
* Make options unable to be selected or highlighted when disabled
* Add default styles for selected state
* Fix line-height for option labels
* Use default cursor when field is disabled
Change-Id: I8a535cd6b259b092c2abce27ddb10882cdde6cf5
Objective:
* Make the escape key close dialogs, like pressing the X button
* Auto-focus the iframe on window open
Bonus:
* Add ESCAPE and SHIFT to ve.Keys and use instead of hardcoding numbers
* Use ve.Keys in some other places too
Bug: 49809
Change-Id: Ibf1fce5e24efcd83d9e1465c3cdaac24ff3fb45d
Omitting the offset causes insertMeta() to automatically use the
end offset, so we don't need to compute it in two places. The two
computations were also slightly different.
Change-Id: I55543fdd113a6a986899c093733191df948acb2e
The save dialog has z-index: 3;, which succeeds in overlaying it on the
toolbar in its normal position, but fails once the toolbar starts
floating, because the floating toolbar has z-index: 100;
In practice this meant that if you were scrolled down and the toolbar
was floating, you could open the save dialog just fine, but you
couldn't close it because its controls were below rather than on top of
the toolbar.
Hacked around this by detecting the floating-ness in the toolbarPosition
handler and setting a class on the toolbar tracker accordingly.
There may be a more elegant way to fix this; an actual UI engineer
should figure that out, not me :)
Bug: 50324
Change-Id: I8c6ab1026705d00baa20f115255d0d7e74ee72bf
This ensures that attributes and properties that are supposed to be
stripped on copypaste are actually stripped.
Bug: 49307
Change-Id: I8c90f4a0b33acba6eea3180cc077f8dc440e6e7b
Follows-up I4b9c47fd65a700a:
* Remove unused closingBracketSymbol.
* Moving veSectionEditUri and sectionEditUri inline as it is
only used once. This will allow it to be easily dereferenced
(instead of likely staying in memory due to being claimed by
remaining closures "expand" and "expandSoon" which will
continue to claim and enjoy access to this scope.
Also changed it to use the attr() callback so that we
don't access `$editLink.attr( 'href' )` twice.
* Add various comments explaining this non-obvious approach.
Though it makes sense (eventually) and more elaborate details
are in the original commitmsg, that is no excuse for a 100 line
function without a single comment, especially with all these
things going on.
* Use "shrink" instead of "contract" (seems more common in
context of web UI elements and less ambgiuous in English).
* Remove redundant toString in `new mw.Uri( veEditUri )`.
Aside from redundant, it also had more overhead (serialising
uri object to string and re-parsing). It revoked its ability
to make an efficient clone by taking the mw.Uri object as input
as opposed to having to parse it again. mw.Uri#clone does the
same internally.
* Avoid variable names like $this, that or self. Using a more
descriptive name instead.
* Re-use $closingBracket instead of using last() 3 times which
makes 3 clones of the jQuery object with the same last element
in it.
* Refactor odd swapping of closingBracket-hide and
middleBracket-clone-show.
It now keeps the original opening/edit/closing in tact and adds
devider/hidden/edit-source/outerClosing at the end.
Change-Id: I5f093f2927b769fed0c6d1a40f99e73f9b653b9a
We need to normalise titles so 'user:foo_bar' == 'User:Foo bar', and
we also need to some HTML attribute removal as links from Parsoid
will have href and rel set (again, this should be fixed in by Parsoid
when the do the merging at their end).
Bug: 49985
Change-Id: I5fb5bfc69c344ca4ce4803d7b6116074648a8d7e
They are only run in the MW test runner, where the MW dependencies
are available. Create a ve.test namespace for storing shared
test runners.
Change-Id: I079cb18b1c73614d25a12c5d6afcf0700469e52e
Objectives:
* Associate models with tools, rather than dialogs and inspectors
* Move tool/model association utilities to ve.ui.ToolFactory
* Obliterate the view registry
Notes:
The only special case for leaving modelClasses definitions in place is
for the linkInspector. It uses these for selection expansion.
Because tools can now override the static canEditModel method, we can
dynamically evaluate a model, rather than be restricted to only
comparing classes. This will be useful for disabling editors for models
that are for some reason incomplete or otherwise broken and cannot be
safely edited.
Change-Id: I7adf254990112d90f1f808593a9111afc7a116b5
Because of the z-indexes of major elements of the mono book
skin, and because the overlay containers are appended to the
body, the overlays can't be positioned between the surface and
the toolbar. Before this fix, the overlays are appearing beneath
the surface. This fix will retain proper positioning of the overlays
between the surface and the toolbar for Vector, and will overlay
everything in Monobook.
Later, we will have the overlay container more tightly integrated
with the surface to avoid this stacking problem.
Change-Id: Ibb1553099cc1e35e6a0928a99b584885508ca5b6
Convenient way to check if an object is an instance of one or more classes.
This should probably be moved to oo.js.
Change-Id: I2be55d9501cf62fde006281f1cf4813095b39b41
