Remove all manual changes to SF ranges as these are not
undoable. Instead change translate range to default to
outer expand and build functionality around that behaviour
never changing.
As translate range is always outer I don't think we need to
check for start and end crossing over?
Added more undo tests to assert these selections are maintained
properly, and added the test case to 'update' for when and undo
point is overwritten.
Insert content now results in a selection over the inserted
content. Most usages were expecting this anyway and were
followed up with an adjustRange(-length,0) which is no longer
necessary.
Noticed that the link inspector case was never being triggered
as word boundary was always expanding to at least one char (mainly
for Hanzi selection). This doesn't make much sense as single
spaces get auto selected so removed this functionality.
Split collapseRange out into collapseRangeToStart and
collapseRangeToEnd as this may be required to get the old
behaviour (range moves to end after insert).
Change-Id: I3dc0b4d00d37bad1ca3076a69b41c5f0b3fa0570
In most places we call .contains we already know the index, so we
can avoid store lookups by using .containsIndex.
Change-Id: I45a9a421473f9bec479ab8ccceceb162b7004c3a
The fixUpStack is actually redundant code and closingStack
and openingStack handle all our cases. It was causing the
insertion to try to correct balance itself in the middle
of inserting two paragraphs, causing the creation on an
empty paragraph between them.
Added a test case for the fix and other cases to make
sure removing fixUpStack hasn't caused problems.
Bug: 46800
Change-Id: I35e54165709ac56e8116359a7c3b487eecf08ff7
To help the selective serialiser we can return the original
HTML for generated content if it is unmodified.
As the output of toDomElements now depends on changes
to the dataElement we now have a 'modify' function in
the some test cases.
We also now have 'storeItems' to assert that the index-value
store is correctly populated and for loading values back
into the store for toDomElements tests.
Also make 'mw' an attribute and remove 'about' property.
Bug: 47394
Change-Id: I2bbb5d2d6a90c4eb87fa129671112c92a9b931e7
Also add detection for whether the browser is actually broken (most are,
but some, like Opera, aren't), treat <textarea> and <listing> in addition
to <pre>, and fix a bug where the function would crash if the <pre> was
empty (because .firstChild was undefined/null).
Change-Id: I541b57e9fd5c9c42d19d0a59f6e29fb43d35c9b6
addSet:
* Instead of indexing items in the store, just union the indexStore arrays
removeSet/removeNotInSet:
* difference or intersect the indexStore arrays
filter:
* push indices into the result set instead of values
simpleArrayUnion/Intersect/Difference have been created as utilities
in ve. They are prefixed 'simple' because they use object keys to
do fast in-array comparisons. This means they are limited to string
values or values which will compare as strings (e.g. numbers).
Change-Id: I079cbdfece4f6d80ec0afd61959913f13217fcb3
By removing the transaction listeners from surface fragments we
no longer have to make sure they are always manually destroyed.
In order to retain the functionality of having fragments update
with transactions elsewhere we keep a pointer to a place in the
new complete history stack in the surface. The complete history
stack records all transactions, even undone ones.
Whenever getRange is called we replay all transactions in the
complete history (in the correct order) since the fragment was
last updated.
Also in this commit:
* Updated Format/IndentationAction to test undo(). This increases
coverage of surface fragment behaviour.
* .range is always accessed by .getRange now, although as an
optimisation we can use the noCopy mode when we a sure the
returned range will not be modified.
* Added undo test to .update (previously .onTransact)
Bug: 47343
Change-Id: I9e9818da1baa8319a3002f6d74fd1aad6732a8f5
This was broken, especially in wrappers.
Changed the wrapping algorithm so that meta items are placed outside
wrappers if possible. On the left-hand side, this is already the case:
we don't open wrappers for meta items. On the right-hand side, this is
accomplished by buffering the meta items and only inserting them when
we encounter either real text (not whitespace) or the end of the wrapper.
If we're interrupted by real text, we insert the meta items with the
unmodified whitespace. If we're interrupted by the end of the wrapper,
we insert the meta items outside of the wrapper with whitespace stripped.
Internally, this is done by stripping the whitespace into the whitespace[0]
of the meta item to its right. Then when we output the meta items, we
either decide to 'restore' the whitespace, or to 'fixup' by also setting
whitespace[3] on the element before the whitespace.
Change-Id: Ibeea2a9906c4aae9fe6d284613edd6ec853ca5e7
So. It turns out that the design of SurfaceFragment is a little -
shall we say - wonky.
One of the best things about ve.dm.SurfaceFragment is its magical
ability to retain the intention of its range, even as transactions
are being processed. This ability is granted by each fragment
listening to the surface's change event, and responding by using
translateRange for each transaction that gets processed. Surface
fragments also have these clever methods that allow you to get a
fragment based on another, which makes adjusting the range easy to do
inline without having to manually store multiple fragments or
modifying the original.
This sounded good, and we seemed to all be convinced it was well
designed. But if you add a console.log( 'hello' ); to the first line
of ve.dm.SurfaceFragment.prototype.onTransact, and then start using
the bold tool on various selections of text, you will find that there
may indeed be a flaw. What you will probably realize is that the
number of times that particular line of code is being called is
disturbingly large, and increases each time you do just about anything
in the editor. What's going on? How did we get here? Read on…
It turns out that fragments are immortal. We create them, they listen
to the surface's transact event, we are done with them, but the
surface keeps on emitting events to the now long forgotten about
fragments. They continue to build up over time, never go out of scope,
and bloat the hell out of our program.
The same ended up being true of toolbars - and each time the context
menu fired up a new one the old one was left in limbo, still
responding to events, still taking up memory, but not being visible to
the user.
All of this immortality was causing strange and difficult to track
down problems. This patch fixes this by introducing a destroy method.
This method unbinds events, allowing the object to finally fall out of
scope and die - and more importantly stop receiving notifications of
changes.
This is a hack, but Ed will no doubt get this situation sorted out
properly by making fragments lazy-evaluate their selections by only
storing an identifier of the most recent transaction they were based
on, see bug 47343.
Change-Id: I18bb986001a44732a7871b9d79dc3015eedfb168
Before, it took an array of objects and translated those to indexes
using the store. Literally every caller outside of the test suite got
an array of indexes from the linear model, translated those to objects,
then passed them into the AnnotationSet constructor which translated
them right back to indexes.
The previous behavior was kind of ridiculous on its face, but the
reason we found it is because Inez was investigating the performance
degradation when bolding a line and found that half of it was due
to the hundreds of ve.getHash() calls caused by this behavior.
Change-Id: I38df8ae9f6392849dacf477ea2f804283c964417
Subbu said that cloning of attributes like data-parsoid or typeof would
cause problems for Parsoid.
Also remove the attributes object if it becomes empty, and do the same
for the internal object.
Bug: 47297
Change-Id: I428becf95c70d0ed8af5b0c408e3966dc47fd8c3
Context-sensitive nodes are HTML elements like <caption> that can only
appear in certain contexts (<table> in this case). This means that
serializing them by throwing them in a <div> and calling .innerHTML
fails, because the browser knows a <caption> can't be in a <div> and
unwraps it. jQuery's .html() function is clever though and knows to wrap
<caption> in a <table> (and has similar rules for other elements).
So use jQuery's .html() rather than manual .innerHTML stuff.
Change-Id: Id7d3eff968b3a2ba345680772f7cc32e3dcdb529
In HTML like <td>Foo <b>Bar</b></td>, the space would be stripped and
registered as trailing whitespace in the <td>, so it wouldn't be visible
in the editor and would be inserted after the </b> on the way out.
Thanks to Subbu for reporting this. This case was kind of ridiculous and
we're lucky the JRuby article contained it. To trigger the bug, you had
to have:
* a table cell
* containing unwrapped content
* consisting of
** some text
** whitespace
** open annotation (bold in my example, link in Subbu's case)
** text
** close annotation
** and nothing else
Change-Id: I2b83f02764b311a32a50956d4c8930a9394e91a4
The first run of getDomFromData() would preserve whitespace just fine,
but it blanked out the .veInternal.whitespace[1] element in certain
cases, contaminating the linear model and making the whitespace data
inconsistent. Subsequent runs of getDomFromData() would then refuse to
serialize that whitespace because the information about it was
inconsistent.
In getDomFromData(), we sometimes unset .veInternal.whitespace[1] (i.e.
set it to undefined) to prevent double processing. Because we're
potentially going to modify .veInternal, don't assign it by reference,
but copy the object.
Added tests asserting that the linear model is unchanged after calling
getDomFromData(), because that function should never modify
linear model data. This test failed in 4 cases (all whitespace-related)
before I added the copyObject() call.
Bug: 43543
Change-Id: Ic4c93510518163894201a693ab50331413715967
ve.dm.Transaction
* Replace operations are now built directly from the
linear model and automatically determine what metadata
replace information they need to include:
** retainMetadata
** replaceMetadata
** insertMetadata
ve.dm.Document
* Metadata array created empty and padded out after data parsing
as we are no longer using Document.spliceData to build it (a new
test checks for correct metadata length)
* spliceData replaced with getMetadataReplace, which instead returns
transactional steps of spliceData (retain, replace, insert)
ve.dm.MetaLinearData
* Add function for merging metadata items together. Only used
once in the code (Document.getMetadataReplace) but useful
for generating test data.
ve.dm.MetaList
* Replace operations with metadata need to calculate new offset
and indices directly, but can't be applied immediately lest they
put a metaItem out of place and affect findItem.
ve.dm.MetaItem
* Add methods to support queued moves as required by MetaList
Test files
* Updated to match new pushReplace API
* Remove any instances of Document.spliceData
* Extra check on sparse metadata array length
* Rewrite spliceData tests as getMetadataReplace tests
* Count expected cases in Transaction(Processor) tests
Bug: 46954
Change-Id: I4edad1c2dd37c723bff2792bab7d694ef17a86dc
* Create MWTemplateBlockNode & MWTemplateInlineNode (in ce and dm)
* Move Alien's 'isInline' code to ve.dm.Node.static.isHybridInline
* Move definition of ce.AlienBlock/InlineNode inside ce.Aline.js file
to match dm.AlienBlock/InlineNode and MWTemplate
* Duplicate AlienBlock/Inline styles for templates
* Create test case for inline templates
* Count test cases in ve.dm.Converter.test.js automatically
Change-Id: Id9bc7f049ea974dd5e7f8b7a66080939e0948bbd
This node stores the rendered in the index-value store, hashed on
a custom hash of the dm (type + mw) which makes it unique it its
parameters.
Bug: 46571
Change-Id: I0ab4c9f7bca207121d5b42e83c821771b6139da8
ve.ce.ImageNode.js
* Moved in generic stuff from MWImageNode
* Added drag end handler (empty, will be used soon)
ve.ce.MWImageNode.js
* Changed to inherit ImageNode
* Moved generic stuff out
ve.dm.ImageNode.js
* Added attribute extraction/preservation for src, width and height
ve.dm.MWImageNode.js
* Changed to inherit ImageNode
* Re-using ImageNode's attribute handling to extract/preserve attributes on both the image and wrapper level
Change-Id: Ied4e1ece24e6804220eac35330790f7084df55de
It's been passed in for a while, but nothing ever used it. As we know
some browsers don't like it when we create elements in the wrong
document, and this ensures we always use the correct document for
createElement().
Change-Id: Ia3d2fabe0516956105ad2b5625ed2f76c015c26e
They worked fine with just one group, but once Rob added a second group
everything came falling down.
* Index the return value of findItem() into the correct array
(list.items for all, list.groups[groupname] for groups)
* Expect null if there is something at the coordinates but it's in the
wrong group
* Keep track of the next index and expect that for forInsertion when
findItem() returned null, as well as at the end of each offset
Change-Id: I76438f583cea5694ce04fa2f4e7e88f8f8f236d1
This changes the annotation API to be the same as the node API, sans
a few boolean flags that don't apply. The APIs were different, but
there was really no good reason why, so this makes things simpler for
API users. It also means we'll be able to factor a bunch of things out
because they're now duplicated between nodes, meta items and annotations.
Linear model annotations are now objects with 'type' and 'attributes'
properties (rather than 'name' and 'data'), for consistency with elements.
They now also contain html/0/* attributes for HTML attribute preservation,
which obsoletes the htmlTagName and htmlAttributes properties.
dm.Annotation subclasses take a reference to such an object and implement
conversion using .static.toDataElement and .static.toDomElements just
like nodes do. The custom .getHash() functions are no longer necessary
because of the way HTML attribute preservation was reimplemented.
CE rendering has been moved out of dm.Annotation (it never made sense to
have CE rendering functions in DM classes, this was bothering me) and into
separate ce.Annotation subclasses. These are very similar to CE nodes in
that they have a this.$ generated based on something in the DM; the main
difference is that nodes listen to events and update themselves, whereas
annotations are static and are simply destroyed and rebuilt when they
change. This change also adds whitelisted HTML attribute rendering for
annotations, as well as class="ve-ce-FooAnnotation" attributes.
Now that annotation classes produce real DOM nodes rather than weird
objects describing HTML tags, we can't generate HTML as a string in
ce.ContentBranchNode anymore. getRenderedContents() has been rewritten
to be much more similar to the way the converter renders annotations;
in fact, significant parts of it were copied from the converter, so that
should be factored out in the future. This change actually fixes an
annotation rendering discrepancy between ce.ContentBranchNode and
dm.Converter; see the diff of ve.ce.ContentBranchNode.test.js.
ve.ce.MWEntityNode.js:
* Remove stray property
ve.dm.MWExternalLinkAnnotation.js:
* Store 'rel' attribute
ve.dm.TextStyleAnnotation.js:
* Put all the conversion logic in the abstract base class
ve.dm.Converter.js:
* Also feed annotations through getDomElementsFromDataElement() and
createDataElement()
ve.dm.Node.js:
* Fix undocumented property
ve.ce.ContentBranchNode.test.js:
* Add descriptive messages for each test case
* Compare DOM trees, not HTML strings
* Compare without all the class="ve-ce-WhateverAnnotation" clutter
ve.ui.LinkInspector.js:
* Replace direct .getHash() calls (evil!) with ve.getHash()
Bug: 46464
Bug: 44808
Change-Id: I31991488579b8cce6d98ed8b29b486ba5ec38cdc
* In matchTypeRegExps(), skip string types
** Didn't break because we currently have mixes of strings and regexes
* Combine types from rel, typeof and property rather than picking one
** Added test case in ve.dm.example that resembles actual Parsoid output
* If the element has extension-specific types, not only restrict type
matching to extension-specific types, but also require that *all* types
present on the element be matched
Change-Id: Iacf3851a0ca9081d2c813b42435484a47cec6230
Created an IndexValueStore class which can store any object and return
an integer index to its hash map.
Linear data is now stored in ve.dm.LinearData instances. Two subclasses
for element and meta data contain methods specific to those data types
(ElementLinearData and MetaLinearData).
The static methods in ve.dm.Document that inspected data at a given
offset are now instance methods of ve.dm.ElementLinearData.
AnnotationSets (which are no longer OrderedHashSets) have been moved
to /dm and also have to be instantiated with a pointer the store.
Bug: 46320
Change-Id: I249a5d48726093d1cb3e36351893f4bff85f52e2
Using element.height was returning 0 if the attribute was empty
when in fact what we mean to store is null (i.e. auto height).
This takes care of the writing of attributes in CE as jQuery
ignores an attribute-set command if the value is null.
Also in this commit I've implemented a basic toDomElements
that outputs the original HTML (code copied from AlienNode).
This stops the code from throwing an exception but will
eventually need to be rewritten to rebuild the HTML from
the attributes stored in the DM.
Bug: 56336
Change-Id: I297a1d0a07e9ebf9d0110fb1cdf266f8415f25b7
Initially just with a Wordbreak module to implement Unicode standard
on 'Default Word Boundaries'. Due to it's standaloneability this has
been written as a separate library. Non-BMP characters are currently
not supported.
Bug: 44085
Change-Id: Ieafa070076f4c36855684f6bc179667e28af2c25
Add .insertMeta() and .removeMeta() methods to insert and remove
metadata through the meta list. For convenience, there is also a
.remove() method in MetaItem that wraps around removeMeta().
Also rename insertItem() and removeItem() to addInsertedItem() and
deleteRemovedItem() to avoid confusion, and make the MetaList
constructor take a dm.Surface rather than a document so we can call
change().
Change-Id: I4b62a3109404cfd56f5de68938e1db908b03e678
Previously these were static functions in TransactionProcessor
which instantiated a TP called .process() on it. These are now
methods of ve.dm.Document.
Also moved the emission of the 'transact' event on the document from
TransactionProcessor to Document itself, and moved the tests asserting
double application is protected against from TP to Document (because
the corresponding code moved as well).
Change-Id: I7c9f22a14accaf0ba1f70d5aa4f0573bb7e677d0
