Added return boolean to ve.dm.Surface#breakpoint to indicate if
and transactions were pushed to the big stack. Use this value in
MWMetaDialog to see if we need to undo on close.
Added tests for ve.dm.Surface#breakpoint.
Bug: 49630
Change-Id: Ieb2e9e361afe057af93c4d374acc85df58bfb4c3
This makes it possible to use a static property to configure whether an
annotation should be applied to content added after it. This makes it
possible to do this for normal style stuff, but not for links.
TODO: Inez is going to add IE support for this since it inverts the
problem where the UI gets out of sync in all non-IE browsers to now make
it so it only gets out of sync in IE.
Bug: 48171
Change-Id: I5f279b06b098960be7bd4ad3f5e6f74b67e31d1a
Now comparing annotations in surface to insertionAnnotations
by comparable object to trigger pawn trick. Adding annotations
correctly to placeholder.
dm.Surface change method now uses setInsertionAnnotations()
and passes the AnnotationSet from offset-1. The set is cloned.
Added ve.ce.Surface.areAnnotationsCorrect() to compare either
annotations to the left or right to the insertionAnnotations.
Also use compareTo() and getComparableAnnotations() rather than
comparing by name, and fix SurfaceFragment.annotateContent() to
actually be selective when clearing rather than clearing everything.
Change-Id: I6116afa2e176daa0a0f2103a551501426829e2a6
The EventEmitter API we inherited from Node.js and then bastardized was
getting awkward and cumbersome. The number of uses of ve.bind was getting
out of control, and removing events meant caching the bound method in a
property. Many of the "features" of EventEmitter wasn't even being used,
some causing overhead, others just causing bloat. This change cleans up
how EventEmitter is used throughout the codebase.
The new event emitter API includes:
* emit - identical to the previous API, no longer throws an error if you
emit error without a handler
* once - identical to the previous API, still introduces a wrapper* on -
compatible with the previous API but has some new features
* off - identical to removeListener in the previous API
* connect - very similar to addListenerMethods but doesn't wrap callbacks
in closures anymore
* disconnect - new, basically the opposite of addListenerMethods
Another change that is made in this commit is mixing in rather than
inheriting from EventEmitter.
Finally, there are changes throughout the codebase anywhere
connect/disconnect could be used.
Change-Id: Ic3085d39172a8a719ce7f036690f673e59848d3a
ve.dm.Surface.js
* Allow manual truncation of the undo stack to prevent redoing something
that's been undone
Change-Id: I17534d6724fc2b325152cb2f665c6816f44232c1
By removing the transaction listeners from surface fragments we
no longer have to make sure they are always manually destroyed.
In order to retain the functionality of having fragments update
with transactions elsewhere we keep a pointer to a place in the
new complete history stack in the surface. The complete history
stack records all transactions, even undone ones.
Whenever getRange is called we replay all transactions in the
complete history (in the correct order) since the fragment was
last updated.
Also in this commit:
* Updated Format/IndentationAction to test undo(). This increases
coverage of surface fragment behaviour.
* .range is always accessed by .getRange now, although as an
optimisation we can use the noCopy mode when we a sure the
returned range will not be modified.
* Added undo test to .update (previously .onTransact)
Bug: 47343
Change-Id: I9e9818da1baa8319a3002f6d74fd1aad6732a8f5
Created an IndexValueStore class which can store any object and return
an integer index to its hash map.
Linear data is now stored in ve.dm.LinearData instances. Two subclasses
for element and meta data contain methods specific to those data types
(ElementLinearData and MetaLinearData).
The static methods in ve.dm.Document that inspected data at a given
offset are now instance methods of ve.dm.ElementLinearData.
AnnotationSets (which are no longer OrderedHashSets) have been moved
to /dm and also have to be instantiated with a pointer the store.
Bug: 46320
Change-Id: I249a5d48726093d1cb3e36351893f4bff85f52e2
@emits, @returns, @chainable & @throws should always appear
in that order, according to CODING.md.
Change-Id: I9b192e018a028a8b32730c288cc4e3108800fb58
Previously these were static functions in TransactionProcessor
which instantiated a TP called .process() on it. These are now
methods of ve.dm.Document.
Also moved the emission of the 'transact' event on the document from
TransactionProcessor to Document itself, and moved the tests asserting
double application is protected against from TP to Document (because
the corresponding code moved as well).
Change-Id: I7c9f22a14accaf0ba1f70d5aa4f0573bb7e677d0
* Document them consistently between secetions Inheritance and
Static Properties under their own (new) section Events.
* Removed any quotes or brackets around the event name in existing
@emit annotations
Search: @emit.*['"{}(){}]
* For every call to this.emit() anywhere, added @emits.
* Fixed all warnings for references to undefined events
(introduced as a result of the previous point).
Event handler parameter documented based on the emit() call
and actual handlers using the event. Usually the latter is
more elaborate.
* Extend coverage of jQuery as needed
(copied from mwcore/maintenance/jsduck/external.js
written by me, hereby implicitly and explicitly released under MIT).
Specifics
* ve.ce.Surface#onContentChange: Fixed type of range from Object to ve.Range.
* ve.ce.SurfaceObserver#poll: Fix syntax for code from {} to `backticks`.
* ve.ui.Toolbar#onContextChange: Doesn't actually emit "clearState" event.
Removed #onClearState in Tool, ButtonTool and DropdownTool.
Bug: 45872
Change-Id: Id879aa769b2c72d86a0322e75dddeb868211ce28
The normalize method doesn't need to be explicitly called anymore because there's not any code that changes the properties of a range directly anymore.
A good way to prove it's not needed anymore is to move the normalization logic to the constructor and then add "console.log(this.from <= this.to );" to the normalize method - you will find that it's never actually doing anything at all because the range was normalized by the constructor.
ve.Range
* Moved normalization logic to constructor
* Removed calls to normalize method
* Removed normalize method
* Simplified documentation for flip method
* Whitespace fixes
ve.Document, ve.dm.Transaction, ve.dm.Surface, ve.dm.Document, ve.ce.Surface
* Removed calls to range.normalize
* Switched to using range.isCollapsed instead of comparing properties directly
Change-Id: I80bfd06f88579c34dce2083c2b70d63ab92f1275
* Made method descriptions imperative: "Do this" rather than "Does this"
* Changed use of "this object" to "the object" in method documentation
* Added missing documentation
* Fixed incorrect documentation
* Fixed incorrect debug method names (as in those VeDmClassName tags we add to functions so they make sense when dumped into in the console)
* Normalized use of package names throughout
* Normalized class descriptions
* Removed incorrect @abstract tags
* Added missing @method tags
* Lots of other minor cleanup
Change-Id: I4ea66a2dd107613e2ea3a5f56ff54d675d72957e
See CODING.md for how to run it.
Mistakes fixed:
* Warning: Unknown type function
-> Function
* Warning: Unknown type DOMElement
-> HTMLElement
* Warning: Unknown type DOM Node
-> HTMLElement
* Warning: Unknown type Integer
-> Mixed
* Warning: Unknown type Command
-> ve.Command
* Warning: Unknown type any
-> number
* Warning: Unknown type ve.Transaction
-> ve.dm.Transaction
* Warning: Unknown type ve.dm.AnnotationSet
-> ve.AnnotationSet
* Warning: Unknown type false
-> boolean
* Warning: Unknown type ve.dm.AlienNode
ve.dm doesn't have a generic AlienNode like ve.ce
-> Unknown type ve.dm.AlienInlineNode|ve.dm.AlienBlockNode
* Warning: Unknown type ve.ve.Surface
-> ve.ce.Surface
* ve.example.lookupNode:
-> Last @param should be @return
* ve.dm.Transaction.prototype.pushReplace:
-> @param {Array] should be @param {Array}
* Warning: ve.BranchNode.js:27: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
* Warning: ve.LeafNode.js:21: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
Differences fixed:
* Variadic arguments are like @param {Type...} [name]
instead of @param {Type} [name...]
* Convert all file headers from /** to /*! because JSDuck tries
to parse all /** blocks and fails to parse with all sorts of
errors for "Global property", "Unnamed property", and
"Duplicate property".
Find: \/\*\*([^@]+)(@copyright)
Replace: /*!$1$2
* Indented blocks are considered code examples.
A few methods had documentation with numbered lists that were
indented, which have now been updated to not be intended.
* The free-form text descriptions are parsed with Markdown,
which requires lists to be separated from paragraphs by an
empty line.
And we should use `backticks` instead of {braces} for inline
code in text paragraphs.
* Doc blocks for classes and their constructor have to be
in the correct order (@constructor, @param, @return must be
before @class, @abstract, @extends etc.)
* `@extends Class` must not have Class {wrapped}
* @throws must start with a {Type}
* @example means something else. It is used for an inline demo
iframe, not code block. For that simply indent with spaces.
* @member means something else.
Non-function properties are marked with @property, not @member.
* To create a link to a class or member, in most cases the name
is enough to create a link. E.g. Foo, Foo.bar, Foo.bar#quux,
where a hash stands for "instance member", so Foo.bar#quux,
links to Foo.bar.prototype.quux (the is not supported, as
"prototype" is considered an implementation detail, it only
indexes class name and method name).
If the magic linker doesn't work for some case, the
verbose syntax is {@link #target label}.
* @property can't have sub-properties (nested @param and @return
values are supported, only @static @property can't be nested).
We only have one case of this, which can be worked around by
moving those in a new virtual class. The code is unaltered
(only moved down so that it isn't with the scope of the main
@class block). ve.dm.TransactionProcessor.processors.
New:
* @mixins: Classes mixed into the current class.
* @event: Events that can be emitted by a class. These are also
inherited by subclasses. (+ @param, @return and @preventable).
So ve.Node#event-attach is inherited to ve.dm.BreakNode,
just like @method is.
* @singleton: Plain objects such as ve, ve.dm, ve.ce were missing
documentation causing a tree error. Documented those as a
JSDuck singleton, which they but just weren't documented yet.
NB: Members of @singleton don't need @static (if present,
triggers a compiler warning).
* @chainable: Shorthand for "@return this". We were using
"@return {classname}" which is ambiguous (returns the same
instance or another instance?), @chainable is specifically
for "@return this". Creates proper labels in the generated
HTML pages.
Removed:
* @mixin: (not to be confused with @mixins). Not supported by
JSDuck. Every class is standalone anyway. Where needed marked
them @class + @abstract instead.
Change-Id: I6a7c9e8ee8f995731bc205d666167874eb2ebe23
ve.Range
* Rewrote truncate so that it works as expected, truncation should always reduce the length using the start/end values, not the from/to values
ve.ui.Inspector
* Added a comment about where the name argument to onBeforeInspectorOpen comes from, since it's a little bit confusing on first read (and I wrote it!)
* Calling onInitialize, onOpen and onClose methods directly, since we need to control the before or after-ness of listeners getting in there and doing their stuff - plus it's more direct
* Removed onRemove stub, which is never actually called
* Added before/after versions of initialize, open and close events
* Got rid of recursion guard since we don't need it anymore thanks to changes made in ve.dm.Surface (see below)
ve.ui.Context
* Updated event names to deal with new before/after naming of initialize, open and close events
* Removed fade-in logic since fading in doesn't even work anymore - since now we now annotate first, then open the inspector, the menu will actually exist and be open when we open the inspector even though you don't see it because it's quickly obscured
ve.ui.LinkInspector
* Made fragments non-auto selecting, in the case of onInitialize we actually call select(), which is silly since we were using an auto-selecting fragment - it's clear that this was a mistake
ve.dm.Surface
* Moved locking (polling stop and start) to the far outside edges of the change method
* I need a lot of eyes and testing on this change, it seems OK to me, but I'm suspicious that it may have side effects
* What was happening is that selection changes were being applied and then the poll was picking them up, and then the selection was coming in again as a change, but it wasn't a change at all, it was just feedback - this change event was then closing the inspector the instant it was opened - the odd part was that this only occurred when you selected backwards, which seems to be caused by the range being normalized, so it looked like a new selection even though it wasn't
ve.dm.Document
* trimOuterSpace from Range didn't consider annotated spaces to be spaces, by using the [0] trick (first character of a plain text character string or first element in an annotated character's array both are the character's value - but elements don't have a property named '0' so it skips those safely as well) we can always get the right value for comparison
Change-Id: I0873d906c058203b83b8d4bbe5a4b274f05a26fd
The fix for bug 40339 supposedly modified when we emit contextChange events so that when the node changed, even if the context was the same, we consider it a context change (such as changing the heading level).
Unfortunately I was mentally absent when I wrote the patch and all it actually does it emit more select events.
Basically cb4877b0d0 - which does indeed fix the bug - doesn't do what it's commit message describes, but this fixes it.
Change-Id: I99d74f9ab0ddec15df41320389fe83de9b8b8d1e
Detecting contextChange events was making assumptions about the previous state, and causing a mess of problems.
Solution: detect contextChange events in a smarter way.
We also now emit contextChange event when moving to a different node. This helps fix other issues because it's possible for the selection to be the same, but the node at that range to change, and that's a context change for sure. Example would be changing the heading level.
Change-Id: I99d6fa94fae76aa940077abc9b5beacd38eb7b0b
The contextChange event is fired when:
* Changes to insertion annotations
* Changes to which nodes are selected (start/end nodes have changed)
* Attributes have changed on any element (it's probably more expensive to detect if the changes are relevant than to just emit the event and let listeners do their thing)
This fixes most of the strange behavior with the toolbar not updating properly.
Change-Id: I5321d2e30bebd80987e0c779a9d8e061d8aa80bc
ve.dm.SurfaceFragment
* Removed flawed implementation of word mode for expandRange method and made use of new getNearestWordBoundary method in the document model
ve.dm.Surface
* Got rid of useInsertionAnnotations, which allowed disabling and enabling of insertion annotations - this isn't needed anymore because it was just a dirty hack around the improper starting and stopping of surface observer that's now solved more elegantly by emitting lock and unlock before committing or rolling back transactions
* Get annotations from the first character of the selection if the selection is not collapsed
* Only emit annotationChange events if it really changed
ve.dm.Document
* Added getNearestWordBoundary method which performs the work behind the surface fragment expandRange word method
ve.ce.SurfaceObserver
* Allow using an initial selection to avoid the observer thinking the selection has changed just because it started out with null
* Only emit selectionChange event if there was a meaningful change
ve.ce.Surface
* (bug 42279) Only annotate characters if insertion annotations are not empty
* Remove manual locking and unlocking, this is now done inside the change method of surface model
* Provide an initial selection to surface observer when we clear it
* Remove enabling and disabling of insertionAnnotations, this isn't needed anymore
* Stop/start observer on key presses that execute actions as well as those that have no special handling
ve.ce.Document
* Make getNodeFromOffsetand getSlugAtOffset return null when given -1 as an offset
Change-Id: Ibf6b26de299e54ae8688a2653bf5d5538927f8c3
ve.ui.Inspector
* Removed disabled state and interfaces - this isn't needed
* Renamed prepareSelection to onInitialize
* Using event emitter to run onInitialize, onOpen and onClose methods
* Left removal up to the child class to handle in the onClose method
* Replaced calls on context to close inspector to calling close directly
* Renamed prepareSelection stub to onInitialize
* Emitting initialize event from within the open method
* Added recursion guarding to close method
* Changed the close method's argument to be remove instead of accept - the more common case is to save changes, and the only time you wouldn't save changes is if you were to remove the annotation
* Moved focus restore to close method
ve.ui.Context
* Moved the majority of the code in openInspector and closeInspector to event handlers for onInspectorOpen and onInspectorClose
* Updated calls to closeInspector re: accept->remove argument change
ve.ui.LinkInspector
* Renamed prepareSelection to onInitialize and rewrote logic and documentation
* Removed unused onLocationInputChange method
* Moved restore focus (now it's in the inspector base class)
ve.dm.SurfaceFragment
* Added word mode for expandRange
ve.dm.Surface
* Added locking/unlocking while processing transactions - this was not an issue before because this was effectively being done manually throughout ce (which needs to be cleaned up) but once we started using the content action to insert content dm and ce started playing off each other and inserting in a loop - we already do this for undo/redo so it makes sense to do it here as well
ve.InspectorAction
* Updated arguments re: close method's accept->remove argument change
Change-Id: I38995d4101fda71bfb2e6fe516603507ce820937
AnnotationAction and SurfaceFragment now use insertAnnotations.
ve.dm.Surface.test
* Removed test for annotate method (not needed anymore)
ve.dm.SurfaceFragment
* Now using getInsertionAnnotations method
* Added support for modifying insertion annotations when annotating a zero-length selection
ve.dm.Surface
* Moved in insertion annotations state from document model
* Added insertion annotation interface (enable, disable, areEnabled, get, set, add, and remove)
* Simplified handling of annotations on change
* Removed annotate method (not used anymore)
ve.dm.Document
* Removed insertion annotations (moved it to surface model)
ve.ce.Surface
* Cleaned up handleInsertion and changed it to use the insertion annotations interface on the surface model
ve.AnnotationAction
* Moved insertion annotation handling out of here since it's now included in the surface fragment
Change-Id: I047d656acf7fa1c63f726ca2b0801e1476f84f96
Will be used by the history tools in a future commit, providing
a reasonable interface to this information rather than the tool
reaching into private members.
Change-Id: I0472349968e9b48ec17eb47b6845ec9ccf3811e2
Exception was caused by passing -1 to getAnnotationsFromOffset(). So
check for -1 before passing it in; getNearestContentOffset() can
legitimately return -1 if there are no content offsets in the document,
which occurs when the document is empty.
I was originally going to change getNearestContentOffset(start - 1, -1)
to getRelativeContentOffset(start, -1), but Inez correctly pointed out
that that would have unwanted results when near an inline node.
Change-Id: Ife4b497b1c5fd04d411bb25cea99e6ea2abf146f
Previously, Undo used a transaction's lengthDifference to calculate the selection to display after the transaction was undone. Now, translateOffset with the reversed boolean set to true will properly translate the inverse of a transaction's selection change. Fixes bug #40538
Change-Id: I110bc0cbb5824547842efd391b9f2948b037b758
This allowed me to move ve.ce.Surface particulars (such as the starting, stopping and clearing of polling) out of the UI code.
Also cleaned up some switch statements.
Change-Id: I7b85e42a4e01f8d76237d995e25275f2424541ea
Previously, we were looking one offset to the left to load the insertAnnotations. This would fail at the beginning of a document that began with a slug, and probably other cases too. Now using getRelativeContent offset.
Change-Id: I31b24e2ccfa9fda2ce7fb19d1221f8708a96083f
* Added documentation for ve.AnnotationSet
* Replaced uses of "// Inheritance" with "// parent Constructor"
* Added "// Mixin constructor" where needed
* Added missing section comments like "/* Static Methods */"
* Cleaned up excessive newlines (matching /\n\n\n/g)
* Put unnecessarily multi-line statements on a single line
Change-Id: I2c9b47ba296f7dd3c9cc2985581fbcefd6d76325
* For the most common case:
- replace ve.extendClass with ve.inheritClass (chose slightly
different names to detect usage of the old/new one, and I
like 'inherit' better).
- move it up to below the constructor, see doc block for why.
* Cases where more than 2 arguments were passed to
ve.extendClass are handled differently depending on the case.
In case of a longer inheritance tree, the other arguments
could be omitted (like in "ve.ce.FooBar, ve.FooBar,
ve.Bar". ve.ce.FooBar only needs to inherit from ve.FooBar,
because ve.ce.FooBar inherits from ve.Bar).
In the case of where it previously had two mixins with
ve.extendClass(), either one becomes inheritClass and one
a mixin, both to mixinClass().
No visible changes should come from this commit as the
instances still all have the same visible properties in the
end. No more or less than before.
* Misc.:
- Be consistent in calling parent constructors in the
same order as the inheritance.
- Add missing @extends and @param documentation.
- Replace invalid {Integer} type hint with {Number}.
- Consistent doc comments order:
@class, @abstract, @constructor, @extends, @params.
- Fix indentation errors
A fairly common mistake was a superfluous space before the
identifier on the assignment line directly below the
documentation comment.
$ ack "^ [^*]" --js modules/ve
- Typo "Inhertiance" -> "Inheritance".
- Replacing the other confusing comment "Inheritance" (inside
the constructor) with "Parent constructor".
- Add missing @abstract for ve.ui.Tool.
- Corrected ve.FormatDropdownTool to ve.ui.FormatDropdownTool.js
- Add function names to all @constructor functions. Now that we
have inheritance it is important and useful to have these
functions not be anonymous.
Example of debug shot: http://cl.ly/image/1j3c160w3D45
Makes the difference between
< documentNode;
> ve_dm_DocumentNode
...
: ve_dm_BranchNode
...
: ve_dm_Node
...
: ve_dm_Node
...
: Object
...
without names (current situation):
< documentNode;
> Object
...
: Object
...
: Object
...
: Object
...
: Object
...
though before this commit, it really looks like this
(flattened since ve.extendClass really did a mixin):
< documentNode;
> Object
...
...
...
Pattern in Sublime (case-sensitive) to find nameless
constructor functions:
"^ve\..*\.([A-Z])([^\.]+) = function \("
Change-Id: Iab763954fb8cf375900d7a9a92dec1c755d5407e
[jshint]
ce/ve.ce.Surface.js: line 670, col 9, Too many var statements.
ce/ve.ce.Surface.js: line 695, col 6, Missing semicolon.
ce/ve.ce.Surface.js: line 726, col 22, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 726, col 41, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 733, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 734, col 24, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 1013, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 1019, col 17, Too many var statements.
ce/ve.ce.Surface.js: line 1023, col 18, Too many ar statements.
ce/ve.ce.Surface.js: line 1027, col 13, Too many var statements.
dm/annotations/ve.dm.LinkAnnotation.js: line 70, col 52, Insecure '.'.
dm/ve.dm.Converter.js: line 383, col 29, Empty block.
dm/ve.dm.Converter.js: line 423, col 33, Empty block.
Commands:
* jshint .
* ack '(if|else|function|switch|for|while)\('
* Sublime Text 2:
Find(*): (if|else|function|switch|for|while)\(
Replace: $1 (
* ack ' ' -Q # double spaces, except in certain comments
Change-Id: I8e34bf2924bc8688fdf8acef08bbc4f6707e93be
Make ve.dm.Surface.change accept array of transactions as a parameter (instead of just one) and use it in complex content removal (handled in Surface view).
Change-Id: I453b3606cefe140db206f5a2d2c9036bcbd639c9
This makes a lot more sense when you start making a surface fragment from a new surface, because a null range would seem to have unpredictable behavior.
Change-Id: I85210878deca3067960fa4a14e2a760e55f67e4e
Refactor:
* ve.indexOf
Renamed from ve.inArray.
This was named after the jQuery method which in turn has a longer
story about why it is so unfortunately named. It doesn't return
a boolean, but an index. Hence the native method being called
indexOf as well.
* ve.bind
Renamed from ve.proxy.
I considered making it use Function.prototype.bind if available.
As it performs better than $.proxy (which doesn't use to the native
bind if available). However since bind needs to be bound itself in
order to use it detached, it turns out with the "call()" and
"bind()" it is slower than the $.proxy shim:
http://jsperf.com/function-bind-shim-perf
It would've been like this:
ve.bind = Function.prototype.bind ?
Function.prototype.call.bind( Function.prototype.bind ) :
$.proxy;
But instead sticking to ve.bind = $.proxy;
* ve.extendObject
Documented the parts of jQuery.extend that we use. This makes it
easier to replace in the future.
Documentation:
* Added function documentation blocks.
* Added annotations to functions that we will be able to remove
in the future in favour of the native methods.
With "@until + when/how".
In this case "ES5". Meaning, whenever we drop support for browsers
that don't support ES5. Although in the developer community ES5 is
still fairly fresh, browsers have been aware for it long enough
that thee moment we're able to drop it may be sooner than we think.
The only blocker so far is IE8. The rest of the browsers have had
it long enough that the traffic we need to support of non-IE
supports it.
Misc.:
* Removed 'node: true' from .jshintrc since Parsoid is no longer in
this repo and thus no more nodejs files.
- This unraveled two lint errors: Usage of 'module' and 'console'.
(both were considered 'safe globals' due to nodejs, but not in
browser code).
* Replaced usage (before renaming):
- $.inArray -> ve.inArray
- Function.prototype.bind -> ve.proxy
- Array.isArray -> ve.isArray
- [].indexOf -> ve.inArray
- $.fn.bind/live/delegate/unbind/die/delegate -> $.fn.on/off
Change-Id: Idcf1fa6a685b6ed3d7c99ffe17bd57a7bc586a2c
Also added some checks in content branch conversion to make sure that converting from and to the same thing results in a no-op
Change-Id: Ie47520d666e45a77d12c7ebb9457aef7ab6b8097
