ApiVisualEditor
* Including notices in response to parse actions
ve.init.mw.ViewPageTarget
* Added styles for editNoticeButton and editNotices
ve.init.mw.ViewPageTarget
* Added toolbarEditNoticeButton and toolbarEditNotices
* Combined toolbarEditNoticeButton and toolbarSaveButton setup
* Moved toolbar buttons setup to onLoad (it could vary per-parse now)
* Added tearDownToolbarButtons which fires on deactivate
* Renamed some instances of teardown to tearDown
* Added click handler for toolbarEditNoticeButton
* Added toolbarEditNotices setup method, called on load
* Made notices fade in and out, in by default on load if any
* Made notices hide when save dialog is opened
ve.init.mw.Target
* Added storing of notices on parse
icons, alert, ve.ui-Icons
* Added alert icon
VisualEditor.i18n, VisualEditor
* Added notices button message
Change-Id: I581bf5a005a9c18422f952d71064d17d0ba9b540
* Permits longer page titles in suggestions without changing
the width of the dropdown.
* Addresses (Bug 40675)
Change-Id: Ie76a551970a040074b86c49bb44bda640ecd4845
The logic in ve.ui.LinkInspector.onUpdate was very flawed. This patch makes it so:
* When something happens, if there's an inspector open then so long as the selection hasn't changed the inspector is updated (such as the window being resized)
* If the selection does change, the inspector is closed
* If there's no inspector open, we try to show a menu of available inspectors
Change-Id: I859123a5fcd36bc2afb2e578f81f30a944c8583a
Allows suggest tool to open immediately and provide new page and
external link suggestions for link inspector.
Resolves (Bug 42341)
Change-Id: I79bc3e31033b5c38c3ed6ab23e601476cb17ba8f
The contextChange event is fired when:
* Changes to insertion annotations
* Changes to which nodes are selected (start/end nodes have changed)
* Attributes have changed on any element (it's probably more expensive to detect if the changes are relevant than to just emit the event and let listeners do their thing)
This fixes most of the strange behavior with the toolbar not updating properly.
Change-Id: I5321d2e30bebd80987e0c779a9d8e061d8aa80bc
ve.ui.Inspector
* Removed disabled state and interfaces - this isn't needed
* Renamed prepareSelection to onInitialize
* Using event emitter to run onInitialize, onOpen and onClose methods
* Left removal up to the child class to handle in the onClose method
* Replaced calls on context to close inspector to calling close directly
* Renamed prepareSelection stub to onInitialize
* Emitting initialize event from within the open method
* Added recursion guarding to close method
* Changed the close method's argument to be remove instead of accept - the more common case is to save changes, and the only time you wouldn't save changes is if you were to remove the annotation
* Moved focus restore to close method
ve.ui.Context
* Moved the majority of the code in openInspector and closeInspector to event handlers for onInspectorOpen and onInspectorClose
* Updated calls to closeInspector re: accept->remove argument change
ve.ui.LinkInspector
* Renamed prepareSelection to onInitialize and rewrote logic and documentation
* Removed unused onLocationInputChange method
* Moved restore focus (now it's in the inspector base class)
ve.dm.SurfaceFragment
* Added word mode for expandRange
ve.dm.Surface
* Added locking/unlocking while processing transactions - this was not an issue before because this was effectively being done manually throughout ce (which needs to be cleaned up) but once we started using the content action to insert content dm and ce started playing off each other and inserting in a loop - we already do this for undo/redo so it makes sense to do it here as well
ve.InspectorAction
* Updated arguments re: close method's accept->remove argument change
Change-Id: I38995d4101fda71bfb2e6fe516603507ce820937
When you leave the inspector by changing the selection, we need to apply changes to the old selection.
ve.ui.Inspector
* Added initialSelection
* Change getMatchingAnnotations to use a given fragment rather than generating it's own
* Set initialSelection on open
ve.ui.Context
* Make hiding the context accept changes
ve.ui.LinkInspector
* Passing a fragment into getMatchingAnnotations now
* Using fragment API instead of actions API to control the range of the fragment
Change-Id: If6c8845285d87d0f144b15d50c38e192c797be59
When the link inspector is used to create a new annotation, the text is annotated with the default link target derived from the selected text. Then if the inspector is used to change that value, yet another transaction is processed when the inspector is closed.
To avoid having to press undo 2x, this change makes the inspector undo it's first change before applying the changed annotation.
This change also introduces insert, remove and select content actions.
Change-Id: I3e29189158fb01336d6b053bc2a8bda2a91a0a46
ve.AnnotationAction
* Added filter to the clearAll method to allow clearing all matching annotations only
ve.dm.Document
* Some variable renaming for consistency
ve.dm.SurfaceFragment
* Added truncateRange method
* Added annotation scope to expandRange method
* Added support for passing an annotation object into annotateContent method
* Switched to using name instead of type in annotateContent method to match the ve.dm.Annotation class
* Fixed logic in annotation mode of expandSelection so that expansion only takes place if the annotation is found
ve.ui.LinkInspector
* Moved most of the functionality elsewhere
* General reorganization
* Changed setOverlayPosition to accept 2 arguments instead of an object with 2 properties and renamed it to positionOverlayBelow
* Check for annotation object before extracting target information from it
* Initialize default target as empty string to avoid undefined being cast to a string and the default target becoming 'undefined'
icons.ai, inspector.png, inspector.svg
* Added generic inspector icon which will be used when a custom icon is not specified in future inspector subclasses
ve.ui.Inspector.Icons
* Added inspector icon
* Renamed clear icon to remove to match it's actual image
ve.ui.Context
* Greatly simplified the interface, reducing the number of methods by inlining a few things and combining others
* Now always listening to resize events on the window rather than only while document is focused
* Not listening to scroll events anymore, they used to affect the top/bottom positioning of the menu which we don't do anymore
* Lots of cleanup and reorganization
* No need to fallback to empty array since getInspectorsForAnnotations does so already
* Only consider fully-covered annotations for inspectors
ve.ui.Frame
* Simplified the constructor by introducing the createFrame method
* General cleanup
* Typo fixes
ve.ui.Inspector
* Generalized lots of functionality previously located in the link inspector class which will be useful to all inspectors (such as title, clear button, saving changes, etc.)
* Added setDisabled and isDisabled methods to manage CSS changes and avoid needing to check the CSS to determine the state of the inspector (storing state in the view is evil)
* Added getMatchingAnnotations method for convenience
* Added prepareSelection stub
* Lots of cleanup and documentation
* Type pattern is now defined in base class
* Added stubs for onOpen and onClose with documentation so that subclass authors know what these methods do
* Removed checks for onOpen or onClose methods since they are now noop stubs and are always there
* Added stub and removed checks for onRemove
* Made esc key close and accept - the illusion is supposed to be that the link changes are applied instantly, even though they are only updated when you close, so all closing except for when removing should apply changes - i.e. esc is now equal to back rather than being a special function that doesn't have an associated affordance
* Only consider fully-covered annotations when getting matching annotations
ve.ui.InspectorFactory
* Depending on type pattern now since it's always there
* Added getInspectorsForAnnotations method
* Return empty array if annotation set is empty
VisualEditor, VisualEditor.i18n
* Added default inspector message
Change-Id: I1cc008445bcbc8cba6754ca4b6ac0397575980d5
The port of mousetrap wasn't really what we needed. This is much simpler, matches the rest of our code, and does exactly what we need.
Change-Id: I67f413e097fc2d4078336edb14dd9440e771f196
* Added selectionStart and selectionEnd events to ve.ce.Surface
* Switched from debouncing model change events to just ignoring
model change events while the user is in selection mode
(dragging mouse or pressing shift+arrow keys)
* Fixed bug with callout appearing on resize.
Change-Id: I3bb9952867a983a4f7612964ff719a1179dd0fc6
* Allow inspector to open with 0 length selection.
* Allow context menu to open with 0 length selection.
* Fixed bug in doc.getAnnotationsFromRange on zero length selection:
Method now returns annotations from start vs empty annotation set.
Change-Id: I3937c5c2824c7396d0c3ee11c13ffecdbed6052a
* Moved to tool specific configuration to static properties (left tool instance specific stuff in the constructors)
* Added documentation for tool configurations
* Centralized typePattern matching for inspectors
Change-Id: Ieacf61b320c10fd37ea69a05e543313fa990b403
* Rewrite of all tools, dramatically simplifiying them and decreasing
duplication
* Tools are now created using a tool factory instead of
a make-shift facility built into the toolbar
* All UI object have a surface or a toolbar reference instead of a
surface view
Change-Id: I589ecba36bf715b452d03c8fd5c0547dc3c1dc61
* Only show the inspector if the selected text has an inspectable annotation
* Replace the inline menu with a toolbar containing inspectable annotations
* Change the appearance of the inspector to match new mockups
* Add the trash can icon for removing annotations
* Move iframe handling code into a class that manages all that nonsense
Change-Id: I840f72426f9a9e50054a28de950393f0e9913153
Based on https://github.com/ccampbell/mousetrap.
Cleaned up to fit our coding standards, pass JSHint, and assume
jQuery's fixes where possible (e.g. no need for an addEvent
utility, no need for filling e.target, e.which, etc. cross-browser
which jQuery.Event already does).
Initially all were local functions in the constructor, but to
allow some customisations in subclasses moved various methods
to the prototype instead and marked with @private.
Really, only .register() must be called from the outside. The rest
assumes normalisation etc. or might break things if called
incorrectly.
Change-Id: Ic69a3c70759052094aefbeab623d885f8b118e14
* Added comments to classes and methods
* Quieted a jshint warning
* Broke some long lines
* Replaced instances of "var\t" with "var "
Change-Id: I1d617ed9e5180f1a3dff42078fb5debb5d718407
This allowed me to move ve.ce.Surface particulars (such as the starting, stopping and clearing of polling) out of the UI code.
Also cleaned up some switch statements.
Change-Id: I7b85e42a4e01f8d76237d995e25275f2424541ea
* Added some new icons (to be used soon in the inspector redesign)
* Added right-to-left icons for lists
* Renamed some icons for future RTL use
Change-Id: I10e3e3fcda82786e3064176e7eefe211b88db95c
Surface model annotate method previously cleared basic tool annotation objects.
Now that bold and other annotations have htmlAttributes from parsoid,
we must gather annotations by type from selection and iterate through
to properly clear.
Change-Id: Id53bf5733078524ae5aac376e01b9679eb8c32df
Rather than each tool requesting annotations, and nodes pertaining to selection,
Emitted event supplies annotations and nodes to each tool's update method.
Using select vs. of traverseLeafNodes for code optimization.
Better documentation for updateTools()
Removed unneeded code.
Change-Id: I7c0baa1cc0f7fb731d6e28b175a76e931e9e2961
* Added documentation for ve.AnnotationSet
* Replaced uses of "// Inheritance" with "// parent Constructor"
* Added "// Mixin constructor" where needed
* Added missing section comments like "/* Static Methods */"
* Cleaned up excessive newlines (matching /\n\n\n/g)
* Put unnecessarily multi-line statements on a single line
Change-Id: I2c9b47ba296f7dd3c9cc2985581fbcefd6d76325
* Commands for Sublime:
Find*: "(\* @[a-z]+) ([^{].*) \{(.*)\}"
Replace: "$1 {$3} $2"
Save all && Close all
Find: " function("
Replace: " function ("
Save all && Close all
Find: "Intialization"
Replace: "Initialization"
Save all && Close all
* Consistent use of types (documented in CODING.rm):
- Merged {Integer} into {Number}.
- Merged {DOM Node} into {DOMElement}.
* Remove work-around /*jshint newcap: false */ from ve.js
Calling Object() as a function to to use the internal
toObject no longer throws a newcap warning in JSHint.
It only does that normal functions now .
(e.g. var a = Cap(); or var a = new uncap();)
* Add missing annotations (@static, @method, ..).
* Remove unused variables
* Remove null-assignments to variables that should just be
undefined. There's a few variables explicitly set to null
whereas they are set a few lines under and not used otherwise
(e.g. 'tx' in ve.ce.Surface.prototype.onPaste)
Change-Id: I0721a08f8ecd93c25595aedaa1aadb0e08b83799
Detecting page status in a similar way as WikiEditor inspector.
Disabled accept button now behaves appropriately.
Accept button status is now evaluated on enter or submit.
Change-Id: Ibfef6ffd87cb9a71e37242d6214d0f8e3af2e2c0
