When editing a new page, or loading an empty page into the editor, the
converter generates a paragraph so the document isn't completely empty.
This paragraph is then unwrapped on the way out, potentially destroying
change markers and generally producing strange HTML output.
Mark this paragraph with generated=empty rather than generated=wrapper,
and only unwrap it on the way out if it's still empty. This means we
cleanly round-trip empty documents (and empty list items and the like),
but if the user enters text, we create a paragraph like we're supposed
to.
Change-Id: Id0241221a67b769445676b833b5741320d99ea5f
When alienating in wrapping mode, we need to look at the type of tag to
decide whether to create a wrapped alienInline, or to interrupt the
paragraph for an alienBlock.
This was being done just fine for the general alienation case
(unrecognized tag), but not for the special cases (mw:unrecognized,
about groups).
* Centralize the logic for ending a wrapper in stopWrapping()
* Move the wrapping-contingent block/inline detection logic into
createAlien()
* Simplify the terrible if statement to decide whether a future decision
requires us to stop wrapping. Instead, detect the cases in each code
path separately and call stopWrapping() as appropriate
* Add tests
Change-Id: I4054584ae05e7d5daa71edead3e6a6588cf5d3bb
ve.ui.Inspector
* Removed disabled state and interfaces - this isn't needed
* Renamed prepareSelection to onInitialize
* Using event emitter to run onInitialize, onOpen and onClose methods
* Left removal up to the child class to handle in the onClose method
* Replaced calls on context to close inspector to calling close directly
* Renamed prepareSelection stub to onInitialize
* Emitting initialize event from within the open method
* Added recursion guarding to close method
* Changed the close method's argument to be remove instead of accept - the more common case is to save changes, and the only time you wouldn't save changes is if you were to remove the annotation
* Moved focus restore to close method
ve.ui.Context
* Moved the majority of the code in openInspector and closeInspector to event handlers for onInspectorOpen and onInspectorClose
* Updated calls to closeInspector re: accept->remove argument change
ve.ui.LinkInspector
* Renamed prepareSelection to onInitialize and rewrote logic and documentation
* Removed unused onLocationInputChange method
* Moved restore focus (now it's in the inspector base class)
ve.dm.SurfaceFragment
* Added word mode for expandRange
ve.dm.Surface
* Added locking/unlocking while processing transactions - this was not an issue before because this was effectively being done manually throughout ce (which needs to be cleaned up) but once we started using the content action to insert content dm and ce started playing off each other and inserting in a loop - we already do this for undo/redo so it makes sense to do it here as well
ve.InspectorAction
* Updated arguments re: close method's accept->remove argument change
Change-Id: I38995d4101fda71bfb2e6fe516603507ce820937
<span typeof="mw:Entity"> tags are now correctly represented in the
model, and rendered in CE. There are still issues with cursor movement
etc. in CE.
Because the prioritization mechanism for annotations vs nodes is broken
in the current "node API", I had to hack two special cases for mw:Entity
into the converter. I also had to change the converter to ignore the
children of inline nodes (this was a legitimate bug, but had never come
up before).
Change-Id: Ib9f70437c58b4ca06aa09f7272bf51d9c41b18f2
* Make converter generate meta nodes with 'style': 'comment'
* Handle style==='comment' in MetaBlockNode toDOM converter
* Add some comments to the meta test case
** Update other tests accordingly
* Change getDomElementSummary() to actually assert presence of comment
nodes (specifically, all non-text child nodes)
Change-Id: Ieef9418f4c47df3541477d9420aa2ab8df6e3df1
MWInternalLinkAnnotation was normalizing spaces to underscores. This is
bad. Instead, we now do the following:
* Normalize underscores to spaces for display purposes
* Store the original title without underscore/space mangling
* If the user didn't change the title (display title === original title
with s/_/ /g), use the original title. Otherwise use the user's title
verbatim, without normalizing either underscores or spaces.
Also, per a conversation with Gabriel, we now only restore hrefPrefix
when we're also restoring origTitle, otherwise Parsoid will barf.
Change-Id: Ia74a493b2bce96c9345b60ed692eeb2e43ebceff
AnnotationAction and SurfaceFragment now use insertAnnotations.
ve.dm.Surface.test
* Removed test for annotate method (not needed anymore)
ve.dm.SurfaceFragment
* Now using getInsertionAnnotations method
* Added support for modifying insertion annotations when annotating a zero-length selection
ve.dm.Surface
* Moved in insertion annotations state from document model
* Added insertion annotation interface (enable, disable, areEnabled, get, set, add, and remove)
* Simplified handling of annotations on change
* Removed annotate method (not used anymore)
ve.dm.Document
* Removed insertion annotations (moved it to surface model)
ve.ce.Surface
* Cleaned up handleInsertion and changed it to use the insertion annotations interface on the surface model
ve.AnnotationAction
* Moved insertion annotation handling out of here since it's now included in the surface fragment
Change-Id: I047d656acf7fa1c63f726ca2b0801e1476f84f96
ve.AnnotationAction
* Added filter to the clearAll method to allow clearing all matching annotations only
ve.dm.Document
* Some variable renaming for consistency
ve.dm.SurfaceFragment
* Added truncateRange method
* Added annotation scope to expandRange method
* Added support for passing an annotation object into annotateContent method
* Switched to using name instead of type in annotateContent method to match the ve.dm.Annotation class
* Fixed logic in annotation mode of expandSelection so that expansion only takes place if the annotation is found
ve.ui.LinkInspector
* Moved most of the functionality elsewhere
* General reorganization
* Changed setOverlayPosition to accept 2 arguments instead of an object with 2 properties and renamed it to positionOverlayBelow
* Check for annotation object before extracting target information from it
* Initialize default target as empty string to avoid undefined being cast to a string and the default target becoming 'undefined'
icons.ai, inspector.png, inspector.svg
* Added generic inspector icon which will be used when a custom icon is not specified in future inspector subclasses
ve.ui.Inspector.Icons
* Added inspector icon
* Renamed clear icon to remove to match it's actual image
ve.ui.Context
* Greatly simplified the interface, reducing the number of methods by inlining a few things and combining others
* Now always listening to resize events on the window rather than only while document is focused
* Not listening to scroll events anymore, they used to affect the top/bottom positioning of the menu which we don't do anymore
* Lots of cleanup and reorganization
* No need to fallback to empty array since getInspectorsForAnnotations does so already
* Only consider fully-covered annotations for inspectors
ve.ui.Frame
* Simplified the constructor by introducing the createFrame method
* General cleanup
* Typo fixes
ve.ui.Inspector
* Generalized lots of functionality previously located in the link inspector class which will be useful to all inspectors (such as title, clear button, saving changes, etc.)
* Added setDisabled and isDisabled methods to manage CSS changes and avoid needing to check the CSS to determine the state of the inspector (storing state in the view is evil)
* Added getMatchingAnnotations method for convenience
* Added prepareSelection stub
* Lots of cleanup and documentation
* Type pattern is now defined in base class
* Added stubs for onOpen and onClose with documentation so that subclass authors know what these methods do
* Removed checks for onOpen or onClose methods since they are now noop stubs and are always there
* Added stub and removed checks for onRemove
* Made esc key close and accept - the illusion is supposed to be that the link changes are applied instantly, even though they are only updated when you close, so all closing except for when removing should apply changes - i.e. esc is now equal to back rather than being a special function that doesn't have an associated affordance
* Only consider fully-covered annotations when getting matching annotations
ve.ui.InspectorFactory
* Depending on type pattern now since it's always there
* Added getInspectorsForAnnotations method
* Return empty array if annotation set is empty
VisualEditor, VisualEditor.i18n
* Added default inspector message
Change-Id: I1cc008445bcbc8cba6754ca4b6ac0397575980d5
TransactionProcessor was using parentOuterRange without checking whether
it was present, so it was exploding for indexInNode results.
Now checking for parentOuterRange presence, and falling back to
nodeOuterRange when missing.
This fix causes inconsistencies with zero-length text nodes. We should
fix these eventually, but for now I've just made the unit tests
tolerant of zero-length-text-node deviations.
Change-Id: Id9eadd57a0d5fcbaf009c0781da0a03928aebb31
Editing the text of a list item results in a change marker on the
paragraph within that list item. However, that paragraph usually isn't
present in the HTML, so the converter unwraps it when converting back to
HTML, and the change markers are lost. Instead, transfer the change
markers to the <li>.
Change-Id: Id675075d19c08d69bc8e990174841dc393b749fc
About groups are HTML structures like the following:
<div about="#mwt1">....</div>
<span about="#mwt1">...</span>
<div about="#mwt1">...</div>
When about groups are alienated, they are now merged into one alien
node, rather than producing a separate alien node for each sibling.
This is very basic about group handling, because it only works for
groups of directly adjacent siblings (text nodes are permitted in
between, but nothing else) assumes all about groups are aliens (which
is currently true).
* Before processing an element in the DOM->data converter, perform about
grouping on its children. This temporarily wraps about groups in
<div data-ve-aboutgroup="value of about attribute">
* Extended createAlien() to handle single nodes as well as wrappers
holding multiple nodes.
* In the data->DOM converter, temporarily wrap multi-node aliens in
<div data-ve-multi-child-alien-wrapper="true"> . This makes the rest
of the algorithm easier.
Change-Id: I2df5f62bc222b570fc11a89fe43d353f8363ead8
This causes the converter not to strip inner whitespace in them, and
causes CE to suppress the whitespace mangling logic that is normally
applied (↵ for newlines, ➞ for tabs, alternating s for spaces).
Change-Id: I738a750c91a4ca4836c485e282865bb7525bf30a
* Add map of change markers per offset to Transaction
* Map is populated by TransactionProcessor
* Markers are reversed on rollback
* Removals aren't marked, Parsoid can detect these using DSR
discontinuities
Change-Id: I2290886ab411c6ad6162044ed85c091313613e51
* ve.dm.Converter still generates metaInline/metaBlock elements as
before, it's not affected by this change
* ve.dm.Document constructor splits its input into "real" data and
metadata
** Metadata is stored in this.metadata (the meta-linmod) as a sparse
array of arrays, with an element for each offset in this.data
** this.data itself does not contain the metadata
** This means the node tree also doesn't contain the metadata
** Which means CE doesn't know about it at all
* All splice operations on the linear model are sent through
ve.dm.Document.spliceData(), which performs the splice and syncs the
meta-linmod
** Metadata in the removed range is reaped and added to the metadata for
the offset immediately following the removal
* ve.dm.Document.getFullData() splices the linmod and meta-linmod back
into each other; this "full data" is then fed back to ve.dm.Converter
Change-Id: Ief6dfd5b59cc13a8457993ed85c725413029c4fb
* Allow inspector to open with 0 length selection.
* Allow context menu to open with 0 length selection.
* Fixed bug in doc.getAnnotationsFromRange on zero length selection:
Method now returns annotations from start vs empty annotation set.
Change-Id: I3937c5c2824c7396d0c3ee11c13ffecdbed6052a
Moved implementation of all the tools into a reusable action
system. To execute an action just call
surface.execute( actionName, method, param1, param2, ... );
This helps keep tools simple, and opens the door to key commands
reusing the same code.
Change-Id: Ie786fa3d38d1ea17d39b5dfb8eeeb5f2256267ce
Will be used by the history tools in a future commit, providing
a reasonable interface to this information rather than the tool
reaching into private members.
Change-Id: I0472349968e9b48ec17eb47b6845ec9ccf3811e2
* Adjust the range in the annotation synchronizer, otherwise we emit
events for the wrong node
* Expanded test suite to the point where it was able to catch the bug
caused by not adjusting annotated ranges
* Removed selection.length === 0 check, no longer needed because
selectNodes() now throws an exception in this case
* Added a FIXME comment about duplicate update events that occur when
length adjustments are combined with something else
* Add a few more comments
Change-Id: I84f0368b1d7b601ed0766806607152dc97f34603
* Lift node assignment out of the if/else
* Flip the condition so we detect text-only replacements rather than
non-text-only replacements
* Additionally assert that there is exactly one selected node, and that
it is a text node
Change-Id: Iaaddf532f06709e860ac44457470e6d8bfcb6dd9
* Store the applied state in the Transaction
* Store the Transaction in the TransactionProcessor (previously, only
its operations were stored)
* Have commit() and rollback() throw exceptions when passed transactions
with the wrong applied state
* Add tests for this behavior
Change-Id: I27b7a96fdf4d3555d78f64c05a03702ea560c802
The data array is now taken by reference, and the caller must perform
any copying required.
Changed tests to make a deep copy of shared data sets (mostly
ve.dm.example) before passing them to ve.dm.Document().
Change-Id: Iedc64f9fd9cd689640de9a19379cf5f3db94a2bb
There's no use case for keeping a deep copy of the 'internal' property
in the node tree, and it was breaking some of my new tests concerning
change markers. We could keep internal data in the node tree if we
wanted to, but to be correct we'd have to synchronize every time we
changed it, which is a pain.
Change-Id: I024de1ff8b6b6154da82c103c4bb21db8ff2ec14
This was only causing data bloat and also errors because htmlTagName and htmlAttributes are only set if the annotation was constructed from an HTML element
Change-Id: I3d36bca6cd0194e1a4456bb51156117f70b96b13
The HTML "1<br/>2" was being converted to a linmod that looked like
"<p>1</p><br></br><p>2</p>". This commit fixes the wrapping logic such
that the result is "<p>1<br></br>2</p>" instead. In general, inline
nodes (content nodes) should not interrupt the wrapping, but block nodes
should.
This creates a problem for alien nodes: normally, we determine whether an
alien node is a block alien or an inline alien based on context, but if
we're in wrapping mode we're unsure of the context. We can't tell the
difference between "1<tt>Foo</tt>2" (should be wrapped as one, because
tt is inline) and "1<figure></figure>2" (1 and 2 should be wrapped
separately, because figure is block) using context alone, so in these
cases (and ONLY in these cases) we look up whether the HTML tag in
question is an inline tag or a block tag and use that to decide.
Change-Id: I75e7f3da387dd401d9b93e09a21751951eccbb83
* Added comments to classes and methods
* Quieted a jshint warning
* Broke some long lines
* Replaced instances of "var\t" with "var "
Change-Id: I1d617ed9e5180f1a3dff42078fb5debb5d718407
Exception was caused by passing -1 to getAnnotationsFromOffset(). So
check for -1 before passing it in; getNearestContentOffset() can
legitimately return -1 if there are no content offsets in the document,
which occurs when the document is empty.
I was originally going to change getNearestContentOffset(start - 1, -1)
to getRelativeContentOffset(start, -1), but Inez correctly pointed out
that that would have unwanted results when near an inline node.
Change-Id: Ife4b497b1c5fd04d411bb25cea99e6ea2abf146f
This was reproducible by blanking the entire document (Ctrl+A Delete),
then undoing that (Ctrl+Z). AFAIK that's the only way to trigger an
insertion on a document that is completely empty.
Change-Id: I22252d5972a413dff614880a90c4c6b22e79672d
The annotation-related code in the converter is greatly simplified
because the API itself takes care of almost everything already.
Change-Id: Ib48f52bad6b650a05dc4e7ef82db4158c19b3cf5
