Removing `0.8em` VE special base `font-size` for UI as we're unifying
OOUI interfaces to `14px` equals to `0.875em` at user agent default size.
Bug: T97631
Depends-on: I693d168d2ccf2babbcfe8952af3e1c262aa97773
Change-Id: I84edeec38ecfb90f5d53199f3b26fc3f83ab0611
It's possible for some load failure states to cause this teardown at a point
without a surface. I observed it in MobileFrontend, when restbase can't be
contacted.
Change-Id: I13489640759c73dad5730d0bbadbfb2a38cb8e53
This lets copy-paste between documents retain the numbered status rather than
falling back on pasting "<a>[3]</a>".
Update the part of LinkCache which selects on mw:ExtLink, so it will handle
possible multiple values in the link rel.
Bug: T188429
Change-Id: Ia5e4c9fa45e94da9cbfcd2a42d017d0fda1c511f
Always store immediately if fromEditedState is true. Also
now that we only store if there is state to recover, remove
the check for transactions before deciding to show the notification.
Change-Id: I5357a9098b91e303f5c71881ea03a080d2969fff
Specifically, set arabic(extended) and hebrew to 'rtl'.
Logically depends on I14abd3e0c0d23f79aa01d96c216eea913024b4c8
to set the dir attribute in UI.
Bug: T56310
Change-Id: I1c7e28d3d2f20ca84115be6d49650cd9a81d78dd
1. It wastes valuable time during setup.
2. If a user reloads the page without making changes we
should give them the latest html from the server to
minimise the chance of an edit conflict.
Change-Id: I9a1f8cfd65ef2552fe2c3d6d2bbf975851b52003
Ensure we start with the same HTML (i.e. if an edit has
been made since the crash-recovery):
* Whenever an article target is activated, stash the initial
document html, other parsoid response data, and the request
parameters (pageName, mode, section) in session storage.
* Whenever an article is fetched through the target loader,
recover from session storage if the request parameters match.
Store transactions:
* On document transaction (debounced) append the latest
changes to session storage.
* If a document state is recovered from session storage,
attempt to re-apply the stored transactions.
Clear transactions:
* Whenever the target is torn down (i.e. save, deliberately
closing the editor to go back to read mode)
Other:
* If writing to session storage fails once, disable future
attempts for that session (assume storage quota exceeded)
* Disable tempWikitextEditor when recovering. We don't have
the transaction code loaded yet to perform the recovery.
Bug: T57370
Depends-On: I3832243fc347a99641fcb7e39a887a153c9a3b22
Depends-On: I448fb566fe9f7f5b5a76e88b70ca000e3d35b415
Change-Id: Id9d877f903cf4796a52f90991c030417a9f8786f
Allows users to know when the widget has been constructed,
and access it (e.g. to set an initial selection)
Bug: T185279
Change-Id: I3678996bcf644cc889dd168ac3ce48b5c3633ec1
This line isn't solely for supporting FF52, that is the order
in which it is called (move after attach, not before),
but that matches all our other widgets, so not sure
it needs commenting.
Change-Id: I6f3cc5687f1e4b995dff700d0765d14de1927d51
mw.storage catches errors, so we won't crash horribly when the user has
localStorage disabled / full.
Bug: T181822
Change-Id: I212994eb535b9a8fb5f6c09deaa10b16c3d7f10e
Accesskeys in this situation are unreliable cross-browser. Firefox won't
trigger the accesskey inside the dialog. We can manually simulate it, via the
existing trigger.
Bug: T121183
Change-Id: Ib919d8b9fcd9324a517037bcc6ef93a26d1488b9
We emit <span id="..." typeof="mw:FallbackId"></span> inside headings
when necessary to provide backward compatibility with pre-HTML5
section ids. These are mostly harmless inside VE --- they become hidden
alienated nodes, which are then safely ignored by Parsoid during html2wt
even if they manage to migrate outside of a heading --- but it's a
little safer to strip them.
Change-Id: I07d0fcf54427ab02d4930cff183d3e5579a99306
Tell browsers we explicitly want spellchecking on the section title. If
unspecified this is browser-dependent, so it was inconsistent.
This won't actually have an effect until the next OOjs-UI release (v0.24.3),
as this was a new feature added to TextInputWidget.
Bug: T179654
Depends-On: Ifdd44ead7d782288aaef0979322f0943f7304835
Change-Id: I588874efcff91c5be03da2fc03c268f883b718e2
We need this hack when visually editing articles, but not in e.g. the
Flow integration. Move it down so that mw.Target has a clean
parseDocument method that can be used by Flow without undesirable
newlines being introduced.
Change-Id: I52bba88b3d33c3d6d16c4cf832f23f970a243abf
Idea being: preload use case is often "load content, maybe with parameters,
immediately save it", so we can treat it as being already-modified for saving
purposes.
Bug: T179063
Change-Id: I35ff04bc9cb5172edf8174832624145973aa1fdb
We were reimplementing (incompletely) the setup from the .init version. Just
call the original, modified slightly so it doesn't over-setup on repeated
calls.
Bug: T151021
Change-Id: I65bd7c5ecf75c478d6babeb13e7fb2a76a9842c8
The whitelist isn't checked for blacklisted browsers,
so if all non-blacklisted browsers are whitelisted,
set the whitelist definition to all (null).
Change-Id: I8ee3569d9d5be2eda9153f1b087c1be385f93d9c
ve.init.Target sets up TriggerListeners based on getSurfaceConfig if there's
no Surface instantiated. As such, loading directly in source mode would have
those listeners present and assuming the document is in visual mode. So, if
there's not a Surface already, we'll assume we're going to get one created
with the defaultMode, and set things up expecting that.
Bug: T153959
Change-Id: Ia0afe32e6b63ea0d3418137ca5c8bc32c009ecfa
* Rename 'deactivate' to 'tryDeactivate' as it may prompts
the user to deactivate.
* Merge 'cancel' and 'teardownSurface' in to 'teardown',
extending the parent method.
* Rename elementsThatHadOurAccessKey to $saveAccessKeyElements
and move teardown to parent class where it is setup.
* Move toolbarSaveButton teardown to parent class where it is setup.
* Cleanup changeDocumentTitle
Depends-On: I9d97614695272dca6936ef6f3461178fcf0368a8
Change-Id: Ie998a04c21f6615b4415edf471310db5edca3b5a
This code is meant to fix up the tabs if wgVisualEditorTabPosition
was changed and we're seeing cached HTML with the tabs in wrong order.
But it seems it has never worked. `$caEdit[ 0 ].nextSibling` is a text
node and obviously not equal to `$caVeEdit[ 0 ]`, and vice versa for
the other case. The logic is actually correct, so let's fix it to skip
over text nodes.
Also, remove a stray 'eslint-enable' comment left over in
a0f934ed26.
Bug: T50017
Change-Id: I23663a9bfcfdbf52918452c878a128e6960b1191
Vector no longer does the silly thing where the tabs are reversed in
the HTML in RTL languages, so we must remove our hack to do the same,
since otherwise it reintroduces the issue it was intended to prevent.
This essentially reverts 2efd4f0061.
Bug: T50017
Change-Id: Ibeaa55bc34899bffab849ea8ad8b127fb5184d43
The default value of target#pageName is wgRelevantPageName
but other targets my override this, or change it dynamically
(e.g. ContentTranslation).
Also remove duplicate setter of pageName in mw.ArticleTarget,
already set in mw.Target.
Change-Id: Iebd1def1d4142978a673afec584a0b663644d176
* Tiny fix to 33dc60838c for PHP variable name
* Bigger fix to properly pass preloadparams in and split them up
Change-Id: I844db115f2563cb9ee1629c30d5f49d1ce58f5bd
This allows the use of the preload and preloadparams query parameters. They
should behave as they do in the old editor, loading substituted content in
visual and source modes.
Bug: T51622
Change-Id: I522fb5b480d17912f6d6116be6aa043ead855b52
Other page state is read directly, rather than passed in.
If we come up with a use case for passing this in at a later
date we can reconsider the best way to do this.
Change-Id: Iee7e608c969776b89dbb38b3b56a5177e48344af
Instead, use getCheckboxesDefinition(), and build our save form
checkboxes from that rather than extracting them from the HTML.
The ability to have non-checkbox fields there is removed, as that was
never intentional and is now impossible.
To avoid transient problems during deployment (old JS code cached in
the user's browser receiving the new format of API responses), the old
property is kept in the API response. We should remove it next week.
Bug: T174613
Bug: T174686
Change-Id: I5bfca5e116fe790302c3b6ac1357e80237fb1ed2