Getting & setting the cursor is done with byte offsets
instead of data model offset (characters) so we need to
be able to convert between the two as well as splitting
characters.
TODO: The regex only works on surrogate pairs, not
yet combining accents.
fixupInsertion will combine a combining mark with the
character to its left it it can.
Bug: 48630
Change-Id: I8d936fb15d82f73cd45fac142c540a7950850d55
Prologue:
Farewell ve.Editor my good chap… Oh, hey there HTML frames - I didn't
see you there! In a world where iframes are outlaws, and symbols like
document and window are global, there were more than a few assumptions
about which document or window was being used. But fear not - for this
commit (probably) tracks them all down, leaving a trail of
iframe-compatible awesomeness in its wake. With the great ve.ui.Surface
now able to be used inside of iframes, let the reference editing
commence. But there, lurking in the darkness is a DM issue so fierce it
may take Roan and/or Ed up to 3 whole hours to sort it out.
Note to Roan and/or Ed:
Editing references seems to work fine, but when saving the page there
are "no changes" which is a reasonable indication to the contrary.
Objectives:
* Make it possible to have multiple surfaces be instantiated, get along
nicely, and be embedded inside of iframes if needed.
* Make reference content editable within a dialog
Approach:
* Move what's left of ve.Editor to ve.ui.Surface and essentially
obliterate all use of it
* Make even more stuff inherit from ve.Element (long live this.$$)
* Use the correct document or window anywhere it was being assumed to be
the top level one
* Resolve stacking order issues by removing the excessive use of z-index
and introducing global and local overlay elements for each editor
* Add a surface to the reference dialog, load up the reference contents
and save them back on apply
* Actually destroy what we create in ce and ui surfaces
* Add recursive frame offset calculation method to ve.Element
* Moved ve.ce.Surface's getSelectionRect method to the prototype
Bonus:
* Move ve.ce.DocumentNode.css contents to ve.ce.Node.css (not sure why it
was separate in the first place, but I'm likely the one to blame)
* Fix blatant lies in documentation
* Whitespace cleanup here and there
* Get rid of ve.ui.Window overlays - not used or needed
Change-Id: Iede83e7d24f7cb249b6ba3dc45d770445b862e08
Now comparing annotations in surface to insertionAnnotations
by comparable object to trigger pawn trick. Adding annotations
correctly to placeholder.
dm.Surface change method now uses setInsertionAnnotations()
and passes the AnnotationSet from offset-1. The set is cloned.
Added ve.ce.Surface.areAnnotationsCorrect() to compare either
annotations to the left or right to the insertionAnnotations.
Also use compareTo() and getComparableAnnotations() rather than
comparing by name, and fix SurfaceFragment.annotateContent() to
actually be selective when clearing rather than clearing everything.
Change-Id: I6116afa2e176daa0a0f2103a551501426829e2a6
Remove all manual changes to SF ranges as these are not
undoable. Instead change translate range to default to
outer expand and build functionality around that behaviour
never changing.
As translate range is always outer I don't think we need to
check for start and end crossing over?
Added more undo tests to assert these selections are maintained
properly, and added the test case to 'update' for when and undo
point is overwritten.
Insert content now results in a selection over the inserted
content. Most usages were expecting this anyway and were
followed up with an adjustRange(-length,0) which is no longer
necessary.
Noticed that the link inspector case was never being triggered
as word boundary was always expanding to at least one char (mainly
for Hanzi selection). This doesn't make much sense as single
spaces get auto selected so removed this functionality.
Split collapseRange out into collapseRangeToStart and
collapseRangeToEnd as this may be required to get the old
behaviour (range moves to end after insert).
Change-Id: I3dc0b4d00d37bad1ca3076a69b41c5f0b3fa0570
Clearing by type in SurfaceFragment didn't actually work. Instead,
it followed a code path intended for setting and created an annotation
of that type with no data, then tried to clear that. What we really
want to do there is clear anything with that type.
This fixes the bug where unbolding of text that was already bold in
the article didn't work.
Bug: 47680
Change-Id: I77f00e63c8732420063b0453fede7f453083c913
By removing the transaction listeners from surface fragments we
no longer have to make sure they are always manually destroyed.
In order to retain the functionality of having fragments update
with transactions elsewhere we keep a pointer to a place in the
new complete history stack in the surface. The complete history
stack records all transactions, even undone ones.
Whenever getRange is called we replay all transactions in the
complete history (in the correct order) since the fragment was
last updated.
Also in this commit:
* Updated Format/IndentationAction to test undo(). This increases
coverage of surface fragment behaviour.
* .range is always accessed by .getRange now, although as an
optimisation we can use the noCopy mode when we a sure the
returned range will not be modified.
* Added undo test to .update (previously .onTransact)
Bug: 47343
Change-Id: I9e9818da1baa8319a3002f6d74fd1aad6732a8f5
So. It turns out that the design of SurfaceFragment is a little -
shall we say - wonky.
One of the best things about ve.dm.SurfaceFragment is its magical
ability to retain the intention of its range, even as transactions
are being processed. This ability is granted by each fragment
listening to the surface's change event, and responding by using
translateRange for each transaction that gets processed. Surface
fragments also have these clever methods that allow you to get a
fragment based on another, which makes adjusting the range easy to do
inline without having to manually store multiple fragments or
modifying the original.
This sounded good, and we seemed to all be convinced it was well
designed. But if you add a console.log( 'hello' ); to the first line
of ve.dm.SurfaceFragment.prototype.onTransact, and then start using
the bold tool on various selections of text, you will find that there
may indeed be a flaw. What you will probably realize is that the
number of times that particular line of code is being called is
disturbingly large, and increases each time you do just about anything
in the editor. What's going on? How did we get here? Read on…
It turns out that fragments are immortal. We create them, they listen
to the surface's transact event, we are done with them, but the
surface keeps on emitting events to the now long forgotten about
fragments. They continue to build up over time, never go out of scope,
and bloat the hell out of our program.
The same ended up being true of toolbars - and each time the context
menu fired up a new one the old one was left in limbo, still
responding to events, still taking up memory, but not being visible to
the user.
All of this immortality was causing strange and difficult to track
down problems. This patch fixes this by introducing a destroy method.
This method unbinds events, allowing the object to finally fall out of
scope and die - and more importantly stop receiving notifications of
changes.
This is a hack, but Ed will no doubt get this situation sorted out
properly by making fragments lazy-evaluate their selections by only
storing an identifier of the most recent transaction they were based
on, see bug 47343.
Change-Id: I18bb986001a44732a7871b9d79dc3015eedfb168
Change 57076 implemented the functionality required to skip
words in UnicodeJS. This change simply removes all the existing
code we had and replaces it with this implementation.
Bug: 46794
Change-Id: I6b2700d65476c4d34ba4a01a88382d7af8e736fb
Created an IndexValueStore class which can store any object and return
an integer index to its hash map.
Linear data is now stored in ve.dm.LinearData instances. Two subclasses
for element and meta data contain methods specific to those data types
(ElementLinearData and MetaLinearData).
The static methods in ve.dm.Document that inspected data at a given
offset are now instance methods of ve.dm.ElementLinearData.
AnnotationSets (which are no longer OrderedHashSets) have been moved
to /dm and also have to be instantiated with a pointer the store.
Bug: 46320
Change-Id: I249a5d48726093d1cb3e36351893f4bff85f52e2
Initially just with a Wordbreak module to implement Unicode standard
on 'Default Word Boundaries'. Due to it's standaloneability this has
been written as a separate library. Non-BMP characters are currently
not supported.
Bug: 44085
Change-Id: Ieafa070076f4c36855684f6bc179667e28af2c25
* Document them consistently between secetions Inheritance and
Static Properties under their own (new) section Events.
* Removed any quotes or brackets around the event name in existing
@emit annotations
Search: @emit.*['"{}(){}]
* For every call to this.emit() anywhere, added @emits.
* Fixed all warnings for references to undefined events
(introduced as a result of the previous point).
Event handler parameter documented based on the emit() call
and actual handlers using the event. Usually the latter is
more elaborate.
* Extend coverage of jQuery as needed
(copied from mwcore/maintenance/jsduck/external.js
written by me, hereby implicitly and explicitly released under MIT).
Specifics
* ve.ce.Surface#onContentChange: Fixed type of range from Object to ve.Range.
* ve.ce.SurfaceObserver#poll: Fix syntax for code from {} to `backticks`.
* ve.ui.Toolbar#onContextChange: Doesn't actually emit "clearState" event.
Removed #onClearState in Tool, ButtonTool and DropdownTool.
Bug: 45872
Change-Id: Id879aa769b2c72d86a0322e75dddeb868211ce28
isolateAndUnwrap now unwraps to a level determined by a target type
i.e. the type you are going to convert to.
Also in this commit wrap/unwrap/rewrap have been refactored to use
getLengthDifference. unwrap now takes an inner/outer unwrap depth.
Change-Id: I3c6249de43232a9ef64f498a0aaf66b1c44973f2
rewrapAllNodes is effectively the same as unwrap then wrap
except it operates as one transaction as so avoids a potentially
invalid intermediate state.
Added some more comments for unwrapAllNodes and renamed a varaible
for consistency.
Fixed a typo in Transaction.newFromWrap comment.
Bug: 45242
Change-Id: Ie752a788d087055d97c7c6f75f59c6a2680d26c7
wrapAllNodes was calulating the new selection incorrectly. This has
been fixed and a test added.
unwrapAllNodes takes a depth as its argument and unwraps that many
elements from inside the selection.
Tests for wrap/unwrap apply also now check that applying a wrap
and then its inverse as an unwrap result in the document reverting
to its original state.
Change-Id: I7dcacdfb5894be59ffad69b369d7b32933a25b61
This method will take a selection of siblings and ensure they
are the only chlidren in their first parent which can be placed anywhere
(for example the first parent of a tableCell which can be placed anywhere
is a table, and for a listItem is a list).
The method ensures no redundant empty tags are created, so if
the selection encompasses all siblings then no action is taken.
Also in this commit are two test cases run against ve.dm.example.isolationData.
Change-Id: I783bd5ecd9d43d61f9b2685985409b4d746cbe94
This resolves a TODO
* Added logic to support passing an argument into annotation constructor which is used as the data property (reusing the element argument)
* Updated documentation
* Simplified instantiation of annotations
Change-Id: I142b8fa3883bf70c896a2a568088d833814ef2dc
* Made method descriptions imperative: "Do this" rather than "Does this"
* Changed use of "this object" to "the object" in method documentation
* Added missing documentation
* Fixed incorrect documentation
* Fixed incorrect debug method names (as in those VeDmClassName tags we add to functions so they make sense when dumped into in the console)
* Normalized use of package names throughout
* Normalized class descriptions
* Removed incorrect @abstract tags
* Added missing @method tags
* Lots of other minor cleanup
Change-Id: I4ea66a2dd107613e2ea3a5f56ff54d675d72957e
Follow up for I6a7c9e8ee8f995731bc205d666167874eb2ebe23
The first pass that Timo took missed the following cases
* "{Array|String}": string is just one of the values
* "{String[]}": string is followed by [] to indicate an array of strings
Change-Id: I65e595e8d37fb624802d84af9536a2d3c5d73c7d
See CODING.md for how to run it.
Mistakes fixed:
* Warning: Unknown type function
-> Function
* Warning: Unknown type DOMElement
-> HTMLElement
* Warning: Unknown type DOM Node
-> HTMLElement
* Warning: Unknown type Integer
-> Mixed
* Warning: Unknown type Command
-> ve.Command
* Warning: Unknown type any
-> number
* Warning: Unknown type ve.Transaction
-> ve.dm.Transaction
* Warning: Unknown type ve.dm.AnnotationSet
-> ve.AnnotationSet
* Warning: Unknown type false
-> boolean
* Warning: Unknown type ve.dm.AlienNode
ve.dm doesn't have a generic AlienNode like ve.ce
-> Unknown type ve.dm.AlienInlineNode|ve.dm.AlienBlockNode
* Warning: Unknown type ve.ve.Surface
-> ve.ce.Surface
* ve.example.lookupNode:
-> Last @param should be @return
* ve.dm.Transaction.prototype.pushReplace:
-> @param {Array] should be @param {Array}
* Warning: ve.BranchNode.js:27: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
* Warning: ve.LeafNode.js:21: {@link ve.Node#hasChildren} links to non-existing member
-> (removed)
Differences fixed:
* Variadic arguments are like @param {Type...} [name]
instead of @param {Type} [name...]
* Convert all file headers from /** to /*! because JSDuck tries
to parse all /** blocks and fails to parse with all sorts of
errors for "Global property", "Unnamed property", and
"Duplicate property".
Find: \/\*\*([^@]+)(@copyright)
Replace: /*!$1$2
* Indented blocks are considered code examples.
A few methods had documentation with numbered lists that were
indented, which have now been updated to not be intended.
* The free-form text descriptions are parsed with Markdown,
which requires lists to be separated from paragraphs by an
empty line.
And we should use `backticks` instead of {braces} for inline
code in text paragraphs.
* Doc blocks for classes and their constructor have to be
in the correct order (@constructor, @param, @return must be
before @class, @abstract, @extends etc.)
* `@extends Class` must not have Class {wrapped}
* @throws must start with a {Type}
* @example means something else. It is used for an inline demo
iframe, not code block. For that simply indent with spaces.
* @member means something else.
Non-function properties are marked with @property, not @member.
* To create a link to a class or member, in most cases the name
is enough to create a link. E.g. Foo, Foo.bar, Foo.bar#quux,
where a hash stands for "instance member", so Foo.bar#quux,
links to Foo.bar.prototype.quux (the is not supported, as
"prototype" is considered an implementation detail, it only
indexes class name and method name).
If the magic linker doesn't work for some case, the
verbose syntax is {@link #target label}.
* @property can't have sub-properties (nested @param and @return
values are supported, only @static @property can't be nested).
We only have one case of this, which can be worked around by
moving those in a new virtual class. The code is unaltered
(only moved down so that it isn't with the scope of the main
@class block). ve.dm.TransactionProcessor.processors.
New:
* @mixins: Classes mixed into the current class.
* @event: Events that can be emitted by a class. These are also
inherited by subclasses. (+ @param, @return and @preventable).
So ve.Node#event-attach is inherited to ve.dm.BreakNode,
just like @method is.
* @singleton: Plain objects such as ve, ve.dm, ve.ce were missing
documentation causing a tree error. Documented those as a
JSDuck singleton, which they but just weren't documented yet.
NB: Members of @singleton don't need @static (if present,
triggers a compiler warning).
* @chainable: Shorthand for "@return this". We were using
"@return {classname}" which is ambiguous (returns the same
instance or another instance?), @chainable is specifically
for "@return this". Creates proper labels in the generated
HTML pages.
Removed:
* @mixin: (not to be confused with @mixins). Not supported by
JSDuck. Every class is standalone anyway. Where needed marked
them @class + @abstract instead.
Change-Id: I6a7c9e8ee8f995731bc205d666167874eb2ebe23
ve.Range
* Rewrote truncate so that it works as expected, truncation should always reduce the length using the start/end values, not the from/to values
ve.ui.Inspector
* Added a comment about where the name argument to onBeforeInspectorOpen comes from, since it's a little bit confusing on first read (and I wrote it!)
* Calling onInitialize, onOpen and onClose methods directly, since we need to control the before or after-ness of listeners getting in there and doing their stuff - plus it's more direct
* Removed onRemove stub, which is never actually called
* Added before/after versions of initialize, open and close events
* Got rid of recursion guard since we don't need it anymore thanks to changes made in ve.dm.Surface (see below)
ve.ui.Context
* Updated event names to deal with new before/after naming of initialize, open and close events
* Removed fade-in logic since fading in doesn't even work anymore - since now we now annotate first, then open the inspector, the menu will actually exist and be open when we open the inspector even though you don't see it because it's quickly obscured
ve.ui.LinkInspector
* Made fragments non-auto selecting, in the case of onInitialize we actually call select(), which is silly since we were using an auto-selecting fragment - it's clear that this was a mistake
ve.dm.Surface
* Moved locking (polling stop and start) to the far outside edges of the change method
* I need a lot of eyes and testing on this change, it seems OK to me, but I'm suspicious that it may have side effects
* What was happening is that selection changes were being applied and then the poll was picking them up, and then the selection was coming in again as a change, but it wasn't a change at all, it was just feedback - this change event was then closing the inspector the instant it was opened - the odd part was that this only occurred when you selected backwards, which seems to be caused by the range being normalized, so it looked like a new selection even though it wasn't
ve.dm.Document
* trimOuterSpace from Range didn't consider annotated spaces to be spaces, by using the [0] trick (first character of a plain text character string or first element in an annotated character's array both are the character's value - but elements don't have a property named '0' so it skips those safely as well) we can always get the right value for comparison
Change-Id: I0873d906c058203b83b8d4bbe5a4b274f05a26fd
ve.ce.Surface
* Added ve.ce.Surface.adjustCursor, which replaces repetitive and buggy code that was handling left and right arrow key presses
* New method only affects the selection target, so it won't collapse the selection on you - this was what caused bug 42401
* Made hasSlugAtOffset() actually return a boolean
ve.dm.Document
* Fixed turn-around issue in ve.dm.Document.getRelativeOffset - if the offset is already valid and we can't move in the direction we want, we should just leave it be, not turn around
* Since this method was being used by ve.ce.Surface to correct the cursor position on arrow key presses, it was causing the strange cursor jumping when you pressed an arrow key while at the edge of a document
ve.dm.SurfaceFragment
* Fixed typo where getAnnotationRangeFromSelection was preserving selection direction, but checking the wrong properties
ve.dm.Document.test
* Added tests that verify turn-around issue is fixed
Change-Id: Iba55cfc3d531e7d1333b78c94912ff22179aace8
ve.dm.SurfaceFragment
* Removed flawed implementation of word mode for expandRange method and made use of new getNearestWordBoundary method in the document model
ve.dm.Surface
* Got rid of useInsertionAnnotations, which allowed disabling and enabling of insertion annotations - this isn't needed anymore because it was just a dirty hack around the improper starting and stopping of surface observer that's now solved more elegantly by emitting lock and unlock before committing or rolling back transactions
* Get annotations from the first character of the selection if the selection is not collapsed
* Only emit annotationChange events if it really changed
ve.dm.Document
* Added getNearestWordBoundary method which performs the work behind the surface fragment expandRange word method
ve.ce.SurfaceObserver
* Allow using an initial selection to avoid the observer thinking the selection has changed just because it started out with null
* Only emit selectionChange event if there was a meaningful change
ve.ce.Surface
* (bug 42279) Only annotate characters if insertion annotations are not empty
* Remove manual locking and unlocking, this is now done inside the change method of surface model
* Provide an initial selection to surface observer when we clear it
* Remove enabling and disabling of insertionAnnotations, this isn't needed anymore
* Stop/start observer on key presses that execute actions as well as those that have no special handling
ve.ce.Document
* Make getNodeFromOffsetand getSlugAtOffset return null when given -1 as an offset
Change-Id: Ibf6b26de299e54ae8688a2653bf5d5538927f8c3
ve.ui.Inspector
* Removed disabled state and interfaces - this isn't needed
* Renamed prepareSelection to onInitialize
* Using event emitter to run onInitialize, onOpen and onClose methods
* Left removal up to the child class to handle in the onClose method
* Replaced calls on context to close inspector to calling close directly
* Renamed prepareSelection stub to onInitialize
* Emitting initialize event from within the open method
* Added recursion guarding to close method
* Changed the close method's argument to be remove instead of accept - the more common case is to save changes, and the only time you wouldn't save changes is if you were to remove the annotation
* Moved focus restore to close method
ve.ui.Context
* Moved the majority of the code in openInspector and closeInspector to event handlers for onInspectorOpen and onInspectorClose
* Updated calls to closeInspector re: accept->remove argument change
ve.ui.LinkInspector
* Renamed prepareSelection to onInitialize and rewrote logic and documentation
* Removed unused onLocationInputChange method
* Moved restore focus (now it's in the inspector base class)
ve.dm.SurfaceFragment
* Added word mode for expandRange
ve.dm.Surface
* Added locking/unlocking while processing transactions - this was not an issue before because this was effectively being done manually throughout ce (which needs to be cleaned up) but once we started using the content action to insert content dm and ce started playing off each other and inserting in a loop - we already do this for undo/redo so it makes sense to do it here as well
ve.InspectorAction
* Updated arguments re: close method's accept->remove argument change
Change-Id: I38995d4101fda71bfb2e6fe516603507ce820937
AnnotationAction and SurfaceFragment now use insertAnnotations.
ve.dm.Surface.test
* Removed test for annotate method (not needed anymore)
ve.dm.SurfaceFragment
* Now using getInsertionAnnotations method
* Added support for modifying insertion annotations when annotating a zero-length selection
ve.dm.Surface
* Moved in insertion annotations state from document model
* Added insertion annotation interface (enable, disable, areEnabled, get, set, add, and remove)
* Simplified handling of annotations on change
* Removed annotate method (not used anymore)
ve.dm.Document
* Removed insertion annotations (moved it to surface model)
ve.ce.Surface
* Cleaned up handleInsertion and changed it to use the insertion annotations interface on the surface model
ve.AnnotationAction
* Moved insertion annotation handling out of here since it's now included in the surface fragment
Change-Id: I047d656acf7fa1c63f726ca2b0801e1476f84f96
ve.AnnotationAction
* Added filter to the clearAll method to allow clearing all matching annotations only
ve.dm.Document
* Some variable renaming for consistency
ve.dm.SurfaceFragment
* Added truncateRange method
* Added annotation scope to expandRange method
* Added support for passing an annotation object into annotateContent method
* Switched to using name instead of type in annotateContent method to match the ve.dm.Annotation class
* Fixed logic in annotation mode of expandSelection so that expansion only takes place if the annotation is found
ve.ui.LinkInspector
* Moved most of the functionality elsewhere
* General reorganization
* Changed setOverlayPosition to accept 2 arguments instead of an object with 2 properties and renamed it to positionOverlayBelow
* Check for annotation object before extracting target information from it
* Initialize default target as empty string to avoid undefined being cast to a string and the default target becoming 'undefined'
icons.ai, inspector.png, inspector.svg
* Added generic inspector icon which will be used when a custom icon is not specified in future inspector subclasses
ve.ui.Inspector.Icons
* Added inspector icon
* Renamed clear icon to remove to match it's actual image
ve.ui.Context
* Greatly simplified the interface, reducing the number of methods by inlining a few things and combining others
* Now always listening to resize events on the window rather than only while document is focused
* Not listening to scroll events anymore, they used to affect the top/bottom positioning of the menu which we don't do anymore
* Lots of cleanup and reorganization
* No need to fallback to empty array since getInspectorsForAnnotations does so already
* Only consider fully-covered annotations for inspectors
ve.ui.Frame
* Simplified the constructor by introducing the createFrame method
* General cleanup
* Typo fixes
ve.ui.Inspector
* Generalized lots of functionality previously located in the link inspector class which will be useful to all inspectors (such as title, clear button, saving changes, etc.)
* Added setDisabled and isDisabled methods to manage CSS changes and avoid needing to check the CSS to determine the state of the inspector (storing state in the view is evil)
* Added getMatchingAnnotations method for convenience
* Added prepareSelection stub
* Lots of cleanup and documentation
* Type pattern is now defined in base class
* Added stubs for onOpen and onClose with documentation so that subclass authors know what these methods do
* Removed checks for onOpen or onClose methods since they are now noop stubs and are always there
* Added stub and removed checks for onRemove
* Made esc key close and accept - the illusion is supposed to be that the link changes are applied instantly, even though they are only updated when you close, so all closing except for when removing should apply changes - i.e. esc is now equal to back rather than being a special function that doesn't have an associated affordance
* Only consider fully-covered annotations when getting matching annotations
ve.ui.InspectorFactory
* Depending on type pattern now since it's always there
* Added getInspectorsForAnnotations method
* Return empty array if annotation set is empty
VisualEditor, VisualEditor.i18n
* Added default inspector message
Change-Id: I1cc008445bcbc8cba6754ca4b6ac0397575980d5
Moved implementation of all the tools into a reusable action
system. To execute an action just call
surface.execute( actionName, method, param1, param2, ... );
This helps keep tools simple, and opens the door to key commands
reusing the same code.
Change-Id: Ie786fa3d38d1ea17d39b5dfb8eeeb5f2256267ce
I think what happened here is I added the skeleton code, Kranitor came through and removed the unused arguments, then I merged in my implementations without pulling, then pushed - git merged cleanly, the arguments I thought were there were not there, and tests broke.
Change-Id: I5aa2968fef164c774a10db83a6df1753c93cd2dc
* Commands for Sublime:
Find*: "(\* @[a-z]+) ([^{].*) \{(.*)\}"
Replace: "$1 {$3} $2"
Save all && Close all
Find: " function("
Replace: " function ("
Save all && Close all
Find: "Intialization"
Replace: "Initialization"
Save all && Close all
* Consistent use of types (documented in CODING.rm):
- Merged {Integer} into {Number}.
- Merged {DOM Node} into {DOMElement}.
* Remove work-around /*jshint newcap: false */ from ve.js
Calling Object() as a function to to use the internal
toObject no longer throws a newcap warning in JSHint.
It only does that normal functions now .
(e.g. var a = Cap(); or var a = new uncap();)
* Add missing annotations (@static, @method, ..).
* Remove unused variables
* Remove null-assignments to variables that should just be
undefined. There's a few variables explicitly set to null
whereas they are set a few lines under and not used otherwise
(e.g. 'tx' in ve.ce.Surface.prototype.onPaste)
Change-Id: I0721a08f8ecd93c25595aedaa1aadb0e08b83799
* For the most common case:
- replace ve.extendClass with ve.inheritClass (chose slightly
different names to detect usage of the old/new one, and I
like 'inherit' better).
- move it up to below the constructor, see doc block for why.
* Cases where more than 2 arguments were passed to
ve.extendClass are handled differently depending on the case.
In case of a longer inheritance tree, the other arguments
could be omitted (like in "ve.ce.FooBar, ve.FooBar,
ve.Bar". ve.ce.FooBar only needs to inherit from ve.FooBar,
because ve.ce.FooBar inherits from ve.Bar).
In the case of where it previously had two mixins with
ve.extendClass(), either one becomes inheritClass and one
a mixin, both to mixinClass().
No visible changes should come from this commit as the
instances still all have the same visible properties in the
end. No more or less than before.
* Misc.:
- Be consistent in calling parent constructors in the
same order as the inheritance.
- Add missing @extends and @param documentation.
- Replace invalid {Integer} type hint with {Number}.
- Consistent doc comments order:
@class, @abstract, @constructor, @extends, @params.
- Fix indentation errors
A fairly common mistake was a superfluous space before the
identifier on the assignment line directly below the
documentation comment.
$ ack "^ [^*]" --js modules/ve
- Typo "Inhertiance" -> "Inheritance".
- Replacing the other confusing comment "Inheritance" (inside
the constructor) with "Parent constructor".
- Add missing @abstract for ve.ui.Tool.
- Corrected ve.FormatDropdownTool to ve.ui.FormatDropdownTool.js
- Add function names to all @constructor functions. Now that we
have inheritance it is important and useful to have these
functions not be anonymous.
Example of debug shot: http://cl.ly/image/1j3c160w3D45
Makes the difference between
< documentNode;
> ve_dm_DocumentNode
...
: ve_dm_BranchNode
...
: ve_dm_Node
...
: ve_dm_Node
...
: Object
...
without names (current situation):
< documentNode;
> Object
...
: Object
...
: Object
...
: Object
...
: Object
...
though before this commit, it really looks like this
(flattened since ve.extendClass really did a mixin):
< documentNode;
> Object
...
...
...
Pattern in Sublime (case-sensitive) to find nameless
constructor functions:
"^ve\..*\.([A-Z])([^\.]+) = function \("
Change-Id: Iab763954fb8cf375900d7a9a92dec1c755d5407e
Introduced the ve.AnnotationSet class to manage sets of annotations. This
is a generalization of ve.OrderedHashSet, a class that manages a set
using an array and an object keyed by hash.
Converted everything that stores, tracks or passes around annotations to
use ve.AnnotationSet. In particular, this means the linear model now
contains AnnotationSets instead of hash-keyed objects.
This allows us to maintain the order of annotations in the linear model,
and will help fix bugs with annotation ordering and splitting.
Change-Id: I50975b0a95f4cc33017a0b59fdede9ed1eff0124
[jshint]
ce/ve.ce.Surface.js: line 670, col 9, Too many var statements.
ce/ve.ce.Surface.js: line 695, col 6, Missing semicolon.
ce/ve.ce.Surface.js: line 726, col 22, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 726, col 41, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 733, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 734, col 24, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 1013, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 1019, col 17, Too many var statements.
ce/ve.ce.Surface.js: line 1023, col 18, Too many ar statements.
ce/ve.ce.Surface.js: line 1027, col 13, Too many var statements.
dm/annotations/ve.dm.LinkAnnotation.js: line 70, col 52, Insecure '.'.
dm/ve.dm.Converter.js: line 383, col 29, Empty block.
dm/ve.dm.Converter.js: line 423, col 33, Empty block.
Commands:
* jshint .
* ack '(if|else|function|switch|for|while)\('
* Sublime Text 2:
Find(*): (if|else|function|switch|for|while)\(
Replace: $1 (
* ack ' ' -Q # double spaces, except in certain comments
Change-Id: I8e34bf2924bc8688fdf8acef08bbc4f6707e93be
