Exception was caused by passing -1 to getAnnotationsFromOffset(). So
check for -1 before passing it in; getNearestContentOffset() can
legitimately return -1 if there are no content offsets in the document,
which occurs when the document is empty.
I was originally going to change getNearestContentOffset(start - 1, -1)
to getRelativeContentOffset(start, -1), but Inez correctly pointed out
that that would have unwanted results when near an inline node.
Change-Id: Ife4b497b1c5fd04d411bb25cea99e6ea2abf146f
Previously, Undo used a transaction's lengthDifference to calculate the selection to display after the transaction was undone. Now, translateOffset with the reversed boolean set to true will properly translate the inverse of a transaction's selection change. Fixes bug #40538
Change-Id: I110bc0cbb5824547842efd391b9f2948b037b758
This allowed me to move ve.ce.Surface particulars (such as the starting, stopping and clearing of polling) out of the UI code.
Also cleaned up some switch statements.
Change-Id: I7b85e42a4e01f8d76237d995e25275f2424541ea
Previously, we were looking one offset to the left to load the insertAnnotations. This would fail at the beginning of a document that began with a slug, and probably other cases too. Now using getRelativeContent offset.
Change-Id: I31b24e2ccfa9fda2ce7fb19d1221f8708a96083f
* Added documentation for ve.AnnotationSet
* Replaced uses of "// Inheritance" with "// parent Constructor"
* Added "// Mixin constructor" where needed
* Added missing section comments like "/* Static Methods */"
* Cleaned up excessive newlines (matching /\n\n\n/g)
* Put unnecessarily multi-line statements on a single line
Change-Id: I2c9b47ba296f7dd3c9cc2985581fbcefd6d76325
* For the most common case:
- replace ve.extendClass with ve.inheritClass (chose slightly
different names to detect usage of the old/new one, and I
like 'inherit' better).
- move it up to below the constructor, see doc block for why.
* Cases where more than 2 arguments were passed to
ve.extendClass are handled differently depending on the case.
In case of a longer inheritance tree, the other arguments
could be omitted (like in "ve.ce.FooBar, ve.FooBar,
ve.Bar". ve.ce.FooBar only needs to inherit from ve.FooBar,
because ve.ce.FooBar inherits from ve.Bar).
In the case of where it previously had two mixins with
ve.extendClass(), either one becomes inheritClass and one
a mixin, both to mixinClass().
No visible changes should come from this commit as the
instances still all have the same visible properties in the
end. No more or less than before.
* Misc.:
- Be consistent in calling parent constructors in the
same order as the inheritance.
- Add missing @extends and @param documentation.
- Replace invalid {Integer} type hint with {Number}.
- Consistent doc comments order:
@class, @abstract, @constructor, @extends, @params.
- Fix indentation errors
A fairly common mistake was a superfluous space before the
identifier on the assignment line directly below the
documentation comment.
$ ack "^ [^*]" --js modules/ve
- Typo "Inhertiance" -> "Inheritance".
- Replacing the other confusing comment "Inheritance" (inside
the constructor) with "Parent constructor".
- Add missing @abstract for ve.ui.Tool.
- Corrected ve.FormatDropdownTool to ve.ui.FormatDropdownTool.js
- Add function names to all @constructor functions. Now that we
have inheritance it is important and useful to have these
functions not be anonymous.
Example of debug shot: http://cl.ly/image/1j3c160w3D45
Makes the difference between
< documentNode;
> ve_dm_DocumentNode
...
: ve_dm_BranchNode
...
: ve_dm_Node
...
: ve_dm_Node
...
: Object
...
without names (current situation):
< documentNode;
> Object
...
: Object
...
: Object
...
: Object
...
: Object
...
though before this commit, it really looks like this
(flattened since ve.extendClass really did a mixin):
< documentNode;
> Object
...
...
...
Pattern in Sublime (case-sensitive) to find nameless
constructor functions:
"^ve\..*\.([A-Z])([^\.]+) = function \("
Change-Id: Iab763954fb8cf375900d7a9a92dec1c755d5407e
[jshint]
ce/ve.ce.Surface.js: line 670, col 9, Too many var statements.
ce/ve.ce.Surface.js: line 695, col 6, Missing semicolon.
ce/ve.ce.Surface.js: line 726, col 22, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 726, col 41, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 733, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 734, col 24, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 1013, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 1019, col 17, Too many var statements.
ce/ve.ce.Surface.js: line 1023, col 18, Too many ar statements.
ce/ve.ce.Surface.js: line 1027, col 13, Too many var statements.
dm/annotations/ve.dm.LinkAnnotation.js: line 70, col 52, Insecure '.'.
dm/ve.dm.Converter.js: line 383, col 29, Empty block.
dm/ve.dm.Converter.js: line 423, col 33, Empty block.
Commands:
* jshint .
* ack '(if|else|function|switch|for|while)\('
* Sublime Text 2:
Find(*): (if|else|function|switch|for|while)\(
Replace: $1 (
* ack ' ' -Q # double spaces, except in certain comments
Change-Id: I8e34bf2924bc8688fdf8acef08bbc4f6707e93be
Make ve.dm.Surface.change accept array of transactions as a parameter (instead of just one) and use it in complex content removal (handled in Surface view).
Change-Id: I453b3606cefe140db206f5a2d2c9036bcbd639c9
This makes a lot more sense when you start making a surface fragment from a new surface, because a null range would seem to have unpredictable behavior.
Change-Id: I85210878deca3067960fa4a14e2a760e55f67e4e
Refactor:
* ve.indexOf
Renamed from ve.inArray.
This was named after the jQuery method which in turn has a longer
story about why it is so unfortunately named. It doesn't return
a boolean, but an index. Hence the native method being called
indexOf as well.
* ve.bind
Renamed from ve.proxy.
I considered making it use Function.prototype.bind if available.
As it performs better than $.proxy (which doesn't use to the native
bind if available). However since bind needs to be bound itself in
order to use it detached, it turns out with the "call()" and
"bind()" it is slower than the $.proxy shim:
http://jsperf.com/function-bind-shim-perf
It would've been like this:
ve.bind = Function.prototype.bind ?
Function.prototype.call.bind( Function.prototype.bind ) :
$.proxy;
But instead sticking to ve.bind = $.proxy;
* ve.extendObject
Documented the parts of jQuery.extend that we use. This makes it
easier to replace in the future.
Documentation:
* Added function documentation blocks.
* Added annotations to functions that we will be able to remove
in the future in favour of the native methods.
With "@until + when/how".
In this case "ES5". Meaning, whenever we drop support for browsers
that don't support ES5. Although in the developer community ES5 is
still fairly fresh, browsers have been aware for it long enough
that thee moment we're able to drop it may be sooner than we think.
The only blocker so far is IE8. The rest of the browsers have had
it long enough that the traffic we need to support of non-IE
supports it.
Misc.:
* Removed 'node: true' from .jshintrc since Parsoid is no longer in
this repo and thus no more nodejs files.
- This unraveled two lint errors: Usage of 'module' and 'console'.
(both were considered 'safe globals' due to nodejs, but not in
browser code).
* Replaced usage (before renaming):
- $.inArray -> ve.inArray
- Function.prototype.bind -> ve.proxy
- Array.isArray -> ve.isArray
- [].indexOf -> ve.inArray
- $.fn.bind/live/delegate/unbind/die/delegate -> $.fn.on/off
Change-Id: Idcf1fa6a685b6ed3d7c99ffe17bd57a7bc586a2c
Also added some checks in content branch conversion to make sure that converting from and to the same thing results in a no-op
Change-Id: Ie47520d666e45a77d12c7ebb9457aef7ab6b8097
* Restricting "camelcase":
No changes, we were passing all of these already
* Explicitly unrestricting "forin" and "plusplus"
These are off by default in node-jshint, but some distro of jshint
and editors that use their own wrapper around jshint instead of
node-jshint (Eclipse?) may have different defaults. Therefor
setting them to false explicitly. This also serves as a reminder
for the future so we'll always know we don't pass that, in case
we would want to change that.
* Fix order ("quotemark" before "regexp")
* Restricting "unused"
We're not passing all of this, which is why I've set it to false
for now. But I did put it in .jshintrc as placeholder.
I've fixed most of them, there's some left where there is no clean
solution.
* While at it fix a few issues:
- Unused variables ($target, $window)
- Bad practices (using jQuery context for find instead of creation)
- Redundant /*global */ comments
- Parameters that are not used and don't have documentation either
- Lines longer than 100 chars @ 4 spaces/tab
* Note:
- ve.ce.Surface.prototype.onChange takes two arguments but never
uses the former. And even the second one can be null/undefined.
Aside from that, the .change() function emits
another event for the transaction already. Looks like this
should be refactored a bit, two more separated events probably
or one that is actually used better.
- Also cleaned up a lot of comments, some of which were missing,
others were incorrect
- Reworked the contentChange event so we are no longer using the
word new as an object key; expanded a complex object into multiple
arguments being passed through the event to make it easier to work
with and document
Change-Id: I8490815a508c6c379d5f9a743bb4aefd14576aa6
* Classicifation (JS)
Use addClass instead of attr( 'class' ) whenever possible.
addClass will manipulate the properties directly instead of
(re-)setting an attribute which (most) browsers then sync
with the properties.
Difference between:
elem.className
and
elem.setAttribute( 'class', .. );
Just like .checked, .value, .disabled and other interactive
properties, the HTML attributes should only be used for initial
values from the html document. When in javascript, only set
properties. Attributes are either ignored or slow.
* Styling (JS)
Use .css() instead of attr( 'style' ).
Again, setting properties instead of attributes is much faster,
easier and safer. And this way it takes care of cross-browser
issues where applicable, and less prone to error due to dealing
with key-value pairs instead of css strings.
Difference between:
elem.style.foo = 'bar';
and
elem.setAttribute( 'style', 'foo: bar;' );
* Finding (JS)
Use .find( 'foo bar' ) instead of .find( 'foo' ).find( 'bar' ).
It is CSS!
* Vendor prefixes (CSS)
It is important to always list newer (standards-compliant) versions
*after* the older/prefixed variants.
See also http://css-tricks.com/ordering-css3-properties/
So the following three:
-webkit-gradient (Chrome, Safari 4)
-webkit-linear-gradient (Chrome 10, Safari 5+)
linear-gradient (CSS3 standard)
... must be in that order.
Notes:
- "-moz-opacity" is from before Mozilla 1.7 (Firefox < 0.8)
Has not been renamed to "opacity" since Firefox 0.9.
- Removed redundant "-moz-opacity"
- Added "filter: alpha(opacity=**);" where missing
- Fixed order of css3 properties (old to new)
- Add standardized css3 versions where missing
(some 'border-radius' groups didn't have the non-prefixed version)
- Spacing
- @embed
- Shorten hex colors where possible (#dddddd -> #ddd)
$ ack '#([0-9a-f])\1{5}' --css
$ ack '#([0-9a-f])\1{2};' --css
Change-Id: I386fedb9058c2567fd0af5f55291e9859a53329d
-Selection of part of a link now modifies selection to entire link
range on inspection.
-Retaining selection direction on new range
Only partial fix to bug as previous link annotation is not
yet properly cleared.
Bug 33053 - VisualEditor: Link creation should not include trailing
spaces, and should provide a suggestion based on selected text
-Created method to return a new range without outer spaces.
-Retaining selection direction on new range.
-Enhancement needed for link suggestion.
Bug 33108 - VisualEditor: Highlighted trailing whitespace should
not have styles applied
-Modified trim method to retain selection, added call to trim
range on annotate method.
Change-Id: I92f264e19350c62b7c2ac3cd9e78af0071afef5c
This license change is aimed at maximizing the reusability of this code
in other projects. VisualEditor is more than just an awesome editor for
MediaWiki, it's the new editor for the entire internet.
Added license and author files, plus mentions of the license to all
VisualEditor PHP, JavaScript and CSS files. Parser files have not been
modified but are effectively re-licensed since there's no overriding
license information. 3rd party libraries are not changed, but are all
already MIT licensed.
Change-Id: I895b256325db7c8689756edab34523de4418b0f2
* "onevar" warning sometimes solved by just merging var statements
other times solved by making it a function declaration instead
of a function expression.
* Also fixed several '_this' variable names in ve.es.Surface to
more descriptive names, and enabled warnings for dangling _
in identifiers.
Change-Id: I7d411881e3e06cf9a7fe56d689c29375881a81de
