This is not a file we created recently, but one we care about.
This is also a nice start to get in the mood to write tests.
Bug: T289560
Change-Id: I6475b00508cfa9188ab0d78c2bfd31bab8aed6ed
This should not have any effect on how the thing looks and
behaves.
* All elements in the sidebar should be reachable with the tab
key, including disabled elements.
* Enter jumps to the corresponding paremeter in the content
area on the right. But enter doesn't change the checkbox
state.
* Space canges the checkbox.
The class will be renamed in the next patch.
Bug: T285323
Change-Id: Idc5e04828ece0ba77a65e4c839cd3ffccc3b6733
This reverts commit 0d4dee341b.
Reason for revert: This made it entirely impossible to add a
deprecated parameter, even if done intentionally. Needs more tests.
Bug: T274551
Change-Id: I7389bad0845cd1ce78f9d7ef71592cb1ce2a063e
Separation of concerns:
* The template model knows which parameters are currently used,
but doesn't know what's documented.
* The spec knows what's documented, but doesn't know what's
currently used.
Change-Id: I97cac00d6775a17a07059d0e8a7a116adc6080b3
There are some methods that behave different when a parameter
placeholder (where the parameter name is "") is present. Some
skip placeholders, some don't. This is critical to cover
before we make further changes to this class.
What I also do in this patch:
* Use shorter variable names to make the code easier to read.
* Don't reuse the `transclusionData` variable but use a copy
of the expected value. This makes the assertions much
easier to understand.
* Bring every test in the same "setup" → "execute" → "assert"
order.
Change-Id: I41a691c56bc509b132dc719ff820ae1ade4ccc3a
A lot of the checks are redundant. The first check still is
redundant because the later two cover everything as well. But
I left it for performance reasons.
Additionally:
* There was no test for the method.
* This patch also updates a few pieces of documentation in the
same class.
Change-Id: I10f2944a844cc070bdc08dec6719929b383e34fa
If a known parameter is present using one of it's aliases, then
only the aliased name should be shown to the user. This patch,
therefore, resolves the issue of the same parameter being added
to the sidebar twice.
When adding a parameter that is aliased, it will receive the same
position as the non-aliased parameter it is replacing.
Bug: T274545
Change-Id: If4e58c941fd0f0e690d3603935f5a5d3f9938163
It's allowed in values, but not in parameter names. The moment
a parameter name contains an `=` the parameter name will be cut
off at this point, and what's behind the `=` will become part
of the value.
You can test this on any live wiki. Open VisualEditor. Edit any
template. Add a parameter with a name like `a=` and some value.
Switch to wikitext mode and back. Edit the template. The `=` is
now part of the value.
Bug: T98065
Change-Id: I5e00e8fac987471243605816b041d3638927ac3b
This fixes a minor issue in the spec class. In the first step,
parameters from the template are added to the list of known
parameters. Later, aliases are resolved. The original behavior
was that such a parameter moved to the end of the list. This
is rather unexpected.
This dosn't have much of an impact. The pretty much only place
where the parameter order from the spec can be seen is in the
parameter search widget. Still I believe it's worth fixing.
Bug: T285483
Change-Id: I455818451811e92bba3e9320c2d41e1db8d563f2
I don't want this code to crash when the TemplateData API
returns an unexpected result.
Bug: T285483
Change-Id: I237cbfbb85892a53a08d9e7e34cf4974775d627a
This doesn't "extend". It was never used like this. What it
actually does is to link between a (cached) TemplateData blob
and the spec class that want's to use it.
Is this the best possible name?
* fillFromTemplateData( … )?
* propagateTemplateDocumentation( … )?
* readDocumentationFrom( templateData )?
* …?
Do we want to rename the "spec" class as well?
* MWTemplateDocumentation?
* MWTemplateMetadata?
* MWTemplateDataAccessor?
* …?
Bug: T285483
Change-Id: I6c52ef42d411c2f47fc0080768d36ebda4dd2a55
When what you type is a partial match, you can't add it as an
unknown parameter, even if that would be the correct action. The
reason for this unexpected edge-case is a mistake in the code
where a variable called "exactMatch" is set when a *partial*
"nameMatch" was found.
Bug: T285940
Change-Id: I6d12e2d7251a19d7d5f8be544c3c32a3ac14fcf0
The so called "spec" class keeps track of parameters that have
been used before, no matter if documented via TemplateData or
not. Removed parameters are still "known" (i.e. have been seen
before).
This feature allows to easily find previously used parameters
names when an undocumented parameter was removed and the user
tries to add it again.
Bug: T285483
Change-Id: Ia1555eea87cd99e7a3f386f4279ec5a80fb98a79
In I04b8a14fbec7be5a1c4defabf92e94f694c1e638 we sepearted params from
aliases. There we missed that re-filling the parameters from the
template could re-add the aliases.
Bug: T285483
Bug: T285843
Change-Id: I1928b443a5f708bc8c57efa5ad0a86b5915b159c
While the term "canonical" is not wrong, I find it still
somewhat ambiguous.
1. "Canonical" could mean different things. E.g. is the order
of parameters as they appear in the article's wikitext the
"canonical" one? It's possible to argue like this, esp. if a
template doesn't have TemplateData documentation. In this case
the only order known is the one from the wikitext.
2. "Canonical" sounds like the parameters must be reordered.
But this should never happen. Not having dirty diffs is more
important than having the parameters in a specific order.
Bug: T285483
Change-Id: I23658d37fea50b727667677ac6a49066673b2135
Wait, what's going on here? This patch looks like it changes the
behavior of this code. But it doesn't. Here is what happened
before:
* Let's say a template contains 2 parameters, A and B.
* We don't know yet if these names are aliases.
* getParameterNames() returns [ "A", "B" ].
* extend() is called. The TemplateData documentation contains
the parameters "B" and "C". "C" does have an alias "A".
* extend() can't find "C" and adds it to the end, as if it's a
new parameter.
* extend() also iterates the aliases. For each alias it creates
a reference to the specification object. In this case a
reference from "A" to "C" is created.
* But "A" already exists. The position of "A" doesn't change,
but the specification now says it's an alias.
* getParameterNames() skips aliases. It skips "A" and instead
returns the new "C" from the end of the list.
This was the behavior before. It's unchanged, proven by the tests.
Change-Id: I04b8a14fbec7be5a1c4defabf92e94f694c1e638
The idea is to not actually store all these default values, but
fall back to the default only when needed.
Some more details:
* The only remaining property is ….name. The only reason to
have this property is to distinguish between aliases and
primary parameter names. This will be reworked in a later
patch.
* The description falls back to null because this is the
documented fallback, not undefined.
* The default value falls back to "", same as the auto-value.
Why not null you might ask. This is intentional. Both the
auto- and default value are effectively wikitext snippets,
while the example is a label in the VE UI.
Bug: T285483
Change-Id: I1be3cca18f9ad6fc1c16362b24633f7613f02539
This is done for two reasons:
1. It fixes the behavior of two methods in rare edge-case
situations. They aren't documented to return undefined.
2. It reduces the amount of stuff this class stores when it's
nothing but a default value anyway. Note this patch does this
for the template-level properties only. Another patch will do
the same for the parameter-level properties.
Bug: T285483
Change-Id: If2e4d56da1fa52e32dc94191f36d7dc6a1487829
This reflects much better how this method is meant to behave.
Note I will continue to remove documentation that doesn't
explain anything in addition to what the code already says.
Bug: T285483
Change-Id: I81fa8a5d9d0752f3aeac4015c9a27b50e054d4df
This patch also marks 2 methods as @private that are not and
should not be used outside of this class.
Bug: T285483
Change-Id: I8a8ffc4868a369b5c47068beb0e83f023872543d
This reverts the revert commit d47b95eb4a.
When no `paramOrder` is given, known parameters should appear in the
order returned from the TemplateData API.
Previously, when TemplateData was present but no paramOrder
specified, then the parameters would appear in alphabetical order as
"unknown" parameters. Now they will appear in the order listed in
TemplateData. This is similar to the fully-specified behavior when
paramOrder is present.
This will only affect the Visual Editor template dialog, and has no
effect on serialization.
Bug: T274545
Change-Id: If8315781572af688ea1c1b14b3694b828f076b4a
The results show that parameter order always follows the appearance
in the template invocation, regardless of `paramOrder`, whether the
parameters are aliased, or whether there are unknown params.
Bug: T285382
Change-Id: I76c6fe8f0a2482cf0856bbafd9f21ba9fc4919a4
When no `paramOrder` is given, known parameters should appear in the
order returned from the TemplateData API.
Previously, when TemplateData was present but no paramOrder
specified, then the parameters would appear in alphabetical order as
"unknown" parameters. Now they will appear in the order listed in
TemplateData. This is similar to the fully-specified behavior when
paramOrder is present.
This will only affect the Visual Editor template dialog.
Bug: T274545
Change-Id: I32538de07641c288081042a41fe39eedfed7d939
Note that the tests expose a bug, getAllParametersOrdered fails to
list an unused parameter. Fixed in I32538de07641c.
Also, a minor fix to avoid an impossible template spec: paramOrder
must include all parameters.
Bug: T274545
Change-Id: Icfa7a765773d04ef05a76ecc09467305e311f6cb
This will avoid that the search breaks in edge cases where symbols
are used.
Including a fallback for ES5 browsers. The fallback should cover
almost all cases. Worst case would be not adding the asterisk even
though it might be valid.
Bug: T284554
Change-Id: Ie4aee0b77492b7a73bc251a8723a206dbd641600
This not really just a checkbox widget anymore it inherits from
FieldLayout and became something more in that direction.
Let's use a mixture of these things to make it a bit clearer.
See also comment in Ie81b84be288553343017c4aaf8691c4e266995f5
Change-Id: Iff1746a8e5e94b56eb6c27465405aaf6b74c2310
Introduces new widgets forming the backbone of the experimental
template dialog sidebar.
FIXME: `text-overflow: ellipsis` is not working yet, the container
styles need adjustment.
Bug: T274543
Change-Id: Ie81b84be288553343017c4aaf8691c4e266995f5
