* Summary label is now placeholder text
* Edit summary and options are visually connected
* Added summary length count-down label
* Removed check-mark icons from toolbar and dialog save buttons
* Made toolbar and dialog save buttons the same size
* Reduced line-height and margins of license information
* Changed from X icon for close (which might be confused with cancel) to ^ icon for collapse
Change-Id: Ib1711f49af8929be12796aecdea49467b726856e
* When you visit the page with url# (empty target) it scrolls down - which made setting the URL of the namespace tab to # really bad, plus it was useless since we already handle that click using JS
* Found that this.$toolbarWrapper wasn't pointing to the right place because of a missing .end() call at the end of a chain of jQuery madness
Change-Id: I7dc6953e39d4081f1b91a351bb830e4c18f7b988
* Made vector specific styles only active in the vector skin
* Added apex specific styles
* Removed override of text size for document node
* Added stylesheet for stand-alone to specify text size for document node
Change-Id: I8a57918912499f9453a5692ff45a04a16ed34cde
Refactor:
* ve.indexOf
Renamed from ve.inArray.
This was named after the jQuery method which in turn has a longer
story about why it is so unfortunately named. It doesn't return
a boolean, but an index. Hence the native method being called
indexOf as well.
* ve.bind
Renamed from ve.proxy.
I considered making it use Function.prototype.bind if available.
As it performs better than $.proxy (which doesn't use to the native
bind if available). However since bind needs to be bound itself in
order to use it detached, it turns out with the "call()" and
"bind()" it is slower than the $.proxy shim:
http://jsperf.com/function-bind-shim-perf
It would've been like this:
ve.bind = Function.prototype.bind ?
Function.prototype.call.bind( Function.prototype.bind ) :
$.proxy;
But instead sticking to ve.bind = $.proxy;
* ve.extendObject
Documented the parts of jQuery.extend that we use. This makes it
easier to replace in the future.
Documentation:
* Added function documentation blocks.
* Added annotations to functions that we will be able to remove
in the future in favour of the native methods.
With "@until + when/how".
In this case "ES5". Meaning, whenever we drop support for browsers
that don't support ES5. Although in the developer community ES5 is
still fairly fresh, browsers have been aware for it long enough
that thee moment we're able to drop it may be sooner than we think.
The only blocker so far is IE8. The rest of the browsers have had
it long enough that the traffic we need to support of non-IE
supports it.
Misc.:
* Removed 'node: true' from .jshintrc since Parsoid is no longer in
this repo and thus no more nodejs files.
- This unraveled two lint errors: Usage of 'module' and 'console'.
(both were considered 'safe globals' due to nodejs, but not in
browser code).
* Replaced usage (before renaming):
- $.inArray -> ve.inArray
- Function.prototype.bind -> ve.proxy
- Array.isArray -> ve.isArray
- [].indexOf -> ve.inArray
- $.fn.bind/live/delegate/unbind/die/delegate -> $.fn.on/off
Change-Id: Idcf1fa6a685b6ed3d7c99ffe17bd57a7bc586a2c
* Restricting "camelcase":
No changes, we were passing all of these already
* Explicitly unrestricting "forin" and "plusplus"
These are off by default in node-jshint, but some distro of jshint
and editors that use their own wrapper around jshint instead of
node-jshint (Eclipse?) may have different defaults. Therefor
setting them to false explicitly. This also serves as a reminder
for the future so we'll always know we don't pass that, in case
we would want to change that.
* Fix order ("quotemark" before "regexp")
* Restricting "unused"
We're not passing all of this, which is why I've set it to false
for now. But I did put it in .jshintrc as placeholder.
I've fixed most of them, there's some left where there is no clean
solution.
* While at it fix a few issues:
- Unused variables ($target, $window)
- Bad practices (using jQuery context for find instead of creation)
- Redundant /*global */ comments
- Parameters that are not used and don't have documentation either
- Lines longer than 100 chars @ 4 spaces/tab
* Note:
- ve.ce.Surface.prototype.onChange takes two arguments but never
uses the former. And even the second one can be null/undefined.
Aside from that, the .change() function emits
another event for the transaction already. Looks like this
should be refactored a bit, two more separated events probably
or one that is actually used better.
- Also cleaned up a lot of comments, some of which were missing,
others were incorrect
- Reworked the contentChange event so we are no longer using the
word new as an object key; expanded a complex object into multiple
arguments being passed through the event to make it easier to work
with and document
Change-Id: I8490815a508c6c379d5f9a743bb4aefd14576aa6
Stack traces, line numbers, etc. All the approaches I've seen are bad hacks. This is the best way to go.
Change-Id: Ib12e9d2ecfe610bcc89d046005e35cc13efa3d99
Throwing strings is bad because it doesn't include a lot of important
information that an error object does, such as a stack trace or where
the error was actually thrown from.
ve.Error inherits directly from Error. In the future we may create
more specific subclasses and/or do custom stuff.
Some interesting reading on the subject:
* http://www.devthought.com/2011/12/22/a-string-is-not-an-error/
Change-Id: Ib7c568a1dcb98abac44c6c146e84dde5315b2826
* Use 'href' of #ca-edit instead of constructing it manually.
MediaWiki's output of #ca-edit already takes care of all needed
queries, including "oldid" (bug 38125).
* Misc clean up:
- Use .get() instead of accessing the array directly.
* Clean up setupSkinTabs and add more inline documentation.
Change-Id: I7d702a3eb1f9ce23a5e3c9e846b00da5cead386e
* There were only 3 files with single quotes, fixed them all.
* Added option to .jshintrc (be sure to use the latest version of
node-jshint since this is a fairly new addition to the library).
Change-Id: I8bf8895ce56bf86e3bed244279a9d32269e44763
* Default value of wgVisualEditorParsoidURL is broken.
Slash is needed, else Api will request to
http://hostnamePageName
Roan says double slashes are okay, and look cleaner than string
search checks etc.
* Use .clone() for mw.Uri instead of converting to string
and letting mw.Uri parse it, again. Clone creates a basic
instance and copies over properties internally (deep copy,
no references).
* No need for hasOwnProperty (and its potential issues)
* Code clean up
- Whitespace consistency
- Variable hosting
- Remove redundant `return false;` statements in event handlers
e.preventDefault() is a jQuery.Event method that takes care
of cross-browser issues.
- Same for e.keyCode||e.which thing, this is already normalized
by jQuery.Event
- Add missing parameter to setTimeout
- Consistent order in success/error handlers in $.ajax options
Change-Id: I5bc24e0cbdf01b3704d4ccb0b45b3052e3b58694
Also:
* Removed a lot of dead code in Surface that was used in the now dead and gone sandbox.
* Changed from throwing an exception when calling getBalancedData on a range that produces no results from selectNodes to just returning []
Change-Id: Icf27094724eae5b90eec21308f9e26afe877e3ee
* Classicifation (JS)
Use addClass instead of attr( 'class' ) whenever possible.
addClass will manipulate the properties directly instead of
(re-)setting an attribute which (most) browsers then sync
with the properties.
Difference between:
elem.className
and
elem.setAttribute( 'class', .. );
Just like .checked, .value, .disabled and other interactive
properties, the HTML attributes should only be used for initial
values from the html document. When in javascript, only set
properties. Attributes are either ignored or slow.
* Styling (JS)
Use .css() instead of attr( 'style' ).
Again, setting properties instead of attributes is much faster,
easier and safer. And this way it takes care of cross-browser
issues where applicable, and less prone to error due to dealing
with key-value pairs instead of css strings.
Difference between:
elem.style.foo = 'bar';
and
elem.setAttribute( 'style', 'foo: bar;' );
* Finding (JS)
Use .find( 'foo bar' ) instead of .find( 'foo' ).find( 'bar' ).
It is CSS!
* Vendor prefixes (CSS)
It is important to always list newer (standards-compliant) versions
*after* the older/prefixed variants.
See also http://css-tricks.com/ordering-css3-properties/
So the following three:
-webkit-gradient (Chrome, Safari 4)
-webkit-linear-gradient (Chrome 10, Safari 5+)
linear-gradient (CSS3 standard)
... must be in that order.
Notes:
- "-moz-opacity" is from before Mozilla 1.7 (Firefox < 0.8)
Has not been renamed to "opacity" since Firefox 0.9.
- Removed redundant "-moz-opacity"
- Added "filter: alpha(opacity=**);" where missing
- Fixed order of css3 properties (old to new)
- Add standardized css3 versions where missing
(some 'border-radius' groups didn't have the non-prefixed version)
- Spacing
- @embed
- Shorten hex colors where possible (#dddddd -> #ddd)
$ ack '#([0-9a-f])\1{5}' --css
$ ack '#([0-9a-f])\1{2};' --css
Change-Id: I386fedb9058c2567fd0af5f55291e9859a53329d
-Bug 38042
Save dialog description field doesn't respond to 'Enter' or 'Return' keys
-Bug 38621
Pressing 'Esc' in Save-dialog should exit saving, return to editor
Change-Id: I9c43c6c9f2f2b538becc4fbbce1eda6e918d4879
'''Kranitor commits''' are commits by Krinkle with his janitor hat on.
Must never contain functional changes mixed with miscellaneous changes.
.gitignore:
* Add .DS_Store to the ignore list so that browsing the directories
on Mac OS X, will not add these files to the list of untracked
files.
* Fix missing newline at end of file
.jshintrc
* raises -> throws
* +module (QUnit.module)
* remove 'Node' (as of node-jshint 1.7.2 this is now part of
'browser:true', as it should be)
Authors:
* Adding myself
MWExtension/VisualEditor.php
* Fix default value of wgVisualEditorParsoidURL to not
point to the experimental instance in WMF Labs.
Issues:
* ve.ce.TextNode:
- Fix TODO: Don't perform a useless clone of an already-jQuerified object.
- Use .html() to set html content instead of encapsulating between
two strings. This is slightly faster but more importantly safer,
and prevents situations where the resulting jQuery collection
actually contains 2 elements instead of 1, thus messing up
what .contents() is iterating over.
* ve.ce.Document.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.Document.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.Transaction.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.TransactionProcessor.test.js
- Fix: ReferenceError: assert is not defined
* ext.visualEditor.viewPageTarget
- Missing dependency on 'mediawiki.Title'
Code conventions / Misc cleanup
* Various JSHint warnings.
* Whitespace
* jQuery(): Use '<tag>' for element creation,
use '<valid><xml/></valid>' for parsing
* Use the default operator instead of ternary when the condition and
first value are the same.
x = foo ? foo : bar; -> x = foo || bar;
Because contrary to some programming language (PHP...), in JS the
default operator does not enforce a boolean result but returns the
original value, hence it being called the 'default' operator, as
opposed to the 'or' operator.
* No need to call addClass() twice, it takes a space-separated list
(jQuery splits by space and adds if needed)
* Use .on( event[, selector], fn ) instead of the deprecated
routers to it such as .bind(), .delegate() and .live().
All these three are now built-in and fully compatible with .on()
* Add 'XXX:' comments for suspicious code that I don't want to change
as part of a clean up commit.
* Remove unused variables (several var x = this; where x was not
used anywhere, possibly from boilerplate copy/paste)
* Follows-up Trevor's commit that converts test suites to the new
QUnit format. Also removed the globals since we no longer use those
any more.
Change-Id: I7e37c9bff812e371c7f65a6fd85d9e2af3e0a22f
This should make it much simpler to keep MediaWiki specifics out of VisualEditor, which will in turn make it easier to integrate VisualEditor into another platform.
Change-Id: I073e9737b37c28af889f2457d10b082cefd0d63b
- Attaching save dialog to toolbar wrapper vs toolbar itself.
- Attaching surface specific toolbar wrapper vs all toolbar wrappers
in the case of multiple editors on the page.
Change-Id: Ic81f5a680f5593c71c27b7d47fe246487eebd4a3
This license change is aimed at maximizing the reusability of this code
in other projects. VisualEditor is more than just an awesome editor for
MediaWiki, it's the new editor for the entire internet.
Added license and author files, plus mentions of the license to all
VisualEditor PHP, JavaScript and CSS files. Parser files have not been
modified but are effectively re-licensed since there's no overriding
license information. 3rd party libraries are not changed, but are all
already MIT licensed.
Change-Id: I895b256325db7c8689756edab34523de4418b0f2
* "onevar" warning sometimes solved by just merging var statements
other times solved by making it a function declaration instead
of a function expression.
* Also fixed several '_this' variable names in ve.es.Surface to
more descriptive names, and enabled warnings for dangling _
in identifiers.
Change-Id: I7d411881e3e06cf9a7fe56d689c29375881a81de
Fixed by adding the specialMessages module which is only loaded once the
editor loads. Then after it's loaded we use the summary message from
there to update the (possibly broken) summary message in the save
dialog.
Change-Id: I67f5c59501cdf7c66c925cef8d4dd42b0f2cfde3
to update save dialog checkbox with correct watched state.
Call mw.page.watch.updateWatchLink onSave to refresh icon
with watched state.
Patchset 2- updated event name
Change-Id: I23ef1aad9c8ace13df1b9a6bf0bfeddb9d8bcb37
