Based on https://github.com/ccampbell/mousetrap.
Cleaned up to fit our coding standards, pass JSHint, and assume
jQuery's fixes where possible (e.g. no need for an addEvent
utility, no need for filling e.target, e.which, etc. cross-browser
which jQuery.Event already does).
Initially all were local functions in the constructor, but to
allow some customisations in subclasses moved various methods
to the prototype instead and marked with @private.
Really, only .register() must be called from the outside. The rest
assumes normalisation etc. or might break things if called
incorrectly.
Change-Id: Ic69a3c70759052094aefbeab623d885f8b118e14
This is the outer range of the parent of the node, if known. We'll need
this for change marking: when resizing a text node, for instance, we
need to mark its containing parent. This way we get the containing
parent's element's offset for free (selectNodes already tracks it in
currentFrame) rather than having to compute it with another traversal.
Change-Id: Ia335d8080ea9d414ab9f89b943e2ea0cd11d7df3
Some tests were using the wrong node in the expected data, but because
only the summaries were compared, this would succeeed as long as the
type and length were equal (and paragraphs of length 1 are quite common
in our test data). Fixed equalNodeSelection() to compare each node by
reference as well as comparing the summaries. If one of the equality
tests fails, the summaries will still be displayed as expected/actual
data (even though they might be equal), and the message will have
"(reference equality for selection[3].node)" appended to it.
This change broke the tests because a few test cases had bad data, fixed
those in this commit as well.
Change-Id: Iab420cf29d47f7368c8a9ce79f6309efae75685c
For <p>1<br/>2</p>, selectNodes([2,2]) correctly returned the end of the
first text node, but selectNodes([4,4]) returned index 2 in the
paragraph (i.e. between the break node and the second text node). The
correct behavior is to return the start of the second text node, i.e.
the mirror image of the behavior for [2,2].
Fixed this by applying the startBetween/endBetween logic only if the
relevant adjacent node is wrapped (or if it's missing). In the code,
this is expressed as !(adjacent node present && adjacent node wrapped).
Change-Id: Ie3b7fdf1de38ee253a798a7a73bc89734f4ca4fa
The HTML "1<br/>2" was being converted to a linmod that looked like
"<p>1</p><br></br><p>2</p>". This commit fixes the wrapping logic such
that the result is "<p>1<br></br>2</p>" instead. In general, inline
nodes (content nodes) should not interrupt the wrapping, but block nodes
should.
This creates a problem for alien nodes: normally, we determine whether an
alien node is a block alien or an inline alien based on context, but if
we're in wrapping mode we're unsure of the context. We can't tell the
difference between "1<tt>Foo</tt>2" (should be wrapped as one, because
tt is inline) and "1<figure></figure>2" (1 and 2 should be wrapped
separately, because figure is block) using context alone, so in these
cases (and ONLY in these cases) we look up whether the HTML tag in
question is an inline tag or a block tag and use that to decide.
Change-Id: I75e7f3da387dd401d9b93e09a21751951eccbb83
* CenterNode missing in ResourceLoader registry
* UI classes and rangy not in static test/index.html
* Transaction and TransactionProcessor listed twice
Added a maintenance script that generates the <script> and <link> tags for all
files in the same order everywhere.
Change-Id: I5d22d33769b4e356e8065d295505f6f9a8b0bea8
Also changed from using "type" to "name" to make it less specific and added a test to make sure it's working.
Change-Id: I150a7ab1a57b3df85b459dbc411c2eaefe08b5bb
This changes ve.dm.LinkAnnotation to be a generic annotation for <a>
tags, and adds ve.dm.MWInternalLinkAnnotation and
ve.dm.MWExternalLinkAnnotation as MW-specific subclasses. This nicely
splits out the MW-specific parts in LinkAnnotation, and ideally we'd
also move these files somewhere else to reflect their MW-specificity,
but I haven't gotten to that yet.
Similarly, ve.dm.TextStyleAnnotation is now a generic base class for
simple tag-only-no-metadata annotations, and it has 11 subclasses, one
for each tag we support. This is quite a bit more verbose than the
previous code, but I think it's cleaner and more flexible. I considered
writing a function that would generate a TextStyleAnnotation subclass,
then calling that 11 times, but that's not possible if we want to keep
named functions for the constructors.
Change-Id: Ifba10153eef40280e44025dd72d4e9d9f33b0632
Fleshes out ve.dm.Annotation to a class. Annotations in the linear model
will be instances of a subclass of ve.dm.Annotation. Annotations are
defined by subclassing ve.dm.Annotation and registering this subclass
with ve.dm.AnnotationFactory.
ve.dm.AnnotationFactory keeps track of which annotation classes are known,
and has code to match an HTML element to an annotation class, for use in
the converter.
Change-Id: I68802bdb8736ced1f9e04ee49c623944b448141c
Utility function to generate an opening HTML tag. Needed to integrate
the new annotation API with ve.ce.TextNode
Change-Id: I6804bbf6f79346fde1887fa82d29ec5cd0342d60
Previously, Undo used a transaction's lengthDifference to calculate the selection to display after the transaction was undone. Now, translateOffset with the reversed boolean set to true will properly translate the inverse of a transaction's selection change. Fixes bug #40538
Change-Id: I110bc0cbb5824547842efd391b9f2948b037b758
We were populating empty content nodes with zero-length text nodes to
make round-trip tests in the test suite work (otherwise blanking a
paragraph leaves behind a zero-length text node whereas creating an
empty paragraph does not), but the empty nodes are causing problems in
CE apparently.
* Do not create empty text nodes when constructing a node tree
* Be more careful with text-only replacements:
** Don't resize a text node to zero, remove it instead
** There may not be a text node to resize at all, build it in that case
** Switch nodeRange to nodeOuterRange, this was probably broken before
Tests:
* Change test case for zero-length text node to assert that there is
*no* zero-length text node :)
* Remove a test case concerning an empty text node from the
ve.ce.TextNode suite
Change-Id: Ie677457f2f0a7823a517ba3077b844ef52a20fcc
Previously tests for inheritClass (and other object management
utilities) were absent (as they were copied from upstream K-js).
I've copied the upstream test suite for this method here and
extended it with tests for this new feature.
Had to add es5:true to .jshintrc due to a bug in JSHint.
Repeated the setting in ve.inheritClass for future reference.
Source: https://github.com/Krinkle/K-js/blob/master/test/K.test.js
Change-Id: I63ac620d6ce7832ebfee454ddf7b7c90f6eb6121
This works just fine, as also previously tested/proven by
ve.cloneObject, which uses the same concept of creating an object
identical to what invoking the constructor with "new" would do,
but without invoking the constructor function (which has side-
effects).
Except in this case we do invoke the constructor function, but
we can't use new in ve.Factory because of the arbitrary number of
arguments.
Added a test to assert that 3+ arguments and that instanceof
work as expected.
Change-Id: If0add3da7475886e476900044acda2ba7d01fb11
Add some missing constructor names and rename the ones with a
lowercase 'v'.
I previously changed Object.create and others to using hasOwn,
but that turned out to be useless. The thought at the time was
to only use the native one if it really is a native one (and not
a polyfill from another script), however in then hasOwn is only
relevant on prototypes and when negated. For static members it
would be an own-property either way.
Follows-up:
* Id6783fcfc35a896db088ff424ff9faaabcaff716 (metanode)
* Iab763954fb8cf375900d7a9a92dec1c755d5407e (object-management)
Change-Id: Ia6ef597e5e5453277472dfc23f25d2878b68b7f6
Rather than each tool requesting annotations, and nodes pertaining to selection,
Emitted event supplies annotations and nodes to each tool's update method.
Using select vs. of traverseLeafNodes for code optimization.
Better documentation for updateTools()
Removed unneeded code.
Change-Id: I7c0baa1cc0f7fb731d6e28b175a76e931e9e2961
* Added documentation for ve.AnnotationSet
* Replaced uses of "// Inheritance" with "// parent Constructor"
* Added "// Mixin constructor" where needed
* Added missing section comments like "/* Static Methods */"
* Cleaned up excessive newlines (matching /\n\n\n/g)
* Put unnecessarily multi-line statements on a single line
Change-Id: I2c9b47ba296f7dd3c9cc2985581fbcefd6d76325
* Commands for Sublime:
Find*: "(\* @[a-z]+) ([^{].*) \{(.*)\}"
Replace: "$1 {$3} $2"
Save all && Close all
Find: " function("
Replace: " function ("
Save all && Close all
Find: "Intialization"
Replace: "Initialization"
Save all && Close all
* Consistent use of types (documented in CODING.rm):
- Merged {Integer} into {Number}.
- Merged {DOM Node} into {DOMElement}.
* Remove work-around /*jshint newcap: false */ from ve.js
Calling Object() as a function to to use the internal
toObject no longer throws a newcap warning in JSHint.
It only does that normal functions now .
(e.g. var a = Cap(); or var a = new uncap();)
* Add missing annotations (@static, @method, ..).
* Remove unused variables
* Remove null-assignments to variables that should just be
undefined. There's a few variables explicitly set to null
whereas they are set a few lines under and not used otherwise
(e.g. 'tx' in ve.ce.Surface.prototype.onPaste)
Change-Id: I0721a08f8ecd93c25595aedaa1aadb0e08b83799
This node type represents <meta> or <link> (transparently, based on the
style attribute). I had to make two node types for this and hack the
toData conversion code directly into ve.dm.Converter, because we don't
have native support for node types that can be both inline and block.
(We should add this in the node API rewrite.)
The CE implementation renders a placeholder (with the same styles as an
alien node) right now. I'm not sure how nice that is, but it's better
than rendering raw <meta>/<link> tags.
This whole thing is a total pile of hacks to make VE deal with
<meta>/<link> tags until we have a proper node types API.
Change-Id: Id6783fcfc35a896db088ff424ff9faaabcaff716
This was broken in three different ways:
* On the way in, we were applying whitespace to an array of elements
rather than the actual element, so the whitespace wasn't stored.
* Whitespace processing on the way out was skipped for aliens because
they had their own code path. Refactored this so alien openings and
regular openings share much more code, including whitespace output.
* Somewhat unrelatedly, innerPost output was broken for paragraphs
containing inline elements, because the inline elements' processing
polluted lastOuterPost. Discovered this because my test with inline
aliens also happened to be the first test of whitespace preservation
in paragraphs with inline content elements. Fixed by explicitly
skipping content nodes when outputting whitespace.
Fixed these issues and added a test case.
Change-Id: I8edb61a008e60ace886b1a841b3417682ec39c32
* For the most common case:
- replace ve.extendClass with ve.inheritClass (chose slightly
different names to detect usage of the old/new one, and I
like 'inherit' better).
- move it up to below the constructor, see doc block for why.
* Cases where more than 2 arguments were passed to
ve.extendClass are handled differently depending on the case.
In case of a longer inheritance tree, the other arguments
could be omitted (like in "ve.ce.FooBar, ve.FooBar,
ve.Bar". ve.ce.FooBar only needs to inherit from ve.FooBar,
because ve.ce.FooBar inherits from ve.Bar).
In the case of where it previously had two mixins with
ve.extendClass(), either one becomes inheritClass and one
a mixin, both to mixinClass().
No visible changes should come from this commit as the
instances still all have the same visible properties in the
end. No more or less than before.
* Misc.:
- Be consistent in calling parent constructors in the
same order as the inheritance.
- Add missing @extends and @param documentation.
- Replace invalid {Integer} type hint with {Number}.
- Consistent doc comments order:
@class, @abstract, @constructor, @extends, @params.
- Fix indentation errors
A fairly common mistake was a superfluous space before the
identifier on the assignment line directly below the
documentation comment.
$ ack "^ [^*]" --js modules/ve
- Typo "Inhertiance" -> "Inheritance".
- Replacing the other confusing comment "Inheritance" (inside
the constructor) with "Parent constructor".
- Add missing @abstract for ve.ui.Tool.
- Corrected ve.FormatDropdownTool to ve.ui.FormatDropdownTool.js
- Add function names to all @constructor functions. Now that we
have inheritance it is important and useful to have these
functions not be anonymous.
Example of debug shot: http://cl.ly/image/1j3c160w3D45
Makes the difference between
< documentNode;
> ve_dm_DocumentNode
...
: ve_dm_BranchNode
...
: ve_dm_Node
...
: ve_dm_Node
...
: Object
...
without names (current situation):
< documentNode;
> Object
...
: Object
...
: Object
...
: Object
...
: Object
...
though before this commit, it really looks like this
(flattened since ve.extendClass really did a mixin):
< documentNode;
> Object
...
...
...
Pattern in Sublime (case-sensitive) to find nameless
constructor functions:
"^ve\..*\.([A-Z])([^\.]+) = function \("
Change-Id: Iab763954fb8cf375900d7a9a92dec1c755d5407e
Introduced the ve.AnnotationSet class to manage sets of annotations. This
is a generalization of ve.OrderedHashSet, a class that manages a set
using an array and an object keyed by hash.
Converted everything that stores, tracks or passes around annotations to
use ve.AnnotationSet. In particular, this means the linear model now
contains AnnotationSets instead of hash-keyed objects.
This allows us to maintain the order of annotations in the linear model,
and will help fix bugs with annotation ordering and splitting.
Change-Id: I50975b0a95f4cc33017a0b59fdede9ed1eff0124
[jshint]
ce/ve.ce.Surface.js: line 670, col 9, Too many var statements.
ce/ve.ce.Surface.js: line 695, col 6, Missing semicolon.
ce/ve.ce.Surface.js: line 726, col 22, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 726, col 41, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 733, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 734, col 24, Expected '===' and instead saw '=='.
ce/ve.ce.Surface.js: line 1013, col 13, Too many var statements.
ce/ve.ce.Surface.js: line 1019, col 17, Too many var statements.
ce/ve.ce.Surface.js: line 1023, col 18, Too many ar statements.
ce/ve.ce.Surface.js: line 1027, col 13, Too many var statements.
dm/annotations/ve.dm.LinkAnnotation.js: line 70, col 52, Insecure '.'.
dm/ve.dm.Converter.js: line 383, col 29, Empty block.
dm/ve.dm.Converter.js: line 423, col 33, Empty block.
Commands:
* jshint .
* ack '(if|else|function|switch|for|while)\('
* Sublime Text 2:
Find(*): (if|else|function|switch|for|while)\(
Replace: $1 (
* ack ' ' -Q # double spaces, except in certain comments
Change-Id: I8e34bf2924bc8688fdf8acef08bbc4f6707e93be
This will cause ve.dm.SurfaceFragment.prototype.insertContent() to place
the selection after the insertion as well.
Change-Id: Ifa7e627daceb90408422eb58c110d475f34ba1e2
* Replaces c8b4a28936
* Use Object() casting to detect objects instead of .constructor
(or instanceof). Both .constructor and instanceof compare by reference
the type "Object" which means if the object comes from another window
(where there is a different "Object" and "Object.prototype") it will
drop out of the system and go freewack.
Theory: If a variable casted to an object returns true when strictly compared
to the original, the input must be an object.
Which is true. It doesn't change the inheritance, it doesn't make it inherit
from this window's Object if the object is from another window's object. All it
does is cast to an object if not an object already.
So e.g. "Object(5) !== 5" because 5 is a primitive value as opposed to an instance
of Number.
And contrary to "typeof", it doesn't return true for "null".
* .constructor also has the problem that it only works this way if the
input is a plain object. e.g. a simple construtor function that creates
an object also get in the wrong side of the if/else case since it is
an instance of Object, but not directly (rather indirectly via another
constructor).
* Added unit tests for basic getHash usage, as well as regression tests
against the above two mentioned problems (these tests fail before this commit).
* While at it, also improved other utilities a bit.
- Use hasOwnProperty instead of casting to boolean
when checking for presence of native support.
Thanks to Douglas Crockford for that tip.
- Fix documentation for ve.getHash: Parameter is not named "obj".
- Add Object-check to ve.getObjectKeys per ES5 Object.keys spec (to match native behavior)
- Add Object-check to ve.getObjectValues to match ve.getObjectKeys
- Improved performance of ve.getObjectKeys shim. Tried several potential optimizations
and compared with jsperf. Using a "static" reference to hasOwn improves performance
(by not having to look it up 4 scopes up and 3 property levels deep).
Also using [.length] instead of .push() shared off a few ms.
- Added unit tests for ve.getObjectValues
Change-Id: If24d09405321f201c67f7df75d332bb1171c8a36
This commit fully utilizes all four positions in the internal.whitespace
array. Outer whitespace is now preserved as well, and is duplicated
either in the adjacent sibling (one node's outerPost is the next
sibling's outerPre) or in the parent (a branch node's innerPre is its
first child's outerPre, and its innerPost is its last child's
outerPost). Before restoring saved whitespace, we check that these two
agree with each other, and if they disagree we assume the user has been
moving stuff around and don't restore any whitespace in that spot. The
whitespace at the very beginning and the very end of the document (i.e.
the first node's outerPre and the last node's outerPost) isn't
duplicated anywhere, nor is inner whitespace in content nodes.
The basic outline of the implementation is:
* When we encounter whitespace, strip it and store it in the previous
node's outerPost. Also store it in nextWhitespace so we can put it in
the next node's outerPre once we encounter that node.
* When we encounter whitespace in wrapped bare text, we don't know in
advance if it's gonna be succeeded by more non-whitespace (in which
case it needs to be output verbatim), or not (in which case it's
leading whitespace and needs to be stripped and stored). The fact that
annotations are nodes in HTML makes this trickier. So we write the
whitespace to the temporary linmod and store it in wrappedWhitespace,
then if it turns out to be trailing whitespace we take it back out of
the data array and record it the usual way.
* Because text nodes can contain any combination of leading whitespace
actual text and trailing whitespace, and because we may or may not
already have opened a wrapping paragraph, there are a lot of different
combinations to handle. We handle all of them but the resulting code
is pretty dense and verbose.
More low-level list of changes:
In getDataFromDom():
* Added helper function addWhitespace() for storing whitespace for an
element
* Added helper function processNextWhitespace() for processing any
whitespace passed on from the previous node via the nextWhitespace var
* Rename paragraph to wrappingParagraph. Make wrapping default to
alreadyWrapped so we can simplify wrapping||alreadyWrapped and
!wrapping&&!alreadyWrapped. Add wrappingIsOurs to track whether the
wrapping originated in this recursion level (needed for deciding when
to close the wrapper).
* Add prevElement to track the previous element so we can propagate
whitespace to it, and nextWhitespace so we can propagate whitespace to
the next element.
* Remove previous newline stripping hacks
* Integrate the logic for wrapping bare content with the outer
whitespace preservation code
* Remove wrapperElement, no longer needed because we have a dedicated
variable for the wrapping paragraph now and what was previously inner
whitespace preservation for wrapper paragraphs is now covered by the
outer whitespace preservation code.
In getDomFromData():
* Reinsert whitespace where appropriate
** outerPre is inserted when opening the element
** This covers outerPost as well except for the last child's outerPost,
which is handled as the parent's innerPost when closing the parent.
** innerPre and innerPost are inserted when closing the element. Care is
taken not to insert these if they're duplicates of something else.
* Propagate each node's outerPost to the next node (either the next
sibling or the parent) using parentDomElement.lastOuterPost. We can't
get this using .lastChild because we will have destroyed that child's
.veInternal by then, and we can't tell whether a node will be its
parent's last child when we process it (all other processing,
including first child handling is done when processing the node itself,
but this cannot be).
* Special handling is needed for the last node's outerPost, which ends
up in the container's .lastOuterPost property.
Tests:
* Allow .html to be null in data<->DOM converter tests. This indicates
that the test is a one-way data->DOM test, not a DOM->data->DOM
round-trip test. The data will be converted to HTML and checked
against .normalizedHtml
* Update existing tests as needed
* Add tests for outer whitespace preservation and storage
* Add test for squashing of whitespace in case of disagreement (this
requires .html=null)
Change-Id: I4db4fe372a421182e80a2535657af7784ff15f95
data-mw-gc is ancient and unused. We do need to detect and alienate
generated nodes, but that is now based on RDFa types. Removing the
data-mw-gc stuff for now because it doesn't work anyway, will replace it
with proper detection later.
Replaced instances of data-mw-gc in the test suite with unregistered
node types.
Change-Id: If3f5898d382a436fa57929013264c53af5e840ba
Also:
* Made a fragment with a null range become a null fragment
* Fixed incorrect order of arguments for binding a handler to transact event
* Added getters for surface, document and range
* Fixed several instances of passing a document instead of a surface into the constructor of a new surface fragment
* Fixed closest mode in expandRange - needed to check if parent existed before checking for it's type
* Fixed uses of ve.Transaction (doesn't exist) that were supposed to be uses of ve.dm.Transaction (does exist)
Change-Id: Ide13d9d2d1637399188c98c2e8b6e0826caeecc4
When a document is created, it should take it upon itself to make sure it has a new reference to the data using slice, not place this on the caller. Callers that do not use slice will often find strange and mysterious things going on and not know why. The real reason is that multiple documents sharing a reference to the same data array leads to seriously messed up behavior.
Change-Id: Ic4e25fcd9bf3f41a805003520a8f38e2768f5dbf
domToData wraps bare content in paragraph elements, which were then
converted to <p> tags by domToData. With this fix, HTML with "missing"
<p> tags actually round-trips through the editor correctly now, rather
than having <p> tags added wherever VE believes they should exist.
* Mark generated paragraph elements with .internal.generated = 'wrapper'
** This signifies the wrapper was generated but its contents were not,
so the right thing to do when converting back to HTML is to remove
the wrapper and keep the contents. We might want to use other values
of generated in the future.
* Unwrap nodes with generated=wrapper when converting to HTML
Tests:
* Add 'generated': 'wrapper' as appropriate. Only affects 1 test
* Remove 'normalizedHtml' for this test because it is no longer needed
** Need to keep 'normalizedHtml' for now because we normalize hrefs
* Eventually the main example should test bare content, but that
requires touching a lot of stuff. The main example could use some
beefing up anyway.
Change-Id: I277ad5fe3f64e07c1bbf49007d6bbaecc90b7466
This allows us to put other internal data in there in the future. Also
passing it through the Node constructor properly now.
* ve.dm.Node
** Rename fringeWhitespace property to internal
** Add internal parameter to constructor
** Remove setFringeWhitespace()
* Increase the number of parameters passed through by ve.Factory to 3
* Pass through .internal from linmod to nodeFactory in ve.dm.Document
* ve.dm.Converter
** Rename .fringeWhitespace to .internal.whitespace and make it an array
** Store a temporary reference to .internal in domElement.veInternal
* Add internal to all node constructors except TextNode
Tests:
* Update for fringeWhitespace->internal rename
* Add third parameter to ve.Factory tests
* Add .internal to getNodeTreeSummary
Change-Id: If20c0bb78fee3efa55f72e51e7fc261283358de7
To do this, we are using the replacer callback of JSON.stringify, which is supported by all of our target browsers including IE8. We are also leaning on Object.keys and Array.reduce, the latter of which required adding a new fallback implementation for some browsers which do not support it yet.
Change-Id: Ifa285ca3da4d94d962464f09414591532bbea79c
Because the Parsoid prefix format changed from /mw:Foo to /mw/Foo , the
href format for internal links has changed from "/Foo" to "Foo". So the
href is now simply the title, except that it may be preceded by one or
more "../" if the title of the page we're on contains a '/'.
So instead of stripping the leading slash from internal link hrefs and
putting it back on the way out, only strip any leading "../"s and dump
the titles directly into the hrefs on the way out.
Also update the link test case for this, and add a test case for the ../
stripping.
Change-Id: I3e0bdde20f22cda34eb45fc351de5e780419b6a2
Annotation types with more than one slash such as 'link/ExtLink/URL'
weren't being processed correctly because .split( '/', 2 ) throws away
everything after the second slash. Instead, don't pass a limit to
.split(); the code for reconstructing a slash-separated string from
multiple components was already in place.
Also add test cases for URL links and numbered links.
(Do you like the lines-of-code to lines-of-test ratio in this commit,
Trevor? ;) )
Change-Id: I7add87396447a01b1c23a4f9bfd63d2e8fd861ce
Refactor:
* ve.indexOf
Renamed from ve.inArray.
This was named after the jQuery method which in turn has a longer
story about why it is so unfortunately named. It doesn't return
a boolean, but an index. Hence the native method being called
indexOf as well.
* ve.bind
Renamed from ve.proxy.
I considered making it use Function.prototype.bind if available.
As it performs better than $.proxy (which doesn't use to the native
bind if available). However since bind needs to be bound itself in
order to use it detached, it turns out with the "call()" and
"bind()" it is slower than the $.proxy shim:
http://jsperf.com/function-bind-shim-perf
It would've been like this:
ve.bind = Function.prototype.bind ?
Function.prototype.call.bind( Function.prototype.bind ) :
$.proxy;
But instead sticking to ve.bind = $.proxy;
* ve.extendObject
Documented the parts of jQuery.extend that we use. This makes it
easier to replace in the future.
Documentation:
* Added function documentation blocks.
* Added annotations to functions that we will be able to remove
in the future in favour of the native methods.
With "@until + when/how".
In this case "ES5". Meaning, whenever we drop support for browsers
that don't support ES5. Although in the developer community ES5 is
still fairly fresh, browsers have been aware for it long enough
that thee moment we're able to drop it may be sooner than we think.
The only blocker so far is IE8. The rest of the browsers have had
it long enough that the traffic we need to support of non-IE
supports it.
Misc.:
* Removed 'node: true' from .jshintrc since Parsoid is no longer in
this repo and thus no more nodejs files.
- This unraveled two lint errors: Usage of 'module' and 'console'.
(both were considered 'safe globals' due to nodejs, but not in
browser code).
* Replaced usage (before renaming):
- $.inArray -> ve.inArray
- Function.prototype.bind -> ve.proxy
- Array.isArray -> ve.isArray
- [].indexOf -> ve.inArray
- $.fn.bind/live/delegate/unbind/die/delegate -> $.fn.on/off
Change-Id: Idcf1fa6a685b6ed3d7c99ffe17bd57a7bc586a2c
This makes things like
== Foo ==
* Bar
render without the leading and trailing spaces, while still
round-tripping those spaces.
* Added a .fringeWhitespace property to the linear model and ve.dm.Node
** Object containing innerPre, innerPost, outerPre, outerPost
** Only inner* are used right now, outer* are planned for future use
** Like .attributes , it's suppressed if it's an empty object
* In getDataFromDom():
** Store the stripped whitespace in .fringeWhitespace
** Move emptiness check up: empty elements with .fringeWhitespace have
to be preserved
** Move paragraph wrapping up: .fringeWhitespace has to be applied to
the generated paragraph, not its parent
** Add wrapperElement to keep track of the element .fringeWhitespace has
to be added to; this is either dataElement or the generated paragraph
or nothing, but we can't modify dataElement because it's used later
* In getDomFromData():
** When processing an opening, store the fringeWhitespace data in the
generated DOM node
** When processing a closing, add the stored whitespace back in
* In the ve.dm.Document constructor, pass through .fringeWhitespace from
the linear model data to the generated nodes
Tests:
* Change one existing test case to account for this change
* Add three new test cases for this behavior
* Add normalizedHtml field so I can test behavior with bare content
Change-Id: I0411544652dd72b923c831c495d69ee4322a2c14
* Restricting "camelcase":
No changes, we were passing all of these already
* Explicitly unrestricting "forin" and "plusplus"
These are off by default in node-jshint, but some distro of jshint
and editors that use their own wrapper around jshint instead of
node-jshint (Eclipse?) may have different defaults. Therefor
setting them to false explicitly. This also serves as a reminder
for the future so we'll always know we don't pass that, in case
we would want to change that.
* Fix order ("quotemark" before "regexp")
* Restricting "unused"
We're not passing all of this, which is why I've set it to false
for now. But I did put it in .jshintrc as placeholder.
I've fixed most of them, there's some left where there is no clean
solution.
* While at it fix a few issues:
- Unused variables ($target, $window)
- Bad practices (using jQuery context for find instead of creation)
- Redundant /*global */ comments
- Parameters that are not used and don't have documentation either
- Lines longer than 100 chars @ 4 spaces/tab
* Note:
- ve.ce.Surface.prototype.onChange takes two arguments but never
uses the former. And even the second one can be null/undefined.
Aside from that, the .change() function emits
another event for the transaction already. Looks like this
should be refactored a bit, two more separated events probably
or one that is actually used better.
- Also cleaned up a lot of comments, some of which were missing,
others were incorrect
- Reworked the contentChange event so we are no longer using the
word new as an object key; expanded a complex object into multiple
arguments being passed through the event to make it easier to work
with and document
Change-Id: I8490815a508c6c379d5f9a743bb4aefd14576aa6
Stack traces, line numbers, etc. All the approaches I've seen are bad hacks. This is the best way to go.
Change-Id: Ib12e9d2ecfe610bcc89d046005e35cc13efa3d99
Throwing strings is bad because it doesn't include a lot of important
information that an error object does, such as a stack trace or where
the error was actually thrown from.
ve.Error inherits directly from Error. In the future we may create
more specific subclasses and/or do custom stuff.
Some interesting reading on the subject:
* http://www.devthought.com/2011/12/22/a-string-is-not-an-error/
Change-Id: Ib7c568a1dcb98abac44c6c146e84dde5315b2826
* There were only 3 files with single quotes, fixed them all.
* Added option to .jshintrc (be sure to use the latest version of
node-jshint since this is a fairly new addition to the library).
Change-Id: I8bf8895ce56bf86e3bed244279a9d32269e44763
This just cleans up a few places where single quotes should have been used instead of double quotes.
Change-Id: I6c53652e71ab96842ed5bb41fb1e0b8c923eb25d
Also:
* Removed a lot of dead code in Surface that was used in the now dead and gone sandbox.
* Changed from throwing an exception when calling getBalancedData on a range that produces no results from selectNodes to just returning []
Change-Id: Icf27094724eae5b90eec21308f9e26afe877e3ee
* Also update test/index.html with latest minimalistic format
* Update test suite hardcoded paths to match the definition in
VisualEditor.php for ResourceLoader
* Issues:
- 'jquery/jquery.json.js' should not be loaded directly,
using a dependency instead.
- Load scripts from the <head> in test/index.html so that
code that depends on document being ready is catches instead of
silently being ignored.
Change-Id: I5ad7390137f4d17c153a1bf69f19c4869c08e323
'''Kranitor commits''' are commits by Krinkle with his janitor hat on.
Must never contain functional changes mixed with miscellaneous changes.
.gitignore:
* Add .DS_Store to the ignore list so that browsing the directories
on Mac OS X, will not add these files to the list of untracked
files.
* Fix missing newline at end of file
.jshintrc
* raises -> throws
* +module (QUnit.module)
* remove 'Node' (as of node-jshint 1.7.2 this is now part of
'browser:true', as it should be)
Authors:
* Adding myself
MWExtension/VisualEditor.php
* Fix default value of wgVisualEditorParsoidURL to not
point to the experimental instance in WMF Labs.
Issues:
* ve.ce.TextNode:
- Fix TODO: Don't perform a useless clone of an already-jQuerified object.
- Use .html() to set html content instead of encapsulating between
two strings. This is slightly faster but more importantly safer,
and prevents situations where the resulting jQuery collection
actually contains 2 elements instead of 1, thus messing up
what .contents() is iterating over.
* ve.ce.Document.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.Document.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.Transaction.test.js
- Fix: ReferenceError: assert is not defined
* ve.dm.TransactionProcessor.test.js
- Fix: ReferenceError: assert is not defined
* ext.visualEditor.viewPageTarget
- Missing dependency on 'mediawiki.Title'
Code conventions / Misc cleanup
* Various JSHint warnings.
* Whitespace
* jQuery(): Use '<tag>' for element creation,
use '<valid><xml/></valid>' for parsing
* Use the default operator instead of ternary when the condition and
first value are the same.
x = foo ? foo : bar; -> x = foo || bar;
Because contrary to some programming language (PHP...), in JS the
default operator does not enforce a boolean result but returns the
original value, hence it being called the 'default' operator, as
opposed to the 'or' operator.
* No need to call addClass() twice, it takes a space-separated list
(jQuery splits by space and adds if needed)
* Use .on( event[, selector], fn ) instead of the deprecated
routers to it such as .bind(), .delegate() and .live().
All these three are now built-in and fully compatible with .on()
* Add 'XXX:' comments for suspicious code that I don't want to change
as part of a clean up commit.
* Remove unused variables (several var x = this; where x was not
used anywhere, possibly from boilerplate copy/paste)
* Follows-up Trevor's commit that converts test suites to the new
QUnit format. Also removed the globals since we no longer use those
any more.
Change-Id: I7e37c9bff812e371c7f65a6fd85d9e2af3e0a22f
Convert underscores in the href attribute to spaces in the linear model,
and back to underscores when going back to HTML. This ensures the link
targets displayed to and edited by the user look nice
Change-Id: I4855fce28ad8b724284c53881abc7b99b59b9079
This means we don't have to rely on data-rt.sHref. It also means that
we'll now be showing the canonical link target in the link inspector
rather than the link target as entered by the user, but that's fine.
Also change test to have href differ from sHref to show that we use
href.
Change-Id: Idabdbf2579663ef1efb47d6a73f39743c9f64f3b
This is ugly but makes things work again. I intend to clean this up once
we have a better attribute API
* Recognize mw:WikiLink, mw:SimpleWikiLink, mw:ExtLink,
mw:NumberedExtLink and mw:UrlLink
* Support is incomplete because we can't get to the annotation text with
the current API
* Preserve all unhandled attributes rather than special-casing data-mw
* Update remaining code using data-mw (sHref and stx extraction) to
account for the data-mw -> data-rt rename
* Update tests accordingly
Change-Id: Ia13d3008a6d4cdc8828f9acda5aa797566bc597f
