These are now taken care of by the Mobile-Content-Service's
summary endpoint and no longer needed here!
They are actually breaking certain previews so time for these
to go!
Bug: T183833
Change-Id: Icd2a21127c2f5881943564eca4df6bed3c15e223
This change updates the schema and begins to log
additional information such as source_namespace, id
and title. This information is provided inside the
boot action.
Additional changes:
* Allow camel case in bundle artifact
Bug: T184793
Bug: T186728
Change-Id: I425ffecc018bef2958d0dfe957a40a065e3e6c56
Don't assume that thumbnail URLs contain a dimension delimiter of "px-".
Previously, thumbnail URLs always contained the width. e.g.:
https://upload.wikimedia.org/wikipedia/commons/a/aa/100px-Red_Giant_Earth_warm.jpg
However, thumbnail URLs that actually point to the original are not
sizable:
https://upload.wikimedia.org/wikipedia/commons/a/aa/Red_Giant_Earth_warm.jpg
These are provided, for example, when the thumbnail size requested is
larger than the original. There was code designed to handle this
scenario but it only applies when RESTBase and page preview thumbnail
sizes happen to be in sync. In other words, if RESTBase requests a large
thumbnail on behalf of page previews, and page previews only requested a
small thumbnail, the original may be unexpectedly provided. A
conditional is introduced in this patch to verify that "px-" is actually
detected. If it is not present, the original is used.
Bug: T187955
Change-Id: If4e29dd870aecd6d461cc8203f6576d1bb8844f2
Pageview is consistent with verbiage used by Research and Analytics
Engineering in their reports and documentation, e.g.
https://wikitech.wikimedia.org/wiki/Analytics/Pageviews.
Bug: T184793
Change-Id: I8ae085b4af85aa72f234f3db27f0cac2c4d014e5
* New action added PREVIEW_SEEN
* The action will be used to signal that a page view needs
to be recorded.
* PREVIEW_SEEN is a delayed action which is triggered
as a side-effect of the previewShow action. It is only dispatched
if the user is still previewing the same card and the page
related to the card has preview type `page`
* The pageview changelistener is added when
$wgPopupsVirtualPageViews is set to true.
* The page view changelistener listens for page views and logs
them using EventLogging when needed using
https://meta.wikimedia.org/wiki/Schema:VirtualPageView
Note:
* Currently if a user has enabled the DNT header, the
event will not be logged. There is ongoing discussion on the
ticket and fixing this will be addressed separately.
* Only title and referrer are logged in the initial version.
The task demands that "namespace" is logged but this information
is not provided by the summary endpoints we use so will need
to be added later (if indeed needed) either via a change to that
endpoint of by using JavaScript to parse the URL.
Bug: T184793
Change-Id: Id1fe34e4bdada3a41f0d888a753af366d4756590
This change fixes some issues with assertions not running, removes
unnecessary promise dances, and improves legibility and some code
patterns in the action and integration node tests mainly.
Detailed changes:
* actions.js
* Fully migrate out of jQuery 1 promises (no done/fail)
* Fix linkDwell action not returning the fetch action promise
* actions.test.js
* Simplify setupWait for the tests
* It always autoresolves immediately the wait call to ensure speedy tests
* No waitDeferreds or waitPromises array coordination, rely on action
returned promises instead
* Get rid of that = this in favor of arrow functions
* Rename generic "p" promises to meaningful names
* Add assert.expect for more solid tests (so that we don't skip assertions in
the future if we change them)
* Fix some assertions that weren't being run because of the incorrect promise
being returned (p.then, and then just returning p)
* Get rid of $.when stubbing in favor of waiting for the promise returned from
the action
* Get rid of hacky setTimeout(..., 0) to run assertions after the promises
* integration.test.js
* Get rid of wait(0) calls to hack around asynchronous actions
* Use the action returned promises instead of the waitPromises/Deferreds
* Remove unused "el" parameter being passed to this.abandon in several tests
* Remove unnecessary test helper this.abandonPreview (it was the same as
this.abandon)
* Clarify a bit the last and more complex test with some comments and variable
name changes
* Get rid of that=this in favor of arrow functions
* container.test.js
* Get rid of that=this in favor of arrow functions
* previewBehavior.test.js
* Get rid of that=this in favor of arrow functions
* Get rid of $.each in favor of .forEach
Bug: T170807
Change-Id: I06fafd92a1712f143018e2ddff24fadf1a6882b3
Returning promises from the `linkDwell` and `abandon` thunks and
removing some of the `wait` stubs in the unit test for these actions.
Also converting a fetch callback from a `.fail` to a Promise A+
compatible `.catch`.
Bug: T170807
Change-Id: I4bbf2863db090e222ba926d3bc36a99da4bdb601
- Removing the javascript positioning of the settings dialog.
- Placing the settings dialog inside the settings overlay.
- Using flexbox to center the settings dialog.
Bug: T157072
Change-Id: If8d929fe019a04ed5f96aa593779841a52f58eff
In the mediawiki gateway fetch uses mw.Api which when calling ajax
returns a promise (not a deferred).
Thus .promise() here is unnecessary and happens to work because of
jQuery promises but it is not a standard method on JS promises so it
shouldn't be used on promises, only on deferreds.
Change-Id: Iec609b90bffad8b99b3908897dfb72d7c4ed5481
Functional changes
- Show the default / error preview for all extract request failures
except those due to network circumstances (such as CORS) or no
connectivity (offline). Previously, the error preview was displayed
only for missing pages.
- FETCH_COMPLETE was previously only dispatched after FETCH_END. Now
it's also dispatched after FETCH_FAILED. The additional "fetch
complete" is not expected to impact logging. The states of success
are: START, END, COMPLETE. The new failure states are consistent with
success: START, FAILED, COMPLETE.
Testing
Errors may be stimulated in a number of ways including:
- Timeout: add a timeout field to RESTBaseGateway /
MediaWikiGateway.fetch().
http://api.jquery.com/jquery.ajax/
- Bad request: change MediaWikiGateway.fetch's action field to
`Math.random() > 0.5 ? 'query' : 'fail'` and RESTBaseGateway.fetch's
url field to
`RESTBASE_ENDPOINT + ( Math.random() > 0.5 ? encodeURIComponent( title ) : '%%%' )`.
- Desired Gateway can be configured in Gateway#createGateway().
- Note: T184534 describes a circumstance where cached previews may not
appear when offline. Disable browser caching to avoid confusion.
Bug: T183151
Bug: T184534
Change-Id: I7332284da0e0fb1ecd234a6f1e146ebd9ad8d81f
Functional changes:
- Require page URL when constructing a PreviewModel null object. These
models have valid titles and are used to display a preview when an
extract is unobtainable. When presented with an empty URL, their
linkage incorrectly pointed to the browser's current URL. Additional
tests were added to verify the fix.
- Check missing title in addition to falsy response in RESTBase gateway
and update the test assertion to check title. It isn't clear if this
can happen in the wild.
- Forbid state mutation in the conclusion of
MediaWikiGateway.getPageSummary() with a call to Deferred.promise().
This is consistent with the rest of repo including RESTBaseGateway.
http://api.jquery.com/deferred.promise/
Nonfunctional changes:
- Collapse two RESTBase gateway 404 tests into one as the scenarios and
expectations were very similar.
- Add failure HTTP status to 'MediaWiki API gateway handles API failure'
test stub HTTP response for consistency with other cases.
- Add nullity expectations to JSDocs touched and fix a couple typos
throughout.
- Make the gateway tests a little more consistent by collapsing Deferred
variable usage where appropriate.
This change is necessary to the completion of T183151 which uses the
PreviewModel null objects for additional error cases.
Bug: T183151
Change-Id: Ib77627fb9c80d8e806208bbafcfc615b130e3278
Event timestamp (as reported by `window.performance.now()`) is also sent
along with every action.
Bug: T180036
Change-Id: Ie3a648298005d51b8b4fbaa6a53e78caf50fa2d3
When bundled by ResourceLoader this can interfere with debugging
of other concatenated files.
The nomin instruction introduced in 7bd29bb058
was meant to avoid RL minifying an already
uglified bundle, but that shouldn't matter here.
Bug: T177344
Change-Id: I90829668544e7c4ff7ddfdbb90d91b88a27a69f4
.catch is only available with jQuery 3, which is only now starting to
roll out (see https://phabricator.wikimedia.org/T124742)
This patch rolls back the usage of .catch introduced in
https://gerrit.wikimedia.org/r/#/c/373327/ to use .fail, but only the
source part, given that patch introduced unit tests for this behavior
Bug: T174724
Change-Id: I6e1c342d812b35846061266bc59e493e87423fd8
We cannot serve .map files from production servers. This makes
Popups extension difficult to debug. As a simplest solution we
decided to store map files as .json files so we can easily access
js maps files.
Changes:
- changed webpack config to store map files under .json extension
Bug: T173491
Change-Id: Iaa55f75a8c5f3e8f1f169b3ac33241cc54f0413f
Number.isNaN is a new function introduced in ECMAScript 6.
MediaWiki only requires ECMAScript 5 supports from browsers.
Notably, Opera 12 does not have Number.isNaN. Instead, use
the global isNaN function (which behaves the same except for
non-numeric inputs).
Change-Id: If436cd26b21ce0336dfbc37144f6226e7b948e5e
Instead of using the non-standard old Promise implementation by relying
on .fail, migrate it to .catch.
In this specific case, where we were chaining promises with $.when, the
semantics from going from fail to catch actually change. .fail keeps the
promise in a rejected state, while .catch will change it to resolved
unless another error is thrown.
As such, when changing it to .catch, the catched error will be re-thrown
to keep the promise in a rejected state, so that $.when.then is not
executed.
Additional changes:
* Make actions.js#fetch return its promise for ease of testing.
* Test FETCH_FAILED, which was fully untested.
Bug: T173819
Change-Id: Ibd380b714586979c6e60b4c969d17f36a0796b52
Introduce PopupsAnonsExperimentalGroupSize config variable. This defines
a population size who will be subject to experimentation. If the group
size is undefined or 0 (default) and PopupsBetaFeature is false
(default value) Popups will be enabled for everyone. If it is any other
value, half that group will see page previews.
Drop the config variable PopupsSchemaSamplingRate - we will now only
EventLog when an experiment is occuring. This means we can simplify the
MWEventLogger class as shouldLog will always be truthy. Given server
side eventlogging is only used for preference changes
traffic should be low and not need sampling.
Introduce getUserBucket which determines whether a user is in a bucket
on, off or control based on the value of
PopupsAnonsExperimentalGroupSize. Add tests showing how these
buckets are calculated.
Caution:
A kill switch wgPopupsEventLogging is provided for safety.
It defaults to false. Before merging, please check if any config changes
are necessary.
Bug: T171853
Change-Id: If2a0c5fceae78262c44cb522af38a925cc5919d3
There are some cases when the preview count stored in local storage
evaluates to NaN. When this happens we should override the value
to zero, store it in localStorage, and return it.
Bug: T168371
Change-Id: Ic44b7c7b5b716f6a0859f33278d56d2d95bbfb3e
We haven't seen the PP EventLogging instrumentation produce duplicate events
for weeks.
Bug: T172106
Change-Id: I6f3d7c0cdbf23161f63259e4d20d8a710376468b
Under some unknown circumstances getPreviewCountBucket() is called
with a value that is not a -1 or a natural number. When that happens
function returns 'undefined bucket' which causes eventLogging to
fail. I wasn't able to reproduce the issue, it might be specific
to browser/os. The safest way is to return 'unknown' for any other
case.
Bug: T168371
Change-Id: I374bb629762a86ac06a18e775d3c1a14682c9f55
Instead of registering global variables in a function, make it pure
return the external interface and set it to mw.popups in the
src/index.js entry point.
Explicitly comment on index.js what is being set and why.
Bug: T171287
Change-Id: I94d467bfa7fa6e56033dd254518ad50b5dde5bfc
Changes:
- introduced js module defining mw.popups object
- introduced isEnabled() method which checks the redux store to retrieve
isEnabled status
Bug: T171287
Change-Id: I523369831e2aa8a915ed1cb001b35d13b770f9da
Why: Because they are the approved standard by TC39 and Ecma for
JavaScript modules.
Changes:
* Wrap mw-node-qunit in run.js to register babel to transpile modules
for node v6
* Change all sources in src/ to use ES modules
* Change constants.js to be able to run without
jQuery.bracketedDevicePixelRatio given ES modules are hoisted to
the top by spec so we can't patch globals before importing it
* Change all tests in tests/node-qunit/ to use ES modules
* Drop usage of mock-require given ES modules are easy to stub with
sinon
Additional changes:
* Rename tests/node-qunit/renderer.js to renderer.test.js to follow
the convention of all the other files
* Make npm run test:node run only .test.js test files so that it
doesn't run the stubs.js or run.js file.
Bug: T171951
Change-Id: I17a0b76041d5e2fd18e2d54950d9d7c0db99a941
Previously, if the browser didn't support the Beacon API, then
instrumentation/eventLogging#isEnabled would bucket the user with a
sampling rate of 0, which is equivalent to returning false. This change
simply does the latter.
Additional changes:
* Update the documented module names of the instrumentation/eventLogging
and statsv modules.
Bug: T168847
Change-Id: I7ae5c10da42ca614b5b1a6619f9555e5665344cf
We had instrumentation for over 4 weeks and duplicate events rate
was very low. We want to keep stats so we check the duplicate events
rate but there is no need to filter those.
Bug: T167365
Change-Id: I72585beb21e9db589e45eeace657ef25f432abc9
Changes:
- introduced new event 'disabled', sent from settings popup
- added unit tests for 'disabled' event handling
Bug: T167365
Change-Id: I048b38122b8843199c86fd1ed9ec2ff21767e114
In order to debug the EventLogging instrumentation in production
environments, we want to be able to bucket ourselves at will.
When the debug flag (?debug=true) is passed send all events
for given page view.
Bug: T168847
Change-Id: Id1b13b0ecaa791b4f26be4d1151bdbbe5270b64d
Changes:
- when event doesn't have linkInteractionToken do not check for
duplicated tokens
- hygiene, move event duplication logic into separate functions
for better readability
Bug: T168449
Change-Id: I3ae197567ec9f67e104af109d4f1a1c1a6769d32
Following on from I4f653bba, since the schema and statsvInstrumentation
modules are similar, let's group/rename them:
schema -> instrumentation/eventLogging
statsvInstrumentation -> instrumentation/statsv
Change-Id: Ic59e0da7d4917f6733fd090f15d3c269af863f05
Currently, the mw.eventLog.Schema class samples per pageview. However,
we expect that if a user is bucketed for a session, then all
EventLogging events logged during that session are in the sample.
Moreover, loading the class in the way that we did - asynchronously,
using mw.loader#using - introduced an issue where the eventLogging
change listener would subscribe in the next tick of the JavaScript VM's
event loop and miss the "pageLoaded" event being queued (see T167273).
Changes:
* Make the schema module follow the form of the statsvInstrumentation
module, i.e. make it expose the #isEnabled method, and add the
associated getEventLoggingTracker function.
* Update the eventLogging change listener accept the tracker returned by
getEventLoggingTracker.
* Update/fix related JSDoc documentation.
Bug: T167236
Bug: T167273
Change-Id: I4f653bbaf1bbc2c2f70327e338080e17cd3443d4
preview/model is just a module/namespace object, not a builder class or
similar.
This patch changes a couple of imports to reference some of the exposed
functions of the preview/model where required.
In a shiny future, this pattern would be:
const { createModel, createNullModel } =
require( '../preview/model' )
Bug: T165018
Change-Id: If6ad4611538ca4f24e2443c0c3ed433275e995a6
gateway/*/rest were copies of gateway/restProvider just passing
a different provider. Docs were the same, they were untested, and
looking at them they seemed like unnecessary abstraction.
This patch removes the plain vs html structure, and separates gateways
like before, by endpoint.
There is a light utility in gateway/restFormatters.js that adapts the
call from the rest gateway to use formatters.js functions. It needs
testing, that I'll add in the next patch.
The flow for creating a gateway ends up as follows:
1. index.js calls gateway/index#createGateway( mw.config )
2. createGateway chooses based on wgPopupsGateway and invokes
* mediawiki.js#createMediaWikiApiGateway or
* rest.js#createRESTBaseGateway w/ restFormatters.js#parsePlainTextResponse or
* rest.js#createRESTBaseGateway w/ restFormatters.js#parseHTMLResponse
Changes:
* Removed src/gateway/{plain,html}/rest.js
* Extracted formatter functions to src/gateway/restFormatters.js
* src/gateway/plain/mediawiki.js -> src/gateway/mediawiki.js
* tests/node-qunit/gateway/plain/mediawiki.test.js ->
tests/node-qunit/gateway/mediawiki.test.js
* gateway/restProvider{,.test}.js -> gateway/rest{,.test}.js
* Change gateway/index.js#createGateway to properly call the rest
gateways with the rest formatters
Bug: T165018
Change-Id: Ia75695dfc192aad5bc581a68882514bad6c29646
And add tests, given it is growing in complexity.
Additional changes:
* Interface ext.popups.Gateway -> Gateway in docs
Bug: T165018
Change-Id: I8a12333ad9d14d6a7fbde11afc42f607881e8ea3
... from the statsvInstrumentation module so that the bucketing logic
can be shared with other instrumentation modules.
Change-Id: I5732fa539a3911939fa85fa88c102fa8dcfa5613
Refactor existing Restbase gateway and extract shared logic into
shared Restbase provider. Also introduced new createNullModel()
which defines an empty preview model.
Additionally improve naming in new gateways/formatter so function
names are more explicity.
* Htmlize() became formatPlainTextExtract() as it should be used
only with plain text extracts
* removeEllipsis() became removeTrailingEllipsis() as it removes
only trailing ellipsis.
* src/gateway/index.js defines gateways by configuration name stored
in extension.json
Bug: T165018
Change-Id: Ibe54dddfc1080e94814d1562d41e85cb6b43bfc1
Depends-On: I4f42c61b155a37c5dd42bc40034583865abd5d7a
Follows-up 79f3b318d0.
Number#toString supports up to Base 32.
Same collision behaviour but with a shorter string.
Typical length with Base 32: 7 (max: 11)
Typical length with Base 16: 9 (max: 14)
Change-Id: I91e91341cbecdec24549ace6a6300550f5b449ee
