This was done while working on T277639 where we introduced
multiple "enabled" flags for individual popup types. This
change listener is one of very few places that work with
this flag. This patch is meant to make this code more robust
and easier to change.
A few unrelated but trivial changes are included that make
code shorter and hopefully easier to read.
Also fixes a bug with tooltips overlapping previews.
Bug: T287119
Change-Id: I7fb0a8d4bb9f5e78fe62cfca524cc157ea89a233
The requirement for landscape images is to be at least 320px
wide. The requirement for portrait images is more relaxed,
only 250px high. Images that fall between these two
requirements currently don't show a thumbnail, even if they
could.
This change affects a very specific group of images:
* Square images from 250 x 250 to 319 x 319.
* Landscape images from 251 x 250 to 319 x 250.
* Landscape images from 319 x 250 to 319 x 318.
The most extreme ratio is 319 x 250. This will be cut to
203 x 250. I.e. the absolute extreme are 58px missing left
and right, but never more.
Requested at https://www.mediawiki.org/wiki/Topic:Vwl97pm6as9fuf6k
Additional stories for testing more extreme small images:
* Small Tall - 300x1000px
* Small Short - 300x200px
Update tests accordingly.
Bug: T268999
Change-Id: I811f1c0e7e9b0c30280b36a61cc7831a5b9e58c8
Turns out this was only in place because the test was
(intentionally) incomplete. But it's dead code in
production. Let's get rid of it.
Change-Id: Ieeb145b6972dceb7eeda3a167d907b680d5c3ce4
For example: We know the HTML element we are dealing with is
always an <a> element.
I believe the small changes in this patch are all obvious and
non-controversial. Please let me know if you disagree.
Change-Id: I9fe15845affffdd0f5f0fd6ef7d6b607cb567ac7
This is not really an error. It does not really have
consequences for the user, except:
* It might waste bandwidth because the module is loaded, but
unused.
* It might waste a tiny bit of CPU time.
However, this can only happen for registered users, and only
with very specific combinations of settings (notably: a
conflicting gadget must be activated).
The reason it's marked as an error is that previously we could
give more guarantees about this. This changed recently. We will
check if the log message is still helpful and either remove it,
or restore the previous guarantees.
Bug: T271206
Change-Id: I218726c9c4879a405acef68710e79c6ac8d070fe
Open questions:
* It is possible to make the patch smaller in case this makes
it easier to backport it. Is this worth it?
* This code is not covered by any test. I think it's worth
writing tests. Most of this code will stay, even after beta.
Bug: T281352
Change-Id: I5f30054f1664643b427909f7fa189b4ea5e11879
Use mw.track instead of dedicated tracker for VirtualPageViews.
This way we can migrate it to the new Event Platform client.
The new client does not observe DNT, which was the reason this
instrument was moved to a dedicated tracker on the first place.
Bug: T279382
Change-Id: I8bb515eab337ffed686ba7522bc6153cfdd8ca8d
This does not fully solve the ticket, as these are not the
actual OOUI styles. But it's already much better than the
unstyled checkboxes before.
Bug: T281227
Change-Id: I9a5023482774c09aa73845ca6dfd1c4926f088e1
This is the smallest possible patch for a backport.
While it seems there is zero technical reason to limit user
option keys to lowercase with dashes, it's best-practice.
Same as message keys.
Bug: T281235
Change-Id: Ia4a45cf4459543c81b23b757ae9c2cfaf9676894
We changed the handling of the popup settings. They now contain popup types (pages and references).
To not get confused with the old setting options (simple, advanced and off),
we would like to rename the local for the simple setting to page.
It should already contain the correct string.
Bug: T277639
Change-Id: I8847b890e9e31602277a92d82a188fcdd3eea855
* Change more places to not hard-code the popup types, but use
loops and such.
* Change many `function ()` headers to use the more streamlined
ES6 sytnax.
Bug: T277639
Bug: T277640
Change-Id: Ifece87d51012e0e069286453b27f5c9ae273710e
We added reference preview as a checkbox the the
anonymous user settings. To handle both popup types
(pages and references), we changed the usage of
preview.enabled. We pass on all types as a map
inside preview.enabled. The footer link to edit the
settings will appear for anonymous users if at least
one type is disabled.
Bug: T277639
Change-Id: I860a1b35ac7749d8d0884575f6acb7186ad8e4d0
We still have 2 different mechanisms in place, maybe even 3:
* We simplify the CSS selector when we know a popup type is
disabled, and it's impossible an anonymous user can enable it
at run-time.
* We create that "initiallyEnabled" map that allows anonymous
users to toggle the individual popup types at run-time.
* This map is also used to check if the footer link should be
shown.
* There is also a wgPopupsReferencePreviews global that acts as
a "kill switch". However, this is not a pure feature flag,
but incorporates the user setting for registered users. This
is currently partly redundant (checking
`mw.user.options.get( 'popupsreferencepreviews' )` does the
same) and can be removed later when the feature flag is not
needed any more.
The footer link currently acts odd because anonymous users are
unable to enable ReferencePreviews, but get the footer link.
This patch introduces a 3-state model:
* `true` acts as before.
* `false` means a popup type is disabled, but anonymous users
can enable it (i.e. this is the opt-out behavior for anonymous
users).
* `null` means a popup type is not available at run-time, for
nobody. Anonymous users can't do anything about this.
Registered users must leave the page and change a setting.
Bug: T277640
Change-Id: Id8d1396c09cf0f706034a66f9cd3c880a8b33df8
An "advanced" option was first introduced in 2014 via patch I374805e
(originally named "monitor-or-edit", renamed via patch I7b4f6d2).
The isNavPopupsEnabled() function was added in 2016 via patch
Ic660f48.
The code that disables the extension entirely the moment the NavPopups
gadget is enabled was added in 2017 via patch Ia474b1b (T151058) and
patch Ia837816 (T160081).
As of now, the "advanced" option can only be seen in an extreme edge
case:
* Only for anonymous users.
* Only if NavPopups is enabled by default for anonymous users.
* Only if the $wgPopupsConflictingNavPopupsGadgetName setting is
misconfigured.
* … or if NavPopups is not a gadget in the first place, but e.g.
loaded via Common.js.
In this situation the settings dialog opens with all *3* options. This
is broken for several reasons:
* The "simple" option enables the extension, but doesn't disable
NavPopups. Both trigger, resulting in both popups being displayed
the same time.
* Since "simple" is the default, this bogus behavior is the default
for anonymous users.
* The "off" option doesn't stick. Every time the settings dialog opens
"advanced" is checked instead.
* "Off" can't work anyway. There is no code to disable the gadget.
* Only the "advanced" option "works", but more by accident.
It's unclear how to fix this:
* There is no code that does anything with the "advanced" option. It's
not even stored. The behavior of the option is identical to "off".
* The code appears as if "advanced" was meant to be shown instead of
"off". I.e. anonymous users can only choose one of the popups, but
not disable both. But there is no code to hide the "off" option.
* The bug when both popups are displayed was fixed in 2017 via an
entirely different mechanism. Re-introducing "advanced" does not
only mean duplication, it's unclear how the 2 mechanisms are meant
to work together.
It really, really feels like this was just forgotten.
Bug: T278949
Change-Id: Iab21f3a649a5b2f19ebb0d0dbb45ce1450c65678
… as well as in one place in production code. The motivation
for this change is to make the code easier and faster to read.
There is a little bit of duplication in the test setup now.
But I would like to argue this is a good thing. The values are
rather trivial. The difference (or absense of a difference) is
much easier to see now.
Change-Id: I9aa95b59f0c45ea7c9257970e2fcdba3a000d234
This patch does nothing but rename a pair of variables:
"prevState/state" becomes "oldState/newState". Reasoning:
1. The abbreviated "prev" is confusing, especially because we
are in a codebase that is all about "previews".
2. We are in a context that is all about a state **change**.
Change listeners get notified about the change from one state
to another. While it would be possible to stick to the already
mentioned "previous/current" terminology, I find the word
"current" confusing. What is "current" in this context? Did
the state already change? Am I notified about a change that is
**going** to happen or already happened? Is this even relevant?
I don't think it is. Therefor "old/new".
Another possibility is "previous/next".
Change-Id: Id886e1a095967fe86fb9021f59e335c62da8994e
The nextState() function was not able to understand updates that
are deeper than a single level. Example:
nextState( state, { pagePreviews: { enabled: true } } )
Before, this would replace whatever was in the "pagePreviews"
property with { enabled: true }, but not merge it. In some places
a single level of recursion was done manually because of this.
This can be removed now.
This is done in preparation for splitting the "enabled" flag into
separate ones for each popup type.
Bug: T277639
Change-Id: I35911c18018ba7cd1633a4c882b978656c3fee36
Note how getIsEnabled() is documented: "if the user hasn't
previously enabled or disabled Page Previews […] then they
are treated as if they have enabled them."
In other words: The idea that the default should be true is
encoded twice in this code. This is just not necessary. We can
remove one without loosing anything.
Motivtion: Simplifying the code and reducing the package size.
Since the code fundamentally depends on this default value
anyway, we can clear the users localStorage when they decide
to go back to the default – instead of storing a "1" which
does the same as the default.
Change-Id: I2814a1e9269979918609162a508eeee6944d9e52
The main motivation here is to dramatically reduce the number
of places that use the same property name "enabled" for values
on different objects (e.g. "state", "actions", and "updates"
are all different things) with slightly different meanings. I
tried hard to come up with names that reflect better what each
meaning is.
Bug: T277639
Change-Id: Ie766259793f716262e3d4622ca55156d11f4842c
… instead of only 2 hard-coded nesting levels, as it was before.
This is done in preparation for splitting the "enabled" flag into
separate ones for each popup type. This patch here doesn't change
any behavior or internal representation of the states.
Bug: T277639
Change-Id: Icad669d1c9675ad6de22f478e254debe5d1936d7
Add message, description, extension for title. Update createPagePreview, renderPagePreview methods to add title attribute to settings gear icon. Add test for title attribute. Increase maxSize, maxAssetSize, maxEntrypointSize. Add compiled js files.
Bug: T274887
Change-Id: Ibb29deb3418569d8283b954b4b22074423e78bda
To reduce size of code added to the <head> and increase performance.
The increased bundlesize is still less than the size spared bytes in
ResourceLoaderGetConfigVars. - But nevertheless the main gain is loading
less in the <head> anyways.
To avoid further complexity in the code, the bitmask is converted to
the according config setting early on instead of adding checks on the
bitmask all over the place.
Tests will be added in follow ups.
Bug: T276716
Change-Id: Ib4f82bed58295b25f0a41cb37e36244e45f16317
This fixes a small regression introduced in Ia61f1b7. When
reference previews are still enabled as a beta feature the
unnecessary footer is hidden, therefore, we need to account
for this when calculating the dialog's height.
Bug: T234205
Change-Id: I1c142019031ab954550e237ddb23824da1aee8db
Update copy and remove unnecessary reference preview preference
in favor of using the default preference. It seems there is no
stable method to link to the subsections on the preference page
for gadgets. So in all cases does the link just point to the
gadgets pref page.
These changes should only be visible when reference previews
are no longer marked as a beta feature.
Bug: T265709
Change-Id: I7b8ab91331092ada04b230315373548673b9272c
* When there are multiple <cite> elements, the first that contains a
known class is used. We assume the earlier one must be the relevant
one.
* When there are multiple known classes in e.g. <cite class="web news">,
the last one is used. This follows how CSS works.
* There is extra validation if the corresponding message exists, just
to be sure. This is cheap.
Bug: T274979
Change-Id: Iee3481ea16af96b40faf978e254718e5a48917f3
I added the common styling for the setting icon to the popup.less
and removed the now empty pagePreview.less.
Bug: T234205
Change-Id: I2a82831bc71a4208c4b66c18e2a4613127c43e1f
Request a larger thumbnail to ensure
the thumbnail is served scaled rather
than scaled by the browser.
Bug: T272169
Change-Id: Ibf80f24c949e14c8289b8b0a4e7369dd10ead449
It turns out the TextExtracts extension is build in a way so
that the parameter plaintext=1 alone is not enough. It does
not really mean "please return plain text" but "please don't
return HTML". It can still return one of three formats:
* Wikitext.
* An intermediate parser format where headlines are not
`== this ==` but `��2��this`.
* Actual flat plain text.
The default is wikitext. That's why we see `== wikitext
syntax ==` in certain edge-case situations. Forcing it to
"plain" fixes this.
Bug: T271439
Change-Id: I3035fb3df99680af8bbd10c4513aed730013c344
This reduces a lot of churn in creating the SVG
element and related helpers.
When IE11 is dropped, the SVG code-path can also be dropped.
Bug: T269336
Change-Id: I7f91192dedc2a78f1c7c84179cff1687593177c0
This reverts commit 6bc2077ed5.
The change causes issues with various popular gadgets on Wikimedia
wikis. The 'title' attributes have been the easiest way to determine
the target pages of links, and many gadgets have come to rely on that.
Bug: T269297
Bug: T269873
Change-Id: I49d315a13c327a1c5af51d3de887c0c17642e9fe
When creating a popup, clone the previously created DOM element
and populate the attributes and content.
Ideally this would be done with a template element, but since IE11
is still supported this is not possible.
Change-Id: I347615cf1f613d97d767d60627b13b6b3ff9c762
Bug: T269338
Reduce layout/style thrashing by measuring all required geometries
at event handler, not waiting for delays/redux/style changes.
Use CSS bottom instead of top, to avoid having to measure the popup
before positioning it, if it's placed above the link ("flippedY").
Disable some test cases that relied on implementation detail of using
"top" CSS.
Change-Id: Id0cbf506009b824d0fb6af4d6fe220e2f69aaaad
