.catch is only available with jQuery 3, which is only now starting to
roll out (see https://phabricator.wikimedia.org/T124742)
This patch rolls back the usage of .catch introduced in
https://gerrit.wikimedia.org/r/#/c/373327/ to use .fail, but only the
source part, given that patch introduced unit tests for this behavior
Bug: T174724
Change-Id: I6e1c342d812b35846061266bc59e493e87423fd8
Instead of using the non-standard old Promise implementation by relying
on .fail, migrate it to .catch.
In this specific case, where we were chaining promises with $.when, the
semantics from going from fail to catch actually change. .fail keeps the
promise in a rejected state, while .catch will change it to resolved
unless another error is thrown.
As such, when changing it to .catch, the catched error will be re-thrown
to keep the promise in a rejected state, so that $.when.then is not
executed.
Additional changes:
* Make actions.js#fetch return its promise for ease of testing.
* Test FETCH_FAILED, which was fully untested.
Bug: T173819
Change-Id: Ibd380b714586979c6e60b4c969d17f36a0796b52
Why: Because they are the approved standard by TC39 and Ecma for
JavaScript modules.
Changes:
* Wrap mw-node-qunit in run.js to register babel to transpile modules
for node v6
* Change all sources in src/ to use ES modules
* Change constants.js to be able to run without
jQuery.bracketedDevicePixelRatio given ES modules are hoisted to
the top by spec so we can't patch globals before importing it
* Change all tests in tests/node-qunit/ to use ES modules
* Drop usage of mock-require given ES modules are easy to stub with
sinon
Additional changes:
* Rename tests/node-qunit/renderer.js to renderer.test.js to follow
the convention of all the other files
* Make npm run test:node run only .test.js test files so that it
doesn't run the stubs.js or run.js file.
Bug: T171951
Change-Id: I17a0b76041d5e2fd18e2d54950d9d7c0db99a941
And add tests, given it is growing in complexity.
Additional changes:
* Interface ext.popups.Gateway -> Gateway in docs
Bug: T165018
Change-Id: I8a12333ad9d14d6a7fbde11afc42f607881e8ea3
This reduces the number of 301 Redirect responses when fetching previews
from RESTBase.
Bug: T167633
Change-Id: I830947ab79e72dcc023193412c8d5bcee986e23f
...instead of 1 event per link
Supporting changes:
* Delegate events on the container when booting up
* Check eligibility of title on event triggered
* Pass the title from the event handlers into the actions instead of
storing it in the dom
* Add title.fromElement as sugar over isvalid(gettitle())
* Not tested as it is sugar over the other 2 functions
* Fix action tests and integration tests
processLinks to be removed next
Bug: T165572
Change-Id: I4d9837706dc77ec64121ac94410c0d2da83692e4
This ensures all files belong to a module.
When generating documentation no globals should be present
Bug: T158236
Change-Id: I134f38620fe46db11ba94dbede739f4336e0482c
Given that interactions end up with an event logged, there shouldn't be
a reason to keep an interaction active after it's corresponding final
event has been logged. See Tbayer's state graph.
This patch removes the current interaction if an event with that token
is logged, effectively finalizing it and making it impossible for the
token to be reused from the state tree again.
Additional changes:
* Pass the logged event with the action EVENT_LOGGED so that the reducer
can determine if it needs to do anything else.
* Since the interaction is removed, when undefined, guard against
actions that use state.interaction freely. (Only allow BOOT,
LINK_PREVIEW, and EVENT_LOGGED)
Bug: T161769
Bug: T163198
Change-Id: I99fd5716dc17da32929b6e8ae4aa164f9d84c387
This fixes a bug in I8a63d82, where the pageTitleHover and
namespaceIdHover properties of EventLogging events weren't being set.
Bug: T164256
Change-Id: Ie2c2d253f6508b89d48129fd17a902e5ded7cad5
Action changes:
* Include the namespace ID in LINK_DWELL.
Reducer changes:
* Add the createEvent helper, which adds the pageTitleHover and
namespaceIdHover properties in the event.
* Create "dismissed", "dwelledButAbandoned", and "opened" events using
the createEvent helper.
Additional changes:
* Store the target page's associated mw.Title using jQuery.
* Update the eventLogging reducer's test cases so that all LINK_DWELL
representations include title and namespaceID attributes.
* Create the createStubTitle factory function, which returns a minimal
usable mw.Title stub, and use it in the actions and integration test
cases.
Bug: T164256
Change-Id: I8a63d82a65324680dff9176020a8ea97695428c4
If the user CmdOrCtrl+Clicks on a link, then the link will remain
focussed. If a preview is shown, clicks another element on the page, and
then there'll be no token to include in ABANDON_* with.
Bug: T162924
Change-Id: Ie2237aa55ea9a11070498b66c73b8bf1898d8d44
Mirroring all other actions that are dispatched after some delay, add
the token to the PREVIEW_SHOW action.
Supporting changes:
* Pass the token to ext.popups.Preview#show so that it can be passed to
actions#previewShow.
Bug: T159490
Change-Id: I128fd56e770ed09d5d0dc55db73d11b013049c79
Require that two promises are resolved (or one is rejected) before the
FETCH_COMPLETE action is dispatched. The first promise represents the
gateway request and the second represents an arbitrarily long delay. If
the first resolves before the second, then there'll be a delay until the
second resolves; whereas if the first rejects, then there's no delay.
Change-Id: I496fe317337745c593594efff26688c46d661bf3
Mixing in the delay was introduced in If3f1a06f so that the total RTT
for an API request could be calculated. Now that the FETCH_END action is
dispatched when the gateway request ends and not when the preview model
is resolved, this additional information (state) is redundant.
Change-Id: I7e6ffe0945ffedd9425525fa7da855e729d50b77
Ideally, the preview model is resolved after 500 ms, regardless of
whether the internal gateway takes 100 or 300 ms. Given this, there's an
important distinction to be made between the "fetch" ending and it
completing and their associated actions.
Changes:
* Dispatch the FETCH_COMPLETE action when the preview model is resolved.
* Update the reducers accordingly.
Change-Id: I62c9cb0430284b76338ea80bd170cac5af4be9d0
Step 1 of T161284. Given that the median API response time (as measured
by the client) is ~115 ms [0] and the API response is artificially
delayed so that the preview starts fading in at 500 ms, we can increase
the API request delay to 150 ms without affecting the current UX while
decreasing the number of incidental HTTP requests triggered by the user
glancing their mouse over a link to another page.
[0] https://grafana.wikimedia.org/dashboard/db/reading-web-page-previews
Bug: T161284
Change-Id: I4c4a766467cdb4cd47c4231c1106c35bab67855e
For logging to work:
1. $wgWMEStatsdBaseUri needs to point to a valid statsv endpoint,
e.g. 'https://en.wikipedia.org/beacon/statsv'.
2. $wgPopupsStatsvSamplingRate needs to be set. Note that the codebase
already contains the EventLogging functionality, which is configured
separately. Separately configuring different logging mechanisms
allows us to avoid sampling mistakes that may arise while choosing
one or the other. For example, let's say we want to use EventLogging for
10% of users and statsv for 5%. We'd sample all users into two
buckets: 50/50. And then we'd have to set the sampling rates as
20% and 10% respectively, only because of the bucketing above. To avoid
this kind of complications, separate sampling rates are used for each
logging mechanism. This, of course, may result in situations where a
session is logged via both EventLogging and statsv.
3. The WikimediaEvents extension needs to be installed. The extension
adds the `ext.wikimediaEvents` module to the output page. The
logging functionality is delegated to this module.
Notable changes:
* The FETCH_START and FETCH_END actions are converted to a timed action.
* The experiments stub used in tests has been extracted to the stubs
file.
Logged data is visualized at
https://grafana.wikimedia.org/dashboard/db/reading-web-page-previews
Bug: T157111
Change-Id: If3f1a06f1f623e8e625b6c30a48b7f5aa9de24db
Now that most unit tests are run in node with common.js for loading
sources there is no reason to keep global variables around exposing all
the sources.
Only exception is the only qunit integration test processLinks.test.js
which still consumes mw.popups.processLinks, which is the only global
variable remaining in the codebase.
Changes:
* Remove references to mw.popups in code comments and reference the JS
file instead
* Remove popups.js which exposes all common.js modules as global
variables
* Export mw.popups.processLinks in processLinks.js for testing in
processLinks.test.js
Change-Id: I91066654b9282f73a80eb1ba5018bd091656c61d
Because of the globals mw.popups.wait usage and mocking in both actions
and integration, they need to be migrated in a single step, fixing them
both to require wait.js and mock using mock-require instead of the
global variable.
Additional changes:
* Fix FIXMEs about actions.js using the global mw.popups.wait instead of
the require one.
* Fix the unit tests to use require mocking for wait.js instead of
global variable mocking in both integration and actions tests
* Change tests that use deferreds and promises to be async qunit tests
(Deferreds are asynchronous with jQuery in node, apparently they
weren't in the browser)
* Change integration.test.js to use require on Redux and ReduxThunk
Change-Id: I8e3e87b158bd11c9620e77d0a73e611cf9e82183
The "checkin" part of the Popups schema was superseded by the
ReadingDepth schema, the implementation of which is tracked by T155639.
As well as removing all checkin-related code, update the Popups schema
to the latest version - the version that doesn't have the checkin
property.
Bug: T155639
Depends-On: I762ec3fc91decf3cffa869dbd783faf62f01329a
Change-Id: If764917b6e121e1f9db980a4efa30c0f7a166197
This way, src contains sources, and dist contains distribution files.
Also, add some documentation about the folders in the README and an adr.
Change-Id: Ie0b9f6475b8423b90e927633d883bde3cd5d5e4d
2017-02-14 09:59:59 -08:00
Renamed from build/ext.popups/actions.js (Browse further)
