Adds new notification type and icon for successful mentions.
Complements existing test to consider successful mentions.
Bug: T139623
Change-Id: I7a77b40e8b14c95cadb9023065ee916247feacf9
- Adds global "$wgEchoMentionStatusNotifications"
to activate mention status notifications.
(must be set before extension is loaded)
- Adds notification types and icon for some basic mention
failures.
- Adds failure and stats for anonymous IP.
- Adds check for links to user subpages.
- Adds config var for max mention notifications allowed.
- Bundles notifications.
- Refactors test for the event generation and adds tests
for unknown users, user links with subpages and failures
for too many mentions.
Bug: T136326
Change-Id: I388bdc3714feb9a2865a5ad10dbeabb0a6a09a4f
It was bumped by the bundling changes, but it needs to be
bumped again for the re-sort changes.
Bug: T123018
Change-Id: Ic92af310355279122e857f698e53134cca293efe
To allow individual notifications to be
marked as read/unread or moderated,
bundles are created by grouping associated
notifications when they are fetched for display
instead of when they are created.
From a product perspective, this change doesn't
introduce moderation or expandable bundles but
it counts each individual notifications.
For instance, the bundled notification
"3 new topics on PageA" now counts as 3
notifications.
Bug: T93673
Bug: T120153
Change-Id: Iacd098573efd92bb1e3fcd7da4cd40cea9522f15
Adds $wgEchoSectionTransition and $wgEchoBundleTransition.
If either of these settings is enabled, we will disbelieve
the alert/message counts in the euw table and obtain them
using server-side cross-wiki API queries instead.
This affects both ApiEchoNotifications (for generating the cross-wiki
summary entry) and the count and timestamp computation in NotifUser.
In bundle transition mode, we trust that notifications are classified
correctly between alerts and messages, but we don't trust the
counts in the table. In section transition mode, we trust that
the sum of the alert and message counts is the correct count,
but we don't trust the alert and message counts individually.
If both modes are enabled, we mistrust anything that's mistrusted
by either mode and only trust what's trusted by both modes.
In any event, we do trust that only the wikis with rows in the
euw table have unread notifications.
Bug: T132954
Change-Id: Ibcc8ac102dac3cf06916d67427b42457fdb93db6
The query shouldn't be too expensive: it'll use an index to narrow
down the resultset for 1 user. After that, it'll be sorted based on
a grouped by value, but that should fit in memory: it'll never be
on more than 2000 entries, which is the max amount of notifications
per user.
Change-Id: I271ea7f7a6e010284739bfce02c4ec8a077148fc
There was quite a small link under the main title in Special:Notifications
which pointed to a related help page. Now the OutputPage::addHelpLink()
method is used which moves this link to the upper right corner and allows
configuring this on-wiki (instead of LocalSettings.php or so).
Bug: T101057
Change-Id: Ib4aecee8006b8d71bb3cd86f1d4ebdfee9080870
* Replace AddNewAccount hook with LocalUserCreated
* When AuthManager is enabled, use it instead of AuthPlugin when
checking if the email address can be changed.
Bug: T110285
Change-Id: I7e28c574ae6e3b5443e39b38e12a9bded31c283b
This is needed because global tables and cache keys will attempt to be used
even for users who don't have the preference enabled.
Bug: T135266
Change-Id: I6208a12d46c8cd0275a232663cd50ac2bd2fed1c
When updating notification counts, we already called User::invalidateCache(),
which bumps the local user's touched timestamp, which is taken into
account by OutputPage when computing the last-modified timestamp of the response.
However, this only works for one wiki, while the changed global count
needs to be displayed on every wiki. To accomplish this, track the
timestamp of the last update in NotifUser, and hook it into
OutputPageCheckLastModified.
Change-Id: I22c88a017f18a28179906049ee423c2d7e81c939
We were using the local user ID instead, which is not the
same on every wiki, which caused strange cache staleness
and pollution behavior.
Run sets through a wrapper function (gets were already wrapped)
so we can update the instance cache and deal with uncomputable
cache keys in one place. A global cache key may be uncomputable
if we fail to obtain the user's global user ID (users aren't
supposed to be unattached, but some are).
Also bump the cache version to get rid of polluted cache entries.
Bumping this version number was probably a good idea anyway,
with all the recent changes.
Bug: T134533
Change-Id: I1c4f0c2f2eded480c80f8ec7a49a04feb7c5ecfb
Removing the info popup because we don't have to show
a privacy notice when linking within the wiki.
This adds a database query to every page view for logged-in
users; If78bfc710, once merged, will fix that.
Bug: T117669
Change-Id: I8451db34ae8e94264e4921ecd6df6e4b32c7623a
This provides a simple unlisted special page,
Special:DisplayNotificationsConfiguration, to document how the
notifications are structured and configured. It shows:
* Which types are in each category
* Which notify types (web/email) can be enabled for each category
* Which notify types are mandatory for each category
* Which notify types are enabled by default:
** For existing users
** For new users
Bug: T132127
Change-Id: I25b447a69a7c984941dfd703345d7977c0000bfe
Merge and deploy at the *same time* as:
* BounceHandler - I3c669945080d8e1f67880bd8a31af7f88a70904d
* mediawiki-config - I13817c139967ed9e230cfb0c87c5de66da793c96
Despite claiming to be about categories, $wgEchoDefaultNotificationTypes
was actually configuring both categories and types (which go inside
categories).
For example, 'thank-you-edit' is a type, but 'emailuser' is both
a category and a type (when used as a category, this has special
effects at Special:Preferences).
Since types and categories can and sometimes do have the same names,
this leaves no way to properly and clearly configure them. It also
makes it difficult to document what is going on (as required by
T132127).
Split into three variables:
$wgDefaultNotifyTypeAvailability - Applies unless overriden
$wgNotifyTypeAvailabilityByCategory - By category; this can be and is
displayed at Special:Preferences
$wgNotifyTypeAvailabilityByNotificationType - By type; this cannot
be displayed at Special:Preferences. To avoid confusing the user,
we introduce a restriction (which was previously followed in practice,
AFAICT) that types can only be overridden if the category is not
displayed in preferences.
Otherwise, it can look to the user like a category is on/off, but the
types within might have the opposite state.
Due to this configuration change, this is a breaking change, and needs
coordinated deployments.
This also lays the groundwork for T132127
Also change terminology to consistently use "notify type" for web/email.
It was mixing between that and output format (which unfortunately
sounds like the API format, e.g. 'model').
Bug: T132820
Bug: T132127
Change-Id: I09f39f5fc5f13f3253af9f7819bca81f1601da93
Add a mw.echo.ui.FooterNoticeWidget that includes a link to
a feedback survey, and three config variables:
* $wgEchoShowFooterNotice: Enable this feature per wiki
(Defaults to false)
* $wgEchoFooterNoticeURL: The URL for the survey
(Defaults to '')
* User preference 'echo-dismiss-feedback-alert': determines
whether the user permanently dismissed the feedback alert.
(Defaults to false)
Bug: T128937
Change-Id: I918a70beaba7b173e764519fe4fe0f780b61082d
This involves:
* Making this value no longer admin-configurable.
* Changing getNotificationCountForOutput to return only a single value
Since there is no + in the formatted value anymore, we can actually
use the same value for both.
This is a B/C break, but hopefully worth it to simplify the method
call.
For now, the excess parameter is just marked unused. It could be
removed at some point if the translations are updated.
This must be merged at the same time as:
* Flow - Ibfa56b1af9e8c56b4c5f900e0d487bc09688b2a2
* MobileFrontend - Ibf784b279d56773a227ff261b75f2b26125bbb63 (well, MF
can be merged first)
* translatewiki - I2a4b6938aed49e4101deb6b9351c43656a863490
Also, change 1 to One/one, per Siebrand on the task. This can easily
be dropped/undone if we don't want it.
Also, remove reference to no-longer-existent notification-page-linked-bundle
Bug: T127288
Change-Id: Iabeaae747f99980c0610d552f6b38f89d940b890
Current situation: cross-wiki can be enabled on certain wikis &
disabled on others.
Code used to check if cross-wiki was enabled before fetching the
status of unread messages on foreign wikis. However, it would then
write that result to a shared memcached key.
The cross-wiki check should not happen before data is stored to
cache: what is stored should always be for all wikis. Only when
we fetch it, should we check if cross-wiki is enabled. And if it's
not, we can't use the cross-wiki data - we have to hack around it
ourselves...
Bug: T124372
Change-Id: I3d3d54fc3cbfbf73b51e97acfd8d355dd0cea36d
This code is completely useless:
* for format=flyout, the new EchoFlyoutFormatter.php will be run
* and even that one has already been deprecated as it was replaced
by format=model (flyout html is now built in client)
Change-Id: Iea23abb66397ecc4efb575fe33fdbedc5b4e0f70
Right now, if certain users should be excluded, that would have
to be part of the user-locators already. This is annoying because
it's hard to write "generic" user locators when you want to exclude
just a couple of people in certain cases.
In Flow, for example, we have user-locators for users watching a
board or topic. We don't want to send the notification to people
that have also been mentioned in that post (they'll get a separate
notification). We could build that exception into those
user-locators, but then we couldn't re-use them in other places...
This basically means we couldn't use EchoUserLocator::locateUsersWatchingTitle,
we would have to roll our own that also excludes mentioned users.
Instead, this lets you add 'user-filters' (that functionality
actually exists already, but is not currently exposed), which
lists users to not send the notification to, even though they could
be in a user-locator.
Bug: T125428
Change-Id: Ifa0e2d3283f57624af4c5ec264f9f66223508e83
