-new_html: also strip the "Transclusion limit" comment if present, and
anyway take it into account (as well as a "</div>"), which right now
prevent the PP limit report from being stripped as well.
-new_text: trim extra whitespace on the right, which is created when
stripping the aforementioned comments.
Also simplify the test for getEditVars, make it not blindly copy what
AFComputedVariable does.
Extra: kill a temporary variable.
These changes are partly taken from
I96785c6c5fdf381c21d5f8930ee12e706abb7f3f.
Change-Id: I2b4c84a3d9d0d17ce229088197b75781d5181b4f
Even if the array is DUNDEFINED, we need to check the offset to ensure
that it's valid.
Bug: T237351
Change-Id: Ibfa360c4ae1d80abe14d9fdf66991b76cb5954df
For the new parser, xhgui shows that AbuseFilterParser::getVarValue is
taking up a lot of time; in turn, most of the time spent inside
getVarValue is used to log the use of deprecated variables. Hence, given
that:
- We should keep the new parser performant
- There are tons of deprecated variables out there and they likely
won't be replaced
- Having gazillions of debugLog entries doesn't help
log them only in the cached phase.
Bug: T234427
Change-Id: I2bfc692c829c3cbe889e5076f5205e2c99097087
This is identical to I8a3c31e7385283d95b4712d457784016239a0b3b, except
for the array append case.
Bug: T236870
Change-Id: Iac033ba467232f6ff110d575920e968759ce0e15
This is especially useful for old patches, created before the
introduction of FUNC_ARG_COUNT, where a rebase may break the parser.
Change-Id: Ib142438626a7305f102dc3e4cc9cb07ad33902b8
This will allow people to switch their filters to the new syntax. The
deprecation warning is now more exhaustive, and the info() warning is
kept to ensure that everything proceeds smoothly.
The regex v2 has also been fixed to:
- Consume all the digits/letters on the right (*)
- Have named groups
- Be created dynamically with other constants
(*) The previous version of v2 could complete the match and leave
digits/letters on the right when encountering numbers with the old
syntax, hence dropping support too early. We also cannot use a word
boundary (\b) because that would prevent matching numbers with trailing
dots (e.g. "5.").
Bug: T212730
Change-Id: Ibf6ac571f6b5c09149d69a19c38240ce6b024dff
This bumps the level to WARN, and makes it very clear that people should
fix the affected filters. It also removes the calling method, which was
mostly meant for debugging purposes, and changes the type to 'op_type'
to avoid conflicting with type:mediawiki in logstash.
Bug: T156096
Change-Id: Ie73f1604e8ed82bc2e1be9fc90fa065be37889a3
Always run the keyword/function handler, even if there are DUNDEFINED
arguments, so that the handler can perform further validation on the
input and report any error to the user. However, replace DUNDEFINED with
DNULL before running the handler, to avoid special-casing DUNDEFINED in
every handler. If any argument was a DUNDEFINED, we will return
DUNDEFINED anyway.
Also centralize the keyword handling logic to a new method, like it
happens for functions.
Bug: T234339
Change-Id: I875cb77418a39790e91fe5867c49917bfe406ed4
This emits its own error because:
1- It's clearer to understand
2- It's easier to find where we're dealing with negative offsets, if
we'll ever want to allow that.
Note that trying to use a negative index already results in a hard PHP
error being thrown.
Bug: T237219
Change-Id: Ib11eaaca5e21f740269141c75e62bac48093e8d0
In Ib7427e15f673a575738489476e604c387f449ddd, I thought that $parameters could've only been null if $action wasn't
enabled, but actually, they're null even if the action is just not set.
Which is true for all actions when creating a new filter, and all
non-set actions when editing an existing one.
Hence, revert the part that touched ViewEdit.
Also add a selenium test to ensure that warn parameters are visible.
Bug: T236286
Change-Id: I8150baa077208eb1fc54ebc1d8415a243d0f3bd3
This is some sort of Hello World for selenium. This patch adds the
config files and a couple of very basic tests.
Bug: T214478
Change-Id: I8193b4edb40332bea1d08e24ec020bf36004320d
This is similar to the old parser: when discarding a node, actually
evaluate it if short-circuit is not allowed.
Add a whole lot of tests for all possible exceptions.
Move the logic to extract a message from an AFPUserVisibleException away
from the parser, to keep unit tests working.
Bug: T232498
Change-Id: I31ee4e255c6a87dd693b9bcd582539fdf57acd45
This implements T230982#5475400, and it should speed up the CachingParser by roughly 40%.
Bug: T230982
Change-Id: I803cc58637d50eb90e57decf243f5ca78075d63d
Setting 'apiHookResult' results in a "successful" response; if we want
to report an error, we need to use ApiMessage. We already were doing
this for action=upload. Now our action=edit API responses will be
consistent with MediaWiki and other extensions, and will be able to
take advantage of errorformat=html.
Since this breaks compatibility anyway, also remove some redundant
backwards-compatibility values from the output.
To avoid user interface regressions in VisualEditor, the changes
I3b9c4fef (in VE) and I106dbd3c (in MediaWiki) should be merged first.
Before:
{
"edit": {
"code": "abusefilter-disallowed",
"message": {
"key": "abusefilter-disallowed",
"params": [ ... ]
},
"abusefilter": { ... },
"info": "Hit AbuseFilter: Test filter disallow",
"warning": "This action has been automatically identified ...",
"result": "Failure"
}
}
After:
{
"errors": [
{
"code": "abusefilter-disallowed",
"data": {
"abusefilter": { ... },
},
"module": "edit",
"*": "This action has been automatically identified ..."
}
],
"*": "See http://localhost:3080/w/api.php for API usage. ..."
}
For comparison, a 'readonly' error:
{
"errors": [
{
"code": "readonly",
"data": {
"readonlyreason": "foo bar"
},
"module": "main",
"*": "The wiki is currently in read-only mode."
}
],
"*": "See http://localhost:3080/w/api.php for API usage. ..."
}
Bug: T229539
Depends-On: I106dbd3cbdbf7082b1d1f1c1106ece6b19c22a86
Depends-On: I3b9c4fefc0869ef7999c21cef754434febd852ec
Change-Id: I5424de387cbbcc9c85026b8cfeaf01635eee34a0
This is because there are many filters using this feature. Moreover, it
could make it a little easier to add new arguments, just like dangling
commas in PHP arrays do.
Also re-align the CachingParser code of doLevelFunctions to the one in
the old Parser.
Bug: T153251
Change-Id: Ie4325159f47310788da57415a5e36e62aa4efad0
This will help mitigating problems like T230256 by enforcing that the
requested variables must exist. For now, it will only log bad usages,
thus providing a way to identify affected filters and fix them.
Bug: T230256
Change-Id: I7a61916576e444a56f0e07da7b6e5033346226bd
Using `new LanguageEn()` involved a global, so use a MockObject instead.
Also fix LoggerFactory usage in Tokenizer to use DI instead.
Change-Id: I94d03f9459ab6444e239386eb96a0c2434bfe3dc
We don't need to call it in the constructor, as long as the call in
setUp() is moved to before we start adding groups and checking blocks.
Follows-up Id8412e2b8a4e873fd4821ecc1a3c95710be9a.
Change-Id: I339363499f99295a83004074d6a44574cd622a58
IMHO these can be considered unit tests; they were already fast, but now
they're executed in an instant.
This requires several changes: 1 - delay retrieving messages in
AFPUserVisibleException, to avoid having to deal with i18n whenever we
want to test exceptions; 2 - Use some DI for Parser and Tokenizer.
Equivset-dependend tests are also moved to a new class, thus helping to
fix the AF part of T189560.
Change-Id: If4585bf9bb696857005cf40a0d6985c36ac7e7a8
Some of these are transformed into real unit tests, while the
AbuseFilterSaveTest class is refactored to avoid using the DB and to use
a lot more of mocks and DI.
Depends-On: I22743557e162fd23b3b4e52951a649d8c21109c8
Change-Id: Id8412e2b8a4e873fd4821ecc1a3c95710be9a870
While this is not as important as throwing for too few parameters, IMHO
it's still important to fail in this case. Mostly because if a function
receives too many parameters, chances are that who wrote the filter
didn't do that intendedly, and thus there may be a hidden bug.
Bonus: fix a few docblocks.
Bug: T230803
Change-Id: Iac2931f17b50ace8c8f4c2faa44b3f54ca134c54
In general, it's not safe to change configuration in the middle of a
test, because services could wind up in an inconsistent state. In
particular, I'm trying to have setMwGlobals() reset services, which will
cause stuff to break if it happens in the middle of a test. So just
specify the settings you want up front, like in setUp().
Change-Id: I00e35ecea6a27468674b2a6e7d9d9eb6518e3bd5
